Furniture Solutions 17DUM14M User manual

Imported by Furniture Solutions (Aust) Pty Ltd New South Wales, Australia.
For any assistance with assembly or for missing parts please contact:
Place of purchase or Furniture Solutions on below
Customer Service (Australia) Phone-1300 794 188
Email- [e-mail]
INSTRUCTION MANUAL
DUOMO COFFEE TABLE
ITEM CODE: 17DUM14M
117DUM14M
Imported by Furniture Solutions (Aust) Pty Ltd
10-16 Daisy St,
Revesby, NSW. 2212
www.furnituresolutions.com.au

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
217DUM14M
40
MINUTES
ALLOW TIME PEOPLE REQUIRED
X2

PARTS LIST
317DUM14M
Part Part Code
TABLE TOP
PCT1235TT
Leg x 4
PCT1235TL
A: x 1
ALLEN
KEY
5MM
B: x 16
SCREW
M8*20
C: x 16
SPRING
WASHER
M8
D: x 16
FLAT WASHER
Ø18*1.0*Ø8
HARDWARE LIST

STEP
1: FIT TABLE LEGS
Prepare product as per page 2:
Take table leg [2] aline holes with threaded holes in base of table top [1], note ensure table leg is
pointed as shown in diagram.
Next with bolt [B] together with spring washer [C] and washer [D] insert into hole thru to thread
in table top, by hand seat bolt correctly turn 2-3 times to ensure bolt has a good grip. Do not
tighten yet.
Repeat above for other 3 bolts. Once all seated correctly take ALLEN KEY [A] and tighten all 4
bolts until firm. Do not overtighten. Fit other 3 legs same way, Assembly Complete.
With the help of another person please lift product into air and rotate the table until feet can be
place on floor. Warning do roll table on to legs and rotate to feet as this may damages fittings.
Step 1 Diagram
FINISHED
417DUM14M

517DUM14M
CARE AND MAINTENANCE
About quarried marble or stone polished:
Quarried marble or stone contains natural fissures along with colour variations. These are not
considered as defects and are present in all quarried marble/stone products. Case in point it is
considered an enhancement of look and adds some uniqueness to the product. Warning as hard as stone
or marble is, the surface is still porous and might stain from liquids and food spills.
Care Instructions for polished marble or stone:
To reduce cleaning the use of table clothes and placemats is highly recommend.
Glass cleaner or soap and water may be used to maintain the marble or stone. Ensure to clean of any
residue of cleaning products.
Polished marble or stone protection optional:
To lessen the risk of staining from liquids and food spills. You may opt to coat table surface with a wax.
For best results use a polisher product that contains camauba wax.
This type of wax is readily available from your local home improvement store.
Warning your care instructions would alter when wax is used, please follow instructions on wax product
container or recommendations from your local home improvement specialist.
Repair advice:
Repairing of marble or stone requires a specialist in the field. So if you have scratched or chipped your
product please consult a local stone mason for advice/help to repair.

617DUM14M
SAFETY WARNINGS AND ADVICE
Notices and Advice
Please be advised that materials used in your furniture are not impervious to neglect, acts of
god, abuse, alcohol spills, improper use of chemicals such as bleach or any solvent based
products.
Please be advised that heat sources such as direct sunlight, log fires, heaters and air
conditioners can have adverse affects on your furniture.
Please be advised that fitting, bolts, nuts and or screws should be checked periodically to
ensure they have not loosened over time. Remember do not overtighten.
Please be advised that products are limited in design for residential use only and are not
suitable for commercial use.
DO NOT
•place in direct sunlight.
•place in close proximity to open flame or heaters.
•place in direct line of air conditioning ducting.
Safety warnings
DO NOT:
•drop, drag or strike table surface
•sit or stand upon the table surfaces
•place heavy objects on table top
•place very hot or cold items on the table surface unless adequately thick table mats are
used to prevent such items coming in contact with the surface
•scratch the surface or using as a chopping surface
•allow children to play under tables
•Never drag table always move by lifting
•Clean only as per instructions on previous page. Do not use washing powders or any
other substances containing abrasives that may potentially scratch the surface
Chairs and Stools
Do not:
•use chair/stool as a ladder
•climb on the chair/stool
•stand on the foot-rest of the chair, as this could lead to the stool becoming unbalanced
and overturning
•drag chair always lift to move

717DUM14M
WARRANTY DETAIL
1 Year Warranty
A one (1) year warranty applies to product against any defect associated with faulty
workmanship for a period of (1) year from date of purchase.
Furniture Solutions accepts no responsibility for defects caused by incorrect assembly,
mishandling, acts of god, general wear & tear, stains from spills/vegetation,
chipping/scratching, exposure to extreme heat/cold, mould/mildew, hardware corrosion,
misuse of the products & defects caused by failure in duty of care for the product in
accordance with the care instructions. Warranty only extends to original purchaser and is
not transferable, except when given as a gift.
Notice:
While every effort is made to use quality materials our products are limited in design for
domestic use only & are not suitable for commercial use.
Care should be taken not to place product near heat sources.
Duty of care:
While every attempt is made to supply product using quality components there is always a
need from consumer to help ensure long life of use for product. Instruction manuals are
designed with the nature of materials used in construction of the product.
*Proper use of item only what it is designed to do
*Regular maintenance and cleaning
In areas of high content of salt air, pollution & moisture require more frequent cleaning.
Claim management:
To make a warranty claim, customers can either contact the retailer where the purchase was
made or Furniture Solutions on contact details below. Proof of purchase will be required
before proceeding with any claim. In the case of product defects providing photos may be
able to speed up processing of the claim. If missing parts please refer to assembly
instructions for identification of said part and contact either of the above.
“Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure”.