Furniture Solutions Kuba Cot II KUCO User manual

1
Kuba Cot II (drop side)
Assembly Instructions – Please keep for future reference
KUCO
Dimensions
No. people
Assembly Time
OW #
Length: 124 cm
45 mins
(approx.)
KUCO
Width: 58 cm
Height: 92 cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0161 480 6204 or email [e-mail]

2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
•Check you have all the
components and tools listed
on pages 4.
•Remove all fittings from the
plastic bags and separate
them into their groups.
•Keep children and animals
away from the work area,
small parts could choke if
swallowed.
•Make sure you have enough
space to lay out the parts
before starting.
•Do not stand or put weight on
the product, this could cause
damage.
•Assemble the item as close to
its final position (in the same
room) as possible.
•Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
•We do not recommend the
use of power
drill/drivers for
inserting
screws, as this
could damage
the unit. Only use hand
screwdrivers.
•Dispose of all packaging
carefully and responsibly.
Care and Maintenance
•Only clean using a damp cloth and
mild detergent, do not use bleach
or abrasive cleaners.
•From time to time check that there
are no loose screws on this unit.
•This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
This product is designed and manufactured by Drewex®.
For further information please visit http://www.drewex.com/en/
If you have damaged or missing components, email [e-mail]
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.

3
Exploded View
If you have damaged or missing components
email [email protected]

4
Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No
Description
Qty
Size
(mm)
Thickness
(mm)
A
Foot board
1
920 x 580
20 mm
B
Head board
1
920 x 580
20 mm
C
Side Rail
1
1200 x 630
20 mm
D
Drop side Rail
1
1200 x 630
20 mm
E
Mattress Platform
1
1195 x 575
37 mm
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
(a)
Joint connector bolt
60mm
4 pcs
(b)
Cross Dowel nut
15mm
4 pcs
(c)
Joint connector bolt
50mm
6 pcs
(d)
Joint connector
bolt (for anchor)
40mm
4 pcs
(e)
Washers
4 pcs
(f)
Anchor Bolt
50mm
4 pcs
(g)
Allen Key
1 pcs
(h)
Drop side rail bars
2 pcs
(i)
Drop side clip
2 pcs
(j)
Rod anchor top
2 pcs
(k)
Rod anchor bottom
2 pcs
(l)
Rod anchor
middle
2 pcs
Tools Required
Ruler – Use this to measure your screws (mm)
If you have damaged or missing components
email [email protected]

5
Assembly Instructions
If you have damaged or missing components
email [email protected]
Step 2
Step 1

6
Assembly Instructions
If you have damaged or missing components
email [email protected]
Step 4
Step 3

7
Assembly Instructions
If you have damaged or missing components
email [email protected]
Step 6
Step 5

8
Assembly Instructions
If you have damaged or missing components
email [email protected]
Step 8
If height adjustment is
required follow steps
7 + 8 in reverse
Step 7

9
Drop Side Lock Function
If you have damaged or missing components
email [email protected]