Fujitsu Primergy CX270 S2 User manual

Operating Manual - English
PRIMERGY CX270 S2
Server Node
Operating Manual
Edition July 2013

Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected]su.com.
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2013 Fujitsu Technology Solutions GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.

CX270 S2 Operating Manual
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured to be used in commercial
and/or industrial areas as a server.
When used as visual display workplace, it must not be placed in the direct field
of view to avoid incommoding reflections (applies only to TX server systems).
The device has not been designed or manufactured for uses which demand an
extremely high level of safety and carry a direct and serious risk of life or body
if such safety cannot be assured.

Operating Manual CX270 S2
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for the Japanese market:
About SATA hard disk drives
The SATA version of this server supports hard disk drives with SATA / BC-SATA
storage interfaces. Please note that the usage and operation conditions differ
depending on the type of hard disk drive used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of hard disk drive:
http://jp.fujitsu.com/platform/server/primergy/harddisk/

CX270 S2 Operating Manual
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1 Concept and target groups for this manual . . . . . . . . . . 8
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 9
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 10
2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 11
2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2 Server node specification . . . . . . . . . . . . . . . . . . . 14
3 Installation steps, overview . . . . . . . . . . . . . . . . . . 19
4 Important information . . . . . . . . . . . . . . . . . . . . . 21
4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 21
4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 29
4.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 30
4.4 Transporting the server node . . . . . . . . . . . . . . . . . 31
4.5 Environmental protection . . . . . . . . . . . . . . . . . . . 31
5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 33
5.1 Unpacking the server node . . . . . . . . . . . . . . . . . . 34
5.2 Installing a server node to the server enclosure . . . . . . . 35
5.3 Connecting devices to the server node . . . . . . . . . . . . 37
5.4 Notes on connecting/disconnecting cables . . . . . . . . . 39

Operating Manual CX270 S2
Contents
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 41
6.1 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 41
6.1.1 Controls of the server node . . . . . . . . . . . . . . . . . . . . 41
6.1.1.1 Control elements . . . . . . . . . . . . . . . . . . . . . . . 42
6.1.1.2 Indicators on the control panel . . . . . . . . . . . . . . . . 42
6.1.1.3 LAN indicators . . . . . . . . . . . . . . . . . . . . . . . . . 43
6.2 Switching the server node on and off . . . . . . . . . . . . . 45
6.3 Configuring the server node . . . . . . . . . . . . . . . . . . 48
6.3.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 48
6.3.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 48
6.3.3 Operating system installation . . . . . . . . . . . . . . . . . . . 49
6.4 Cleaning the server node . . . . . . . . . . . . . . . . . . . . 50
7 Property and data protection . . . . . . . . . . . . . . . . . . 51
7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 51
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 53
8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 53
8.2 Server node switches itself off . . . . . . . . . . . . . . . . . 53
8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 54
8.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 54
8.5 No screen display or display drifts . . . . . . . . . . . . . . . 55
8.6 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 56
8.7 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 56
8.8 Error message on screen . . . . . . . . . . . . . . . . . . . . 56

CX270 S2 Operating Manual 7
1 Introduction
Two PRIMERGY CX270 S2 server nodes, each in a half-wide, 2U form-factor,
are embedded as a set into a single 2U PRIMERGY CX400 multi-node server
enclosure, thus providing an aggregated scale-out performance of a total of 4
CPUs of the Intel® Xeon® processor E5-2600v2 product family. The dual
socket server nodes combine high performance and attractive purchase costs
with high energy efficiency while coming without any local fans or power supply
units. With up to 16 high bandwidth memory modules for up to 1024 GB capacity
and two top-bin CPUs out of the Intel® Xeon® processor E5-2600v2 family,
CX270 S2 server nodes have a great versatility to match very ambitious server
profiles and workload scenarios. Two main usage scenarios are high
performance computing and virtual client computing, the latter utilizing e. g.
Citrix XenDesktop, VMware View Premier, or Microsoft Windows VDS as
enabling software bases.
Besides two onboard 1 GbE ports, three PCIe Gen3 I/O slots are provided, one
for an x16 GPGPU card and the other for two x8 low profile card. Diverse
interfaces from 1 to 10 Gb Ethernet, 10 Gb Fibre Channel over Ethernet, up to
56 Gb FDR Infiniband may be used with LP cards.
Access to local storage drives is granted by assignment of up to six HDDs or
SSDs that are physically located in the PRIMERGY CX400 server enclosure.
Four SATA drives can flexibly be accessed via onboard controller with software
RAID 0, 1 (six w/o RAID); more drives, SAS drives, or additional RAID 5, 50, 6
is realized via RAID card with cache and optional BBU. Local system boot for
VMware ESXi is possible via USB Flash Module.
The highly compact server node occupies two height units (HU) in the server
enclosure.

8 Operating Manual CX270 S2
Introduction
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server
node.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY CX270 S2 server node into
operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.

CX270 S2 Operating Manual 9
Introduction
1.2 Documentation overview
More information on your PRIMERGY CX270 S2 server node can be found in
the following documents:
– "Quick Start Hardware - PRIMERGY CX270 S2 Server Node"
– "Quick Start Software - Quick Installation Guide"
– "Safety Notes and Regulations" manual
"安全上のご注意 " for the Japanese market
– "Warranty" manual
"保証書 " for the Japanese market
– "Returning used devices" manual and "Service Desk" leaflet
"サポート＆サービス " for the Japanese market
– "PRIMERGY CX270 S2 Server Node Upgrade and Maintenance Manual"
Further information
The PRIMERGY CX270 S2 Server Node is a multi-node system. For
information on the server enclosure please refer to the following manuals:
– PRIMERGY CX400 S2 Server Enclosure Operating Manua
– PRIMERGY CX400 S2 Server Enclosure Upgrade and Maintenance
manual
IAll documentation on PRIMERGY hardware and ServerView software is
available online from the Fujitsu manuals server at:
–http://manuals.ts.fujitsu.com (global market)
–http://jp.fujitsu.com/platform/server/primergy/manual (Japanese market)
The complete PRIMERGY documentation set can also be downloaded
as a DVD ISO image at:
–ftp://ftp.ts.fujitsu.com/images/serverview/manuals (global market)
–http://jp.fujitsu.com/primergy/downloads (Japanese market)
IFor the Japanese market:
Before using the product, please check for additional information that
may be available under the following URL:
http://jp.fujitsu.com/platform/server/primergy/products/note/

10 Operating Manual CX270 S2
Introduction
Further sources of information:
– ServerView Suite Glossary
– Manual for the monitor
– Documentation for the boards and drives
– Operating system documentation
– Information files in your operating system
1.3 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.