FUFU & GAGA KF250022-03 User manual

Cabinet
9/12202/22/60:noisreV
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
2/9
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

3/9
A x 16
Ø6 x 34mm
F x 4
Ø35mm
B x 16
Ø15 x 12mm
Gx 2
Ø35mm
Cx 8
Ø8 x 30mm
H x 40
Ø4 x 16mm
Dx 16
Ø3 x 12mm
Jx 3
Ø20 x 23mm
Ex 2
28 x 14mm
K x 3
Ø4 x 20mm
When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

4/9
1
4
3
5
6
2
7
8
8
9
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

5/9
1
2
Ø6 x 34mm
A x 2
Ø15 x 12mm
B x 2
Ø6 x 34mm
A x 2
Ø15 x 12mm
B x 2
1
5
1
52
A
AB
B
B
B
A
A
B
180°
A
AB
180°
Fix quickfit screw A to panel 1 as shown.
Please note don't use an electric
screwdriver or use force to rotate,
may cause crack.
Attach panel 5 to panel 1, turn
cam locks B clockwise to tighten
as shown.
Attach panel 2 to panel 5, turn
cam locks B clockwise to tighten
as shown.
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

6/9
3
4
Ø6 x 34mm
A x 8
Ø15 x 12mm
B x 8
Ø8 x 30mm
C x 8
Ø6 x 34mm
A x 4
Ø15 x 12mm
B x 4
1
2
1
3
4
3
9
A
A
A
A
A
A
A
A
B
B
B
B
C
C
C
C
C
C
C
C
A
BA
A
A
B
B
B
180°
BC
A
180°
B
A
Insert wooden dowel C to the top and
bottom of panel 1&2 at first.
Cover panel 3 and 4 using screw A, turn
cam locks B clockwise to
tighten as shown.
Fix quickfit screw
A to panel 9 at
first,attach to
panel 1,turn cam
locks B clockwise
to tighten as
shown.
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

7/9
5
6
Ø35mm
F x 4
Ø4 x 16mm
Hx 8
Ø3 x 12mm
D x 16
28 x 14mm
E x 2
Ø4 x 16mm
Hx 4
F G
1
3
6
7
8
DD
D
D
D
D
D
D
D
D
D
D
D
D
D
D
HE
E
H
H
H
H
H
F
F
F
F
DE
Cover panel 6 to assembled
component, fix using screw D.
Fix Hinge F to panel 7 and 8
using screw H as shown.
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

8/9
7
8
FG
Ø4 x 16mm
Hx 8
Ø20 x 23mm
J x 1
Ø4 x 20mm
K x 1
Ø35mm
G x 2
Ø4 x 16mm
Hx 4
8
7
1
4
G
G
H
H
H
H
J
K
H
J
K
H
Fix Hinge G to another panel 8
using screw H as shown.
Attach panel 7 to panel 3 by
fixing Hinge F using screw
H. Fix handel J using
screw K.
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

9/9
9
Ø4 x 16mm
Hx 16
Ø20 x 23mm
J x 2
Ø4 x 20mm
K x 2
8
8
1
3
H
H
H
H
J
J
K
K
H
J
K
10
Attach panel 8 to panel 4 by fixing
Hinge F using screw H.Attach
another panel 8 to panel 5 by
fixing Hinge G using screw
H. Fix handel J using screw
K.
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA

WARRANTY CLAIMS
•There is a 30-day warranty for broken furniture or any other problems that do not
work properly. The warranty will start from the date of purchase which must be
verified by proof of purchase.
•Before making a claim, we may be able to answer your query, simply call us. Please
leave your purchase order number, along with some details of the problem, if you
want a replacement part. We will arrange within 48 hours. If there is out of stock,
we will reply with a shipping date.
•The product must be used in accordance with the instructions provided. For health
reasons.
•For other reasons, if the furniture needs to be returned, it must be cleaned and dried
and operated within 30 days of receipt.
Type of Warranty Claim
•Failure to follow the furniture instructions will invalidate the warranty. Attention please.
•Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
•Shall not bear any responsibility for misuse or user damage and / or loss of parts during
the installation of furniture.
•After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The
Following Areas
•Sheet parts: 1 month from the date of purchase.
•Electrical parts: 1 month from the date of purchase.
WARRANTY
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA
FUFU&GAGA