Front Runner Wolfpack Pro RRAC257 User manual

RRAC257_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS
front runner
RRAC257
ENG
1
Thank you for purchasing a Front Runner Wolfpack Pro Mounting Bracket.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
WOLFPACK PRO MOUNTING BRACKETS

RRAC257_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS 2
TOOLS NEEDED
FIGURE 1.1
CHECK ONLINE FOR THE LATEST FITMENT GUIDE WWW.FRONTRUNNEROUTFITTERS.COM
Widthways
Lengthways
GET ORGANIZED
1
IN THE BOX
1 2 X Bottom Bracket
2 2 X Clamp Bracket
3 4 X M8 x 10 Button Head Bolt
4 4 X M8 Thin Nut
5mm
3
1
4
2
A B
Note : This Bracket works with both
SBOX031 (Low Lid) and SBOX062 (High
Lid).

B
A
RRAC257_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE2
2.1
2.2
2.3
Decide where on the rack you
want to fit your Wolf Pack Pro.
(Sold Separately SBOX31). Refer to FIG1.1
A- Lengthways
B- Widthways
Slide M8 thin nuts (Item 4) in the choosen
slats. Loosely fit the Bottom Brackets as
shown using, M8x10 Button Head Bolts &
M8 Thin Nuts (Items 3 & 4).
Place your Wolf Pack Pro onto the
rack between the Wolf Pack Pro catch
brackets.Move the brackets sugly against
the Wolf Pack Pro before fully tightening.
Secure the Wolf Pack Pro using the Clamp
Bracket (Item 2).
1
4
3
2
5mm

RRAC257_REV _A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS 4
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!