Furniture Solutions ARCADIA 17ARCL4SW User manual

INSTRUCTION MANUAL
PRODUCT: ARCADIA 5PC LOUNGE
ITEM CODE: 17ARCL4SW
MADE IN CHINA
Furniture Solutions (Aust) Pty Ltd
10-16 Daisy St,
Revesby, NSW. 2212
www.furnituresolutions.com.au
ARCADIA 5PC LOUNGE
Please retain these pages as they contain ps to maximize the lifeme of your furniture with a measured eort.
Properly caring for your furniture can help ensure that it looks great year aer year.
Important Noce: While every eort is made to use quality materials our products are limited in design for domesc use only
& are not suitable for commercial use.

PRE ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that
may damage the product
2. Take care when liing. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly
5. Keep all hardware parts and packaging out of reach of small children
6. Do not over ghten the screws and bolts as this may damage the threads
90
MINUTES
ALLOW TIME PEOPLE REQUIRED
X2
For any assistance with assembly or missing parts please contact:
Place of purchase or Furniture Soluons on below
Customer Service (Australia) Phone– 1300794 188
Email– customerservice@furnituresoluons.com.au

A: x 2
Left Hand Arm
A: x 1
Left Hand Arm
B: x 2
Right Hand Arm
B: x 1
Right Hand Arm
C: x 2
Back rest
C: x 1
Back Rest
D: x 2
Seat
D: x 1
Seat
E: x 22
Washer
E: x 11
Washer
F: x 16
Bolt Medium
M6-30mm
F: x 8
Bolt Medium
M6-30mm
G: x 6
Bolt Large
M6-40mm
G: x 3
Bolt Large
M6-40mm
H: x 22
Bolt Cover
H: x 11
Bolt Cover
I: x 2
Tool 4mm
I: x 1
Tool 4mm
J: x 2
Back Rest Cush-
ion
590*400*70mm
J: x 2
Back Rest Cush-
ion
590*400*70mm
K: x 2
Seat Cushion
590*620*70mm
K: x 1
Seat Cushion
1180*620*70mm
Component & Parts List Armchair x 2 Component & Parts List 2 Seat Sofa

Coffee Table Parts List Side Table Parts list
A: x 1
Table Rim
A: x 1
Table Rim
B: x 2
Leg
B: x 2
Leg
C: x 1
Glass Panel
C: x 1
Glass Panel
D: x 8
Bolt Small
M6-15mm
D: x 8
Bolt Small
M6-15mm
E: x 8
Washer
M6
E: x 8
Washer
M6
F: x 8
Bolt Cover
F: x 8
Bolt Cover
G: x 1
Tool
4mm
G: x 1
Tool
4mm

Assembly for Arcadia 5Pce Lounge.
First of all preparation is paramount before you start to assemble.
The arms for sofa’s are the same for armchair & 2 seater’s but there is a left &
right arm. Suggest you identify which is which and stack separately. To tell the
difference note that there is a thread hole on back of arm on inside, that hole
indicates which is which, holes face inwards.
Next bolts are the same for Chairs but different for Coffee & Side Table,
please sort these into 3 piles small, medium & large. Note Medium & Large
are for use on sofa’s, small for use on Coffee & Side Table.
Assembly Instructions –Coffee & Side Tables
Note instruction are them same only 2 pieces are different size, Table Rim &
Glass Panel. Take leg [B] refer to diagram for bracket protruding from side of
leg with threaded hole, with the help of another person hold leg upside
down and add table rim [A] by sliding into tube ensure you correct side up
you should see thru table rim holes into threaded hole of bracket on leg.
Then take small bolt [D] with washer [E] insert into hole ensure that bolt is
seated correctly by hand turn 2-3 times so bolt has gripped correctly. Do not
tighten yet. Repeat for other 3 bolts. Again do not tighten yet. Add second
leg in same fashion. Now with the help of a second person turn over product
so it is on its feet. We do this to square up frame before you tightening bolts.
Have second person hold so product appears to be square then take tool [G]
and tighten bolts till feel firm. Do not overtighten as you may damage
threads. Then take bolt cover [F] and press onto all bolts. Next place Glass
Panel [C] on squarely ready to go.