Frico ICW Series Parts list manual

ICW15-30
ICS15-30
ICB8-12
.... 6
SE ....38 FR
.... 22
NO .... 30 DE
.... 14
GB
.... 54
ES .... 70 PL
.... 62
IT
.... 46
NL

ICW/ICS/ICB
2
A
231
228
A
209
238
ICW/ICB
ICS
Type A
ICS15 746
ICS20 854
ICS30 1070
Type A
ICW15 783
ICW20 891
ICW30 110 7
ICB8 729
ICB10 729
ICB12 729

ICW/ICS/ICB
3
Type E-nr [SE] EL-nr [NO]
ICPP20 L: 2 m
ICPB
ICAP15 85 701 55 L: 1,5 m
ICAP20 85 701 56 L: 2 m
ICUB 85 701 57
ICAB 85 701 58
Accessories
ICPP20
ICAP
ICUB
ICPB
ICAB

ICW/ICS/ICB
4
Wiring diagrams IC
ICW/ICS
ICB
Output selector
Output selector
Thermostat
Thermostat

ICW/ICS/ICB
5
Technical specifications | Carboninfra ICW with wide heat distribution, installation height 1.8 – 2,5 m 3
Type E-nr (SE) EL-nr (NO) Heat
output
[W]
Voltage
[V]
Amperage
[A]
Max. filament
temperature
[°C]
Weight
[kg]
ICW15 85 701 50 1500 230V~ 6,5 1200 +/-100 5,0
ICW20 85 701 51 2000 230V~ 8,7 1200 +/-100 5,2
ICW30 85 701 52 3000 230V~ 13 1200 +/-100 6,3
Technical specifications | Carboninfra ICS with directed heat distribution, installation height 1,8 – 3,5 m 3
Type E-nr (SE) EL-nr (NO) Heat
output
[W]
Voltage
[V]
Amperage
[A]
Max. filament
temperature
[°C]
Weight
[kg]
ICS15 1500 230V~ 6,5 1200 +/-100 5,0
ICS20 2000 230V~ 8,7 1200 +/-100 5,2
ICS30 3000 230V~ 13 1200 +/-100 6,3
Technical specifications | Carboninfra ICB for bathrooms, installation height 0,4 – 2,5 m 3
Type E-nr (SE) EL-nr (NO) Heat
output
[W]
Voltage
[V]
Amperage
[A]
Max. filament
temperature
[°C]
Weight
[kg]
ICB8 800 230V~ 3,5 1000 +/-100 4,7
ICB10 85 701 54 1000 230V~ 4,3 1000 +/-100 4,7
ICB12 1200 230V~ 5,2 1000 +/-100 4,7
Protection class IC, horizontal position: (IP44), splash-proof design.
CE compliant.

ICW/ICS/ICB
14
GB
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The product may only be used as set out in
the assembly and operating instructions. The
guarantee is only valid if the product is used
in the manner intended and in accordance
with the instructions.
Application
Carboninfra IC provides a smooth and direct
heat that fits well on terraces and balconies.
IC is also ideal for spot heating, both indoors
and in more protected areas outdoors. The
heat lamps in IC have a very long service
life, the operating time is up to 10 000 h.
ICW gives a comfortable heat in the occupied
zone from close range and also wider heat
distribution. ICS has more direct heat
distribution and is designed to be installed
higher up.
ICB is a radiant heater for bathrooms.
All models can be installed vertically as well
as horizontally and has an integrated output
selector and thermostat.
Protection class, horizontal position: IP44
Assembly and operation instructions

ICW/ICS/ICB
15
GB
Control
Output selector
Off
Upper element
on, 50% power
Lower element
on, 50% power
Both element
on, 100% power
Thermostat
Control
room thermostat
+5 – +35 °C +/- 1 °C
Max thermostat
setting
approximately 60 °C
Mounting
> 1,8 m
Bathroom
> 0,4 m
no no
yes no
yes no
yes yes, one element
Thermostat function
Constituent parts
ICW
ICS
Bracket
Reflector
Wide angle
80°
Reflector
Spot angle
50°
Universal
holder
Double
IR-carbon-
element
Medium wave
Double
IR-carbon-
element
Medium wave
Horizontal
or vertical
mounting
Ventilating
body
Ventilating
body
Radiant angle
30° – 0° – 30°
Front grid
metal
Front grid
metal
Connection
box

ICW/ICS/ICB
16
GB
Rip for
horizontal
position Rip for
vertical
position
Bracket
Rotating to horizontal or vertical position on wall or stand
Rotating from
horizontal to vertical
position, 90°.
Note: Only clockwise.
The heater must
be off and the plug
pulled from the
socket. When rotating
the heater, the metal
body should be
carefully touched by
hand.
Rotating from
vertical to horizontal
position, 90°.
Note: Only
anticlockwise.

