GE Invenia ABUS 2.0 User manual

Technical Publication
4700-0043-00
Rev. 4
InveniaTM ABUS 2.0
System Setup and Basic Service Manual
Operating Documentation
Copyright © 2018-2019 by General Electric Company Inc. All Rights Reserved.

Product Information
(CE0197).
This manual is a reference for the Invenia ABUS 2.0.
It applies to Version 2.0 software or later.

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-1
4700-0043-00 Rev. 4
Change history
Revision History
List of Effected Pages (LOEP)
Please verify that you are using the latest revision of this document. Information
pertaining to this document is maintained in the Engineering Central portion in
MyWorkshop. If you need to know the latest revision, contact your distributor,
local GE Sales Representative or in the USA call the GE Ultrasound Clinical Answer
Center at 1 800 682 5327 or 1 262 524 5698.
Revision
Date
(YYYY-MM-DD) Reason for change
Rev. 1 2018-07-19 Initial release
Rev. 2 2019-01-04 Update package information and unpacking procedure
Rev. 3 2019-01-18 Update revision number
Rev. 4 2019-04-07 Update device label information
Pages Revision Pages Revision
Front Rev. 4 Chapter 6 Rev. 4
Front matter Rev. 4 Chapter 7 Rev. 4
TOC Rev. 4 Chapter 8 Rev. 4
Chapter 1 Rev. 4 Chapter 9 Rev. 4
Chapter 2 Rev. 4 Chapter 10 Rev. 4
Chapter 3 Rev. 4 Index Rev. 4
Chapter 4 Rev. 4 Rear Cover Rev. 4
Chapter 5 Rev. 4

i-2 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Important precautions
Translation policy

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-3
4700-0043-00 Rev. 4

i-4 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-5
4700-0043-00 Rev. 4

i-6 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-7
4700-0043-00 Rev. 4

i-8 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-9
4700-0043-00 Rev. 4

i-10 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-11
4700-0043-00 Rev. 4

i-12 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-13
4700-0043-00 Rev. 4

i-14 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-15
4700-0043-00 Rev. 4
Damage in transportation
All packages should be closely examined at time of delivery. If
damage is apparent, write “Damage In Shipment” on ALL copies
of the freight or express bill BEFORE delivery is accepted or
“signed for” by a GE representative or hospital receiving agent.
Whether noted or concealed, damage MUST be reported to the
carrier immediately upon discovery, or in any event, within 14
days after receipt, and the contents and containers held for
inspection by the carrier. A transportation company will not pay a
claim for damage if an inspection is not requested within this 14
day period.
Certified electrical contractor statement - For USA Only
All electrical Installations that are preliminary to positioning of
the equipment at the site prepared for the equipment shall be
performed by licensed electrical contractors. Other connections
between pieces of electrical equipment, calibrations and testing
shall be performed by qualified personnel. In performing all
electrical work on these products, GE will use its own specially
trained field engineers. All of GE’s electrical work on these
products will comply with the requirements of the applicable
electrical codes.
The purchaser of GE equipment shall only utilize qualified
personnel (i.e., GE’s field engineers, personnel of third-party
service companies with equivalent training, or licensed
electricians) to perform electrical servicing on the equipment.

i-16 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Omission and errors
If there are any omissions, errors or suggestions for improving
this documentation, please contact the GE Global Ultrasound
Documentation Group with specific information listing the
system type, manual title, part number, revision number, page
number and suggestion details.
Mail the
information to:
GE Medical Systems Ultrasound and Primary Care Diagnostics, LLC
9900 Innovation Drive
Wauwatosa, WI 53226
GE employees should use Post-market Quality Management
(PQM) to report service documentation issues.
These issues will then be in the internal problem reporting tool
and communicated to the writer.

Invenia ABUS 2.0 – System Setup and Basic Service Manual i-17
4700-0043-00 Rev. 4
Service Safety Considerations
For a complete review of all safety requirements, refer to
Chapter 1 in the Service Manual.
DANGER
DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH,
ARE PRESENT IN THIS EQUIPMENT. USE EXTREME
CAUTION WHEN HANDLING, TESTING AND ADJUSTING.
WARNING
Use all Personal Protection Equipment (PPE) such as gloves,
safety shoes, safety glasses, and kneeling pad, to reduce the
risk of injury.

i-18 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Legal notes
The contents of this publication may not be copied or duplicated
in any form, in whole or in part, without prior written permission.
GE may revise this publication from time to time without written
notice.
Trademarks
All products and their name brands are trademarks of their
respective holders.
Copyrights
All Material Copyright © 2018-2019 by
General Electric Company Inc. All Rights Reserved.