Fluke 1503 User manual

Technical Data
•Repetitive or hard-to-reach
testing is easy with the remote
test probe
•Live circuit detection prevents
insulation test if voltage
> 30 V is detected for added
user protection
•Auto-discharge of capacitive
voltage for added user protection
•AC/DC voltage: 0.1 V to 600 V
•200 mA Continuity
•Resistance: 0.01 Ωto 20.00 KΩ
•Save battery power with auto
power off
1507/1503
Insulation Testers
Features and benefits:
•Insulation test range:
••1507: 0.01 MΩto 10 GΩ
••1503: 0.1 MΩto 2000 MΩ
•Insulation test voltages:
••1507: 50 V, 100 V, 250 V,
500 V, 1000 V
••1503: 500 V, 1000 V
•Save both time and money with
Automatic calculation of Polar-
ization Index and Dielectric
Absorption Ratio
•Make repetitive tests simple and
easy with the 1507’s Compare
(Pass/Fail) function (only avail-
able on the 1507)
The Fluke 1507 and 1503 Insulation
Testers are compact, rugged, reliable,
and easy to use. With their multiple
test voltages, they are ideal for many
troubleshooting, commissioning, and
preventative maintenance applications.
Additional features, like the remote
probe on these tools save both time
and money when performing tests.
•Read measurements easily with
large, backlit display
•CAT IV 600 V overvoltage
category rating for added user
protection
•Remote probe, test leads, probes
and alligator clips included with
each tester
•Accepts optional Fluke TPAK
magnetic hanging system to free
your hands for other work
•Four AA alkaline batteries (NEDA
15 A or IEC LR6) for at least
1000 insulation tests
•One-year warranty

AC/DC voltage measurement
Accuracy
Range Resolution 50 Hz to 400 Hz
± (% of Rdg + Digits)
600.0 V 0.1 V ± (2 % + 3)
Input impedance: 3 MΩ(nominal), < 100 pF
Common mode rejection ratio (1 kΩunbalanced): > 60 dB at dc, 50 or 60 Hz
Overload protection: 600 V rms or dc
Earth bond resistance measurement
Range Resolution Accuracy1
+ (% of Rdg + Digits)
20.00 Ω0.01 Ω
200.0 Ω0.1 Ω
± (1.5 % + 3)
2000 Ω1 Ω
20.00 kΩ0.01 kΩ
1Accuracies apply from 0 to 100 % of range.
Overload protection: 2 V rms or dc
Open circuit test voltage: > 4.0 V, < 8 V
Short circuit current: > 200.0 mA
Insulation specifications
Measurement range: 0.01 MΩto 10 GΩmodel 1507, 0.01 MΩto 2000 MΩmodel 1503
Test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
Test voltage accuracy: + 20 %, - 0 %
Short-circuit test current: 1 mA nominal
Auto discharge: Discharge time < 0.5 second for C = 1 µF or less
Live circuit detection: Inhibit test if terminal voltage > 30 V prior to initialization of test
Maximum capacitive load: Operable with up to 1 µF load
1507/1503 Specifications
Accuracy (Model 1507)
Output Voltage Display Range Resolution Test Current Accuracy
±(% of Rdg + Digits)
50 V 0.01 MΩto 20.00 MΩ0.01 MΩ1 mA @ 50 kΩ±(3 % + 5)
(0 % to + 20 %) 20.0 MΩto 50.0 MΩ0.1 MΩ
100 V 0.01 MΩto 20.00 MΩ0.01 MΩ1 mA @ 100 kΩ± (3 % + 5)
(0 % to + 20 %) 20.0 MΩto 100.0 MΩ0.1 MΩ
250 V 0.01 MΩto 20.00 MΩ0.01 MΩ1 mA @ 250 kΩ± (1.5 % + 5)
(0 % to + 20 %) 20.0 MΩto 200.0 MΩ0.1 MΩ
500 V 0.01 MΩto 20.00 MΩ0.01 MΩ
(0 % to + 20 %) 20.0 MΩto 200.0 MΩ0.1 MΩ1 mA @ 500 kΩ± (1.5 % + 5)
200 MΩto 500 MΩ1 MΩ
1000 V 0.1 MΩto 200.0 MΩ0.1 MΩ±(1.5 % + 5)
(0 % to + 20 %) 200 MΩto 2000 MΩ1 MΩ1 mA @ 1 MΩ
2.0 GΩto 10.0 GΩ0.1 GΩ±(10 % + 3)
2 Fluke Corporation 1507/1503 Insulation Testers

