Floe SHOREWAY QUICK PIVOT User manual

ASSEMBLY INSTRUCTIONS
SHOREWAY QUICK PIVOT
QUICK ATTACH ROLL-IN DOCKS
TOOLS REQUIRED
•(2) 9/16” SOCKETS/WRENCHES
•TORQUE WRENCH
For more information, go to the owner support tab on the FLOE website
1
*DOCK SECTION & SHORE END WHEEL KIT NOT INCLUDED

2
BILL OF MATERIALS/EXPLODED VIEW
QUICK ATTACH SHOREWAY QUICK PIVOT
NUMBER PART NUMBER QTY. DESCRIPTION
1 110-09100-00 2 ASS’Y, QA ROLL-IN SHOREWAY QUICK PIVOT
1A 001-26729-00 1 PIN, QUICK RELEASE W/ RING GRIP 2-3/4” LONG
1B 001-70114-00 1 HHCS, 3/8-16 X 2-3/4” 18-8 SS
1C 001-71017-00 2 FLAT WASHER, 3/8” SAE 18-8 SS
1D 001-76349-00 1 NUT, 3/8-16 ALUM.
1E 002-08073-00 1 QUICK PIVOT, QA ROLL-IN SHOREWAY - 2”

3
INSTALLATION
INSTALL THE QUICK PIVOT ON THE END OF THE DOCK/SHOREWAY WITHOUT SUPPORTS AS
SHOWN (EXAMPLE: IF THE DOCK SECTION THAT THE SHOREWAY IS CONNECTING TO HAS A
WHEEL KIT ON THE END WHERE THE ATTACHING SHOREWAY IS TO BE, BOLT QUICK PIVOT TO
SHOREWAY) (FIGURE 1.1). PLACE THE QUICK PIVOT AS CLOSE TO THE OUTSIDE OF THE DOCK AS
POSSIBLE AND TORQUE NUT TO 25 FT-LB (FIGURE 1.2).
FIGURE 1.1
FIGURE 1.2
2X
2X

4
REFER TO THE FIGURES BELOW FOR POSITIONING OF THE QUICK PIVOT. IF THE SHOREWAY IS
ANGLED DOWN, MAKE SURE THE END THAT IS INSERTED INTO QUICK PIVOT IS TO THE INNER
PORTION OF THE QUICK PIVOT. IF THE SUPPORTS ARE ON THE SHOREWAY, REVERSE THE
ORIENTATION OF THE QUICK PIVOTS. INSERT PIN INTO THE QUICK PIVOT.
FIGURE 1.3
FIGURE 1.4
FIGURE 1.4A
DO NOT EXCEED SAFE IN-
CLINE OR DECLINE. FAILURE
TO DO SO MAY RESULT IN
PROPERTY DAMAGE, BODILY
INJURY, OR DEATH.
2X
2X

5
DO NOT EXCEED SAFE IN-
CLINE OR DECLINE. FAILURE
TO DO SO MAY RESULT IN
PROPERTY DAMAGE, BODILY
INJURY, OR DEATH.
REFER TO THE FIGURES BELOW FOR POSITIONING OF THE QUICK PIVOT. IF THE SHOREWAY IS
ANGLED UP, MAKE SURE THE END THAT IS INSERTED INTO QUICK PIVOT IS TO THE OUTER POR-
TION OF THE QUICK LOOP. IF THE SUPPORTS ARE ON THE SHOREWAY, REVERSE THE
ORIENTATION OF THE QUICK PIVOTS. INSERT PIN INTO THE QUICK PIVOT.
FIGURE 1.5A
FIGURE 1.5
2X

8
NOTES

NOTES
11

8
FLOE INTERNATIONAL, INC.
48473 STATE HIGHWAY 65 • McGREGOR, MN 55760
www.floeintl.com
All material copyright © 2022 FLOE International, Inc.
Specifications subject to change without notice.
P/N 610-08100-00 10/13/22