Front Runner RRAC203 User manual

RRAC203_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS
front runner
RRAC203
ENG
1
Thank you for purchasing a Front Runner Telescopic Camp Light Rack Bracket.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
TELESCOPIC CAMP LIGHT RACK BRACKET

RRAC203_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS 2
TOOLS NEEDED
FIGURE 1.1
CHECK ONLINE FOR THE LATEST FITMENT GUIDE WWW.FRONTRUNNEROUTFITTERS.COM
GET ORGANIZED
1
IN THE BOX
1 1 X Light Bracket
2 1 X Rack Support Bracket
3 1 X M8 x 25 Button Head Bolt
4 1 X M8 Nyloc Nut
5 1 X M8 Schnorr Washer
6 1 X M8 x 12 Button Head Bolt
7 1 X M8 Thin Nut
3mm
5mm
6
5
7
2
4
3
1

RRAC203_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE2
2.1
2.2
2.3
Choose where you would like to mount your
Light bracket. Remove the Corner from the
Rack and Slide the M8 Nyloc Nut (Item 4)
into the Side Profiles T-Slot.
Secure the Light Bracket and the Rack
Support Bracket (Item 1 & 2) to the Rack
using M8 x 25 Button Head Bolt, M8 Nyloc
Nut, M8 Schnorr Washer, M8 x 12 Button
Head Bolt and a M8 Thin Nut, inserted
via the slat pocket as indicated by (A)
(Items 3, 4, 5, 6 & 7).
Insert the handle of the Adjustable Rod
(Sold Seperately - LIGH218) into the Light
Bracket as shown.
3
2
1
6
5
7
3mm
5mm
A

RRAC203_REV _A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS 4
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!