3 Fluke Corporation 1507/1503 Insulation Testers
Accuracy (Model 1503)
Output Voltage Display Range Resolution Test Current Accuracy
± (% of Rdg + Digits)
500 V 0.1 MΩto 20.00 MΩ0.01 MΩ
(0 % to + 20 %) 20.0 MΩto 200.0 MΩ0.1 MΩ1 mA @ 500 kΩ± (2.0 % + 5)
200 MΩto 500 MΩ1 MΩ
1000 V 0.1 MΩto 200.0 MΩ0.1 MΩ1 mA @ 1 MΩ± (2.0 % + 5)
(0 % to + 20 %) 200 MΩto 2000 MΩ1 MΩ
The following tables are a requirement for European labeling.
Measurement Intrinsic Uncertainty Operating Uncertainty1
Volts ± (2.0 % + 3) 30 %
Earth Bond Resistance ± (1.5 % + 3) 30 %
Insulation Resistance Depends on test voltage and range. 30 %
See Insulation Test specifications.
1This specification comes from the standard and indicates the maximum amount allowable by the standard.
EN61557 influence variables and uncertainties
Earth Bond Resistance Uncertainty for Uncertainty for
Influence Variable Designation per EN61557 Insulation Resistance Earth Bond Resistance
Supply Voltage E2 5 % 5 %
Temperature E3 5 % 5 %
1Specification confidence level 99 %.
EN61557 Specifications
The following tables can be used to determine the maximum or minimum display values considering maximum
instrument operating error per EN61557-1, 5.2.4.
Insulation resistance maximum and minimum display values
50 V 100 V 250 V 500 V 1000 V
Minimum Minimum Minimum Minimum Minimum
Limit Value Display Limit Value Display Limit Value Display Limit Value Display Limit Value Display
Value Value Value Value Value
0.05 0.07 0.05 0.07 0.05 0.07 0.05 0.07
0.06 0.08 0.06 0.08 0.06 0.08 0.06 0.08
0.07 0.09 0.07 0.09 0.07 0.09 0.07 0.09
0.08 0.10 0.08 0.10 0.08 0.10 0.08 0.10
0.090.120.090.12 0.09 0.12 0.09 0.12
0.1 0.13 0.1 0.13 0.1 0.13 0.1 0.13 0.1 0.1
0.2 0.26 0.2 0.26 0.2 0.26 0.2 0.26 0.2 0.3
0.3 0.39 0.3 0.39 0.3 0.39 0.3 0.39 0.3 0.4
0.4 0.52 0.4 0.52 0.4 0.52 0.4 0.52 0.4 0.5
0.5 0.65 0.5 0.65 0.5 0.65 0.5 0.65 0.5 0.7
0.6 0.78 0.6 0.78 0.6 0.78 0.6 0.78 0.6 0.8
0.7 0.91 0.7 0.91 0.7 0.91 0.7 0.91 0.7 0.9
0.8 1.04 0.8 1.04 0.8 1.04 0.8 1.04 0.8 1.0
0.9 1.1
70.9 1.17 0.9 1.17 0.9 1.17 0.9 1.2
1.0 1.30 1.0 1.30 1.0 1.30 1.0 1.30 1.0 1.3
2.0 2.60 2.0 2.60 2.0 2.60 2.0 2.60 2.0 2.6
3.0 3.90 3.0 3.90 3.0 3.90 3.0 3.90 3.0 3.9
4.0 5.20 4.0 5.20 4.0 5.20 4.0 5.20 4.0 5.2
5.0 6.50 5.0 6.50 5.0 6.50 5.0 6.50 5.0 6.5
6.0 7.80 6.0 7.80 6.0 7.80 6.0 7.80 6.0 7.8

