Front Runner LADD007 User manual

LADD007_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS
front runner
LADD007
ENG
1
Thank you for purchasing a Front Runner Spare Wheel Step.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
Spare Wheel Step

LADD007_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS 2
TOOLS NEEDED
FIGURE 1.1
GET ORGANIZED
1
IN THE BOX
2
1
1 1 X Wheel Step
2 1 X 5m Ratchet Strap

LADD007_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE2
2.1
2.2
Feed the non - ratchet end of the Ratchet
Strap (Item 2) over and around the top pin
found at the back of the Wheel Step (Item 1)
as shown.
Repeat this on the bottom pin as shown in
2.1.
Place the step over the spare wheel and
thread the end of the strap through the
ratchet.
Once happy with the positioning of the
Wheel Step, tighten the strap using the
ratchet. Ensure that the strap and the Wheel
Step are tight enough to support your body
weight.
This product will only fit wheels
with a diameter of 600 - 880mm
(24 - 35 inches).
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!
Before fastening the strap, carefully
open and close the vehicle's rear doors
to ensure the Wheel Step does not
come in contact with the vehicle's body
causing possible damage.
If contact or interference occurs, refit
the Wheel Step to the opposite side of
the spare wheel.
2
1