Fisher-Price W9913 User manual

www.fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool required for assembly: Phillips screwdriver (not included).
W9913

2
Consumer Information
WARNING
Prevent Entanglement Injury
Crib Mobile Use
•Keepoutofbaby'sreach.
•Removemobilefromcriborplaypenwhenbabybeginstopushupon
hands and knees.
•Thisproductmaynotattachtoallcribdesigns.Donotaddadditional
stringsorstrapstoattachtoacriborplaypen.
Stroller Toy Use
•Donotattachlinkdirectlytocriborplaypen.
CAUTION
•Thispackagecontainssmallpartsinitsunassembledstate.Adult
assembly is required.
Important Information
•Useasamobilefrombirthuntil5months.
•Amobileisintendedforvisualstimulationandnottobegraspedbyachild.
•Whenusedasamobile,alwaysattachwithallprovidedfasteners(strings,straps,clamps,
etc.)tightlytothecriborplaypenaccordingtotheinstructions.Checkfrequently.

3
Assembled Parts
Top Arm
Mobile
Mobile Link
Giraffe
Screw is shown actual size.
Tighten all screws with a Phillips screwdriver.
Do not over-tighten the screws.
M3,5 x 20 mm Screw – 5
Mobile Link Cover
Bottom Arm
Base

4
Assembly
•Fitthebottomarmintothesocketinthebackofthebase.
Hint: You may need to pull the attachment strap on the base down to fit the arm in
the base.
1
1
Bottom Arm
Socket
•Insertascrewintothearmandtighten.
1
2

5
Assembly
•Fitthetoparmontothebottomarm.
1
3
Top Arm
Bottom Arm

6
•Insertfourscrewsintothearmassemblyandtighten.
•First,alignthetabsonthearmwiththeslotsinthegiraffe.
•Then,turnthegiraffeto"snap" in place.
1
4
15
FisherPrice,Inc.,asubsidiaryofMattel,Inc.,EastAurora,NY14052U.S.A.
©2011Mattel,Inc.AllRightsReserved.®and™designateU.S.trademarksofMattel,Inc.
PRINTED IN CHINA W9913pr-0920
Assembly
Tabs
Slots

7
Assembly
•Fittheflatendofthemobilelinkintothegrooveinthemobile.
•Fitthemobilelinkcoverontothetopofthemobile.
•Tightenthescrews.
Note: The screws are assembled to the mobile link cover.
1
6
1
7
Mobile Link
Mobile Groove
Mobile Link Cover
Mobile Link

8
Assembly
•Fittheendsofthemobilelinkontothemobilearm.
•Pushto“snap” the link in place.
1
8
Mobile Arm
Mobile Link

9
1
1
Mobile Use Crib Attachment
IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.) tightly
to a crib or playpen according to the instructions. Do not add additional strings or
straps to attach to a crib. Check frequently.
IMPORTANT!Ifyouareattachingthistoytoacribsiderailthatcanbeloweredandraised,
make sure the crib side rail is in the raised (locked) position whenever a child is in the crib.
•Positionthetoyinsidethecrib.
•Wrapthetoy’sattachmentstraparoundthecribtophorizontalrail.
•Slidetheendoftheattachmentstrapthroughtheslotonthebackofthetoy.
•Pulltheendoftheattachmentstrapupandfastentotheslotonthepegonthebackof
the toy.
Note:Thistoyshouldbesnugagainstthecribrailandspindles.Usethestrapslotthat
providesthetightestfit.
•Ifyouhaveexcessstrap,slidethefreeendoftheattachmentstrapundertheslotatthe
top of the attachment strap.
Crib Rail
Attachment Strap
Slot
Peg

10
Mobile Use Crib Attachment
•Makesurethedistancebetweenthebottomoftheproductandthecribmattressis
at least 7 inches (18 cm).
•Ifthedistanceislessthan7inches(18cm):readjusttheattachmentstrapstoliftthe
product; or lower the crib mattress.
1
3
Mattress
Crib Spindle
Bottom of Base At Least 7 Inches (18 cm)
•Tiethetoy’sstringstoacribspindle.
Note:Itisbettertotiethestringsinaknotthanabow,sinceabowmaybeeasilyuntied.
1
2