4 Fluke Corporation 1507/1503 Insulation Testers
EN61557 Specifications cont.
Insulation resistance maximum and minimum display values cont.
50 V 100 V 250 V 500 V 1000 V
Minimum Minimum Minimum Minimum Minimum
Limit Value Display Limit Value Display Limit Value Display Limit Value Display Limit Value Display
Value Value Value Value Value
7.0 9.10 7.0 9.10 7.0 9.10 7.0 9.10 7.0 9.1
8.0 10.40 8.0 10.40 8.0 10.40 8.0 10.40 8.0 10.4
9.0 11.70 9.0 11.70 9.0 11.70 9.0 11.70 9.0 11.7
10.0 13.0 10.0 13.0 10.0 13.0 10.0 13.0 10.0 13.0
20.0 26.0 20.0 26.0 20.0 26.0 20.0 26.0 20.0 26.0
30.0 39.0 30.0 39.0 30.0 39.0 30.0 39.0 30.0 39.0
40.0 52.0 40.0 52.0 40.0 52.0 40.0 52.0 40.0 53.0
50.0 65.0 50.0 65.0 50.0 65.0 50.0 65.0
60.0 78.0 60.0 78.0 60.0 78.0 60.0 78.0
70.0 91.0 70.0 91.0 70.0 91.0 70.0 91.0
80.0 104.0 80.0 104.0 80.0 104.0 80.0 104.0
90.0 117.0 90.0 117.0 90.0 117.0 90.0 117.0
100.0 130.0 100.0 130.0 100.0 130.0
200.0 260.0 200.0 260.0
300.0 390.0 300.0 390.0
400.0 520.0 400.0 520.0
500.0 650.0
600.0 780.0
700.0 910.0
800.0 1040.0
900.0 1170.0
1000.0 1300.0
2000.0 2600.0
Earth bond resistance maximum display values
Limit Value Maximum Display Value
0.4 0.28
0.5 0.35
0.6 0.42
0.7 0.49
0.8 0.56
0.9 0.63
1.0 0.7
2.0 1.4
3.0 2.1
4.0 2.8
5.0 3.5
6.0 4.2
7.0 4.9
8.0 5.6
9.0 6.3
10.0 7.0
20.0 14.0
30.0 21.0
40.0 28.0
50.0 35.0
60.0 42.0
70.0 49.0
80.0 56.0
90.0 63.0
Limit Value Maximum Display Value
100.0 70.0
200.0 140.0
300.0 210.0
400.0 280.0
500.0 350.0
600.0 420.0
700.0 490.0
800.0 560.0
900.0 630.0
1000.0 700.0
2000.0 1400.0

5 Fluke Corporation 1507/1503 Insulation Testers
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com/
©2005 Fluke Corporation. All rights reserved.
Printed in U.S.A. 5/2005 2461441 D-US-N Rev A
Fluke. Keeping your world
up and running.
Fluke-1507 Insulation Tester
Fluke-1503 Insulation Tester
Included
Remote probe, test leads, test
probes, alligator clips, holster,
user documentation
Optional accessories
TPAK™Magnetic Tool Hanger
C101Hard Case
TLK225 SureGrip Master
Accessory Kit
Maximum voltage applied to any terminal:
600 V ac rms or dc
Storage temperature: -40 °C to 60 °C
(-40 °F to 140 °F)
Operating temperature: -20 °C to 55 °C
(-4 °F to 131 °F)
Temperature coefficient: 0.05 x (specified accuracy)
per °C for temperatures < 18 °C or > 28 °C
(< 64 °F or > 82 °F)
Relative humidity noncondensing:
0 % to 95 % @ 10 °C to 30 °C (50 °F to 86 °F)
0 % to 75 % @ 30 °C to 40 °C (86 °F to 104 °F)
0 % to 40 % @ 40 °C to 55 °C (104 °F to 131 °F)
Vibration: Random, 2 g, 5-500 Hz per
MIL-PRF-28800F, Class 2 instrument
Shock: 1 meter drop per IEC 61010-1 2nd Edition
(1 meter drop test, six sides, oak floor)
Electromagnetic compatibility:In an RF field of
3 V/M, accuracy = specified accuracy
(EN 61326-1:1997)
Safety: Complies with ANSI/ISA 82.02.01 (61010-1)
2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN
61010-1 2nd Edition for measurement category IV
600 V (CAT IV)
Certifications: CSA per standard CSA/CAN C22.2
No. 61010.1-04; TUV per standard IEC/EN 61010-1
2nd Edition
Batteries: Four AA batteries (NEDA 15A or IEC LR6)
Battery life
Insulation test use: Tester can perform at least 1000
insulation tests with fresh alkaline batteries at room
temperature. These are standard tests of 1000 V into
1 MΩwith a duty cycle of 5 seconds on and 25 sec-
onds off.
Resistance measurements: Tester can perform at least
2500 earth bond resistance measurements with fresh
alkaline batteries at room temperature. These are
standard tests of 1 Ωwith a duty cycle of 5 seconds
on and 25 seconds off.
Size: 5.0 cm H x 10.0 cm W x 20.3 cm L
(1.97 in H x 3.94 in W x 8.00 in L)
Weight: 550 g (1.2 lb)
IP rating: IP40
Altitude
Operating: 2000 m CAT IV 600 V,
3000 m CAT III 600 V
Non-operating (storage): 12,000 m
Over-range capability: 110 % of range
Included accessories: TL224 Test Leads, TP74 Test
Probes, clips PN 1958654 (red) and PN 1958646
(black), holster and remote probe
Ordering Information
1507/1503 General Specifications
TPA K C101 i1010-Kit