Fisher-Price K7165 User manual

Please keep this instruction
sheet for future reference, as it
contains important information.
Requires three “AA”batteries
(included).
Adult assembly is required.
Tool required for assembly:
Phillips screwdriver
(not included).
Learning
Mower™
www.fisher-price.com
K7165

Please keep small parts such as
the plastic tab out of children’s reach.
Throw the plastic tab away.
CAUTION
Note: A plastic tab is attached to the toy for in-store
demonstration purposes. While the tab may have already
been removed, check the bottom of the toy to be sure.
If the plastic tab is still attached, pull and remove the tab.
Throw the plastic tab away.
Before Use
Assembly
Handle
• Fit the handle to the mower base.
Parts
Handle Mower Base
Cap - 2
#6 x 3/4" (1.9 cm) Screw - 2
Shown Actual Size
• Fit a cap onto each side of the handle.
• Insert a screw into each cap and tighten the screw with a
Phillips screwdriver. Do not over-tighten.
Cap
Cap
1
2
This package contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
Mower Base

Battery Safety Information
In exceptional circumstances, batteries may leak fluids
that can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
•
Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use.
Always remove exhausted batteries from the product.
Dispose of batteries safely. Do not dispose of this product
in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are
only to be charged under adult supervision.
For best performance, we recommend replacing the
batteries that came with this toy with three, new “AA”
(LR6) alkaline batteries.
• Loosen the screw in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door.
• Insert three “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for
longer battery life.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
• When sounds or lights from this toy become faint or stop,
it’s time for an adult to change the batteries!
Battery Replacement
1.5V x 3
“AA” (LR6)
• Protect the environment by not disposing of this
product with household waste (2002/96/EC).
Check your local authority for recycling advice
and facilities (Europe only).

Let's Get Mowin' with Music and Fun!
Music Mode
• Push the mower for a fun song.
• Push or pull the handle or turn
the dial to hear musical ditties.
Learning Mode
• Push the mower to hear
phrases or a learning song.
• Push or pull the handle to
learn opposites.
• Turn the dial to learn counting
or hear phrases.
Imagination
• Push the mower to hear
realistic mower sounds.
• Push or pull the handle and
hear the sounds of a mower
starting up or shutting off.
• Turn the dial for another fun
sound effect.
Locate the volume switch on bottom of the toy.
Adjust volume to high or low , for your
child's comfort.
Slide the mode switch to
Learning Mode ,
Music Mode , or
Imagination .
When your child is finished
playing with this toy, slide
the mode switch Off .

Consumer Information
Visit us on line at www.service.fisher-price.com
Call Fisher-Price®Consumer Relations, toll-free at
1-800-432-5437, 9 AM - 7 PM EST Monday through Friday
and 11 AM - 5 PM Saturday. Hearing-impaired consumers
using TTY/TDD equipment, please call 1-800-382-7470.
Write to us at: Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.
FCC Statement
(United States Only)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
Care
• Wipe this toy with a clean cloth dampened with a mild
soap and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take
this toy apart.