FUFU & GAGA KF200148 User manual

Nightstand
Version:09/14/2022 1/10

please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
2/10

When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
3/10
A x 8 B x 6
4 x 35 mm
C x 6 D x 10
6 x 35 mm
6 x 25 mm
3 x 12 mm 300 mm 300 mm 300 mm
300 mm
6 x 30 mm
15 x 9 mm 4 x 18 mm
E x 2
L x 8M x 1
F x 1 DR x 4 DL x 1 CL x 1
G x 8
CR x 1

4/10
1
2
3
4
5
6
7
7
8
9
10
11
12

11
5/10
6 x 35 mm
Bx6
4 x 18 mm
Ex2 F x 1
B
BE
FF
E
B
B
B
B
B
E
E
B
9
1
Insert quickfit screw(B) into No.1 and No.9
plate with a screwdriver as shown.
Fix handle(F) to No.9 plate with screw(E).

2
6/10
4 x 35 mm
A x 4
15 x 9 mm
Cx2
6 x 30 mm
D x 2
A
A
A
A
C
C
D
D
10
10
11
12
12
9
8
A
A
C
D
9
IIIIII
11
10
10
Connect No.10 and No.11 plate with
No.12 using screw(A) as shown.
Slide No.8 plate into available grooves,
and attach No.9 plate, turn cam lock(C)
clockwise to tighten as shown.
180°

3
7/10
300 mm 300 mm
4
3 x 12 mm
Gx4 CL x 1 CR x 1
3 x 12 mm
Gx4
300 mm 300 mm
DL x 1 DR x 1
G
DR
G
G
G
G
DR
DL
CL CR
G
G
G
G
23
CL G
Fix runner(DL) and (DR) to No.10 and
No.11 plate respectively with screw(G)
as shown.
Fix slide rail(CL) and (CR) to No.2 and No.3
plate respectively with screw(G) as shown.

5
8/10
15 x 9 mm
Cx4
6 x 30 mm
D x 4
D
D
C
C
C
C
CD
D
D
2
2
3
1
1
IIIIII
Connect No.2 and No.3 plate with No.1
using wooden dowel(D) and turn cam
lock(C) clockwise to tighten as shown.
180°

6
9/10
7
4 x 35 mm
A x 4
6 x 30 mm
D x 4
A
A
A
A
A
D
D
D
D
D
5
4
5
Slide No.4 plate into available grooves as shown.
Cover No.5 to No.2 and No.3 plate
with wooden dowel(D) and fix with
screw(A) as shown.

8
10/10
9
6 x 25 mm
L x 8 M x 1
L
M
L
L
L
L
L
L
L
L
5
6
7
7
7
Fix No.5 and No.6 plate to No.7 leg frame
with screw(L) as shown.
Align rails, slide the drawer.