ICW/ICS/ICB
17
GB
Screw DIN 7505 D 5 x 60
Plug D 8 PE 8 x 40
Screw DIN 7505 D 5 x 60
Plug max 250 mm D 8 PE 8 x 40
After assembly and after the
radiation angle is set, tighten
the screws.
After assembly and after the
radiation angle is set, tighten
the screws.
Mounting
Wall or ceiling mounting with the bracket
Wall or ceiling mounting with the bracket and aluminium profile ICAP
Mounting of bracket on post ICPP with stand foot ICPB
Max
250 mm
74 mm
102 mm
ø8 mm
Note: Please observe minimum mounting distance
in the manual.

ICW/ICS/ICB
18
GB
ICW/ICS15-20: 3x1,0 mm2
ICB8-12: 3x1,0 mm2
ICW/ICS30: 3x1,5 mm2
Should only be replaced by a qualified electrician.
Cover must be used.
Cover must be used.
Terminal block
Cable holder
The installation, which should be preceded by an omnipolar
switch with a contact separation of at least 3 mm, should only be
wired by a competent electrician and in accordance with the
latest edition of IEE wiring regulations.
A Built-in
B On surface
Electric installation
Cable and plug
Fixed installation

ICW/ICS/ICB
19
GB
ICW/ICS15-20: min 30 cm,
ICW/ICS30: min 50 cm
Minimum mounting distance ICW15-30 och ICS15-30
Wall mounting of ICW15-30 and ICS15-30
Ceiling mounting of ICW15-30 and ICS15-30
Mounting on stand of ICW15-30 and ICS15-30
Min
40 cm
Min
40 cm
Min 10 cm
Min
50 cm
Min
50 cm
min 1,8 m
Min 1,8 m from floor
Min 1,8 m
from floor
Min 1,5 m
to textiles
and furniture.
Possible to turn
vertically
Min 2,2 m from floor
Horizontal mounting Vertical mounting
Adjustable radiant
angle
Adjustable radiant
angle
Radiant angle
30°

ICW/ICS/ICB
20
GB
ICB8-12: min 30 cm
Minimum mounting distance ICB8-12
Wall mounting of ICB8-12
Ceiling mounting of ICB8-12
Minimum mounting distance to water equipment in Bath and wet rooms
Min
40 cm
Min
30 cm
Min 10 cm
Min
30 cm
Min
30 cm
min 0,4 m
Min 0,4 m from floor
Min 1 m
Min 2,2 m from floor
Distance to bath tub, shower, wash
basin and other water equipment
and min 1 m over the wash basin
(Follow local regulations for use in
bath and wet rooms)
Note:
Min 2 m to swimming pools
Horizontal mounting Vertical mounting
Adjustable radiant
angle
Adjustable radiant
angle
Adjustable radiant
angle

ICW/ICS/ICB
21
GB
Maintenance
Note! When using for the first time or when
starting up after a long period of disuse, a
small amount of smoke and a slight odour
may occur temporarily, which is completely
normal.
The power supply to the unit must be
disconnected during all service, repair and
maintenance work.
The unit has no moving parts so the
maintenance requirement is small, but it
must be kept clean and free from dust and
dirt. If the reflector is not clean the thermal
radiation from the unit will decrease and the
heater will become hotter. A large amount of
dirt can cause overheating.
The surface of the reflector is sensitive and
must be cleaned with care. If the reflector
is dirty it must be cleaned or replaced by a
specialist.
Safety
• During operation the surfaces of the unit
are hot!
• The unit must not be fully or partially
covered with inflammable materials, as
overheating can result in a fire risk!
• This product is not designed to be used
by children or persons with reduced
physical or mental ability or a lack
of experience and knowledge, unless
instruction regarding the product's
use has been given by a person with
responsibility for their safety or that this
person supervises operation. Children
must be kept under supervision to ensure
they do not play with the product.
• The heater is equipped with a protective
grille to prevent contact or to prevent
large objects from touching the hot lamp.
The unit must not be used without this
protective grille.
• Ensure that there are no inflammable
materials gathered on or close to the
heater.
• The free space to the inflammable
material in the direction of radiation
must be at least 1,5 meter.
• Do not place the heater directly under the
electrical socket.
• The cable and plug must not be exposed
to the heat from this appliance.
• Do not use timer that switches the heater
on automatically since a fire risk exists
if the heater is covered or positioned
incorrectly.
Assembly and disassembly of the front grid

20120208 HH/20120208 LT
Main office
Frico AB Tel: [phone]
Box 102 Fax: [phone]
SE-433 22 Partille [email protected]
Sweden www.frico.se
For latest updated information and information
about your local contact: www.frico.se