FUFU & GAGA Cupboard User manual

Separate glides into 2 parts.
Fix slide rail 15 to board 5 and 6 with
screw(D) as shown.
Please pay attention to the holes where
the accessories are inserted.

Insert quickfit screw(A) into corresponding
holes in board 5 and 6 with screwdriver as
shown.
Please don't use an electric screwdriver or
use force to rotate, may cause crack.

Attach plank 14 and 30 to board 5 with
wooden dowel(E) and turn cam locks(B)
clockwise to tighten as shown.

Attach board 6 to the component with
wooden dowel(E) and turn cam locks(B)
clockwise to tighten as shown.

Insert quickfit screw(A) into corresponding
holes in board 5 and 4 with screwdriver as
shown.

Connect board 4 and 5 to board 3 with
wooden dowel(E) and turn cam locks(B)
clockwise to tighten as shown.
Connect board 4 and 5 with bar 29 using
screw(P) as shown.

Attach board 2 to board 4,5,6 with screw(C) as shown.

Insert quickfit screw(A) into corresponding
holes in board 1 as shown.

Cover board 1 to the assembled unit with
wooden dowel(E), and turn cam locks(B)
clockwise to tighten as shown.

Fix leg and leg support to board 2
with screw(D) as shown.

Fix back board 8 to the assembled
unit with screw(D) as shown.

Reinforce the back board with
part(N) and nail(J) as shown.

Insert quickfit screw(A) into board 27 at
first, attach board 20 and 21 to board 27
and turn cam locks(B) clockwise to tighten
as shown.

Insert quickfit screw(A) into board 19 at
first,attach board 19 to board 22 and turn
cam locks(B) clockwise to tighten as shown.
Attach board 19 to board 27 with screw(F)
as shown.

Insert quickfit screw(A) into corresponding
holes in board 25 and 26 with screwdriver
as shown.