Floe 510-89304-00 User manual

ASSEMBLY INSTRUCTIONS
STABILIZING HAND RAIL
FLOATING DOCKS
4’ HAND RAIL P/N 510-89304-00
5’ HAND RAIL P/N 510-89305-00
6’ HAND RAIL P/N 510-89306-00
8’ HAND RAIL P/N 510-89308-00
10’ HAND RAIL P/N 510-89310-00
12’ HAND RAIL P/N 510-89312-00
16’ HAND RAIL P/N 510-89316-00
TOOLS REQUIRED
•9/16” SOCKET/WRENCH
•TORQUE WRENCH
• TAPE MEASURE
For more information, go to the owner support tab on the FLOE website
1
*DOCK NOT INCLUDED
WARNING!
THESE HAND RAILS ARE INTENDED TO ASSIST IN MAINTAINING STABILITY WHILE WALKING
ON THE DOCK SECTION. THE HAND RAILS ARE NOT A SAFETY GUARD RAIL AND ARE NOT
INTENDED FOR PREVENTING CHILDREN AND ADULTS FROM FALLING IN THE WATER.

2
BILL OF MATERIALS
HAND RAIL, FLOATING DOCK
NUMBER PART NUMBER QTY. DESCRIPTION
*1 001-89312-00
OR
001-89316-00
1 HARDWARE, FLOATING DOCK HAND RAIL 4’ - 12’
OR
HARDWARE, FLOATING DOCK HAND RAIL - 16’
1A 001-70105-00 16 (4’-12’)
24 (16’)
HHCS, 3/8-16 X 1” 18-8 SS
1B 001-71017-00 16 (4’-12’)
24 (16’)
FLAT WASHER, 3/8” SAE SS 18-8
1C 001-76071-00 16 (4’-12’)
24 (16’)
NUT, NYLOCK 3/8-16 ALUM.
2 SEE LIST 1 ASS’Y, FLOATING DOCK HAND RAIL
(INCLUDES (1) OF ITEM #2A-2G & ITEM #3)
3 010-00300-00 2 CAP, GREY 1.25” X 1.75” X 3” W/ HOLE
*THERE MAY BE EXTRA HARDWARE, DEPENDING ON THE SIZE OF HAND RAIL YOU HAVE
NUMBER KIT NUMBER PART NUMBER QTY. DESCRIPTION
2 510-89304-00 110-00531-00 1 ASS’Y, STD. SCTN’L/FLT. DOCK HAND RAIL-4’
2A 110-00530-00 1 WELD’T, STD. SCTN’L/FLT. DOCK HAND RAIL-4’
2 510-89305-00 110-00529-00 1 ASS’Y, STD. SCTN’L/FLT. DOCK HAND RAIL-5’
2B 110-00528-00 1 WELD’T, STD. SCTN’L/FLT. DOCK HAND RAIL-5’
2 510-89306-00 110-00527-00 1 ASS’Y, STD. SCTN’L/FLT. DOCK HAND RAIL-6’
2C 110-00526-00 1 WELD’T, STD. SCTN’L/FLT. DOCK HAND RAIL-6’
2 510-89308-00 110-00525-00 1 ASS’Y, STD. SCTN’L/FLT. DOCK HAND RAIL-8’
2D 110-00524-00 1 WELD’T, STD. SCTN’L/FLT. DOCK HAND RAIL-8’
2 510-89310-00 110-00523-00 1 ASS’Y, STD. SCTN’L/FLT. DOCK HAND RAIL-10‘
2E 110-00522-00 1 WELD’T, STD. SCTN’L/FLT. DOCK HAND RAIL-10’
2 510-89312-00 110-00521-00 1 ASS’Y, STD. SCTN’L/FLT. DOCK HAND RAIL-12’
2F 110-00520-00 1 WELD’T, STD. SCTN’L/FLT. DOCK HAND RAIL-12’
2 510-89316-00 110-00519-00 1 ASS’Y, STD. SCTN’L/FLT. DOCK HAND RAIL-16’
2G 110-00518-00 1 WELD’T, STD. SCTN’L/FLT. DOCK HAND RAIL-16’

EXPLODED VIEW (16’ HAND RAIL IS SHOWN)
3

ASSEMBLY (16’ HAND RAIL IS SHOWN)
PLACE A WASHER ONTO EACH BOLT, THEN PLACE THEM INTO THE TRACKS ON THE SIDE OF THE
DOCK. MATCH THE AMOUNT OF BOLTS AND WASHERS REQUIRED TO THE NUMBER OF MOUNT-
ING HOLES ON THE HAND RAIL (4 PER BRACKET) (FIGURE 1.1). SLIDE THE BOLTS AND WASHERS
INTO THEIR APPROXIMATE LOCATION ON THE DOCK SIDE (FIGURE 1.2).
4
FIGURE 1.1
FIGURE 1.2

POSITION THE HAND RAIL ON THE DOCK SIDE SO THAT THERE IS AN EQUAL DISTANCE ON
BOTH ENDS OF THE DOCK BETWEEN THE END OF THE DOCK TO THE BRACKET (FIGURE 1.3).
PLACE THE HAND RAIL ONTO THE BOLTS BY ALIGNING THE HOLES ON THE MOUNTING
BRACKETS (FIGURE 1.4).
FIGURE 1.3
FIGURE 1.4
5

6
PLACE A 3/8” NYLOCK NUT ONTO EACH BOLT (FIGURE 1.5). TORQUE ALL NUTS TO 30 FT-LB
(FIGURE 1.6).
FIGURE 1.5
FIGURE 1.6

NOTES
7

8
FLOE INTERNATIONAL, INC.
48473 STATE HIGHWAY 65 • McGREGOR, MN 55760
www.floeintl.com
All material copyright © 2022 FLOE International, Inc.
Specifications subject to change without notice.
P/N 610-89300-00 11/01/22