GE Vivid iq User manual

August 2016
Global CVUS Development team
1
Quick Guide of Gestures on
Vivid™iq
JB42541XX

Layout
Control Menu
Side Menu
Shortcut Menu
Image Area
Title Bar Tray Menu
Clipboard

Gesture
Flick:
Quickly brush the touch monitor with your fingertip.
Slide:
Move fingertip over surface without losing contact.

Overview –Functions supported by
gestures
User Interface interaction
•Gain / Depth
•ROI Position
•ROI Size
•Zoom (double tap / pinch / spread)
•Cursor Line
•Image Review
•Base Line / Horizontal Sweep / Scale
•4D rotate (Live & Recall)
•2 Click crop
•Multislice
•Flexislice
Imaging control
•Control Menu
•Side Menu
•TGC
•Clipboard
•List scroll (patient / exam list)
•Shortcut menu configuration

User Interface interaction by Gestures

Control Menu –Page Switch
Gesture Notes (this example shows 2D mode menu):
1. Slide or flick finger from RIGHT to LEFT in active area will toggle
to next page.
2. Back to previously page: slide or flick finger from LEFT to RIGHT.
Page indicator Active area
Page 1
Page 2

Control Menu –Parameter value
selection
Gesture: Notes (this example shows 2D mode menu):
1. Each single value can be selected by Tap gesture.
2. The parameter value can also be selected by sliding the finger
on the active area until the desired value is reached.
Valid area
Active area
Or

Side Menu
Gesture:
Notes:
1. To toggle to next page in side menu, flick (swipe) your finger
from bottom to top in active area.
2. To go back to previous page, flick (swipe) your finger from top
to bottom.
Valid area

TGC
Gesture: Notes:
1. Slide your finger from top to bottom (or bottom to top) drawing
your desired TGC curve.
2. It is also possible to change individual sliders position by sliding
each of them left to right (or right to left).
Valid area

Clipboard
Gesture:
Notes:
1. Slide your finger from bottom to top (or top to bottom) to scroll
through the exam images.
2. You can also swipe on the clipboard (flick gesture) to perform
the same operation.
3. Or you can use the arrows below the clipboard to move to
previous/next image.

List control –Patient / Exam Lists
Gesture:
Notes:
1. Flick or swipe your finger from bottom to top
(or top to bottom) to display your desired page
in patient or exam list.
Active area

Shortcut Menu Configuration
Scenario 1 Scenario 2
Notes:
1. Any shortcut icon can be moved to an empty position by dragging gesture - scenario 1.
2. It is also possible to swap two icons by dragging gesture (as described in next slide) –
scenario 2.

Shortcut Menu Configuration: swapping
Gesture: Notes:
1. To reset the position of all icons to default values, press Config
- go to "Admin" tab - press "Restore" and select "System
configuration“ – be aware that this will reset whole system
configuration .
Step1:
Long press on one of the icons you want to swap.
Step2:
Drag this icon to your desired position.
Step3:
Drop this icon in your desired position –icons will be swapped.

Imaging control by gestures

Gain
increase
decrease
Gesture:
increase
decrease
Notes:
1. Gain can be modified on the Gain bar in the control menu on the bottom
part of the screen - swiping your finger from left to right will increase gain.
2. Gain can also be modified using the gray bar on the upper right side of the
screen –swiping your finger from bottom to top will increase the gain
value.
Gain operation areas

Depth
Notes:
1. Depth can be changed using the “Depth” control on the Control menu (bottom
part of the touch screen).
2. Or it can be modified on the left side of the image –as described
in next slide.
Option 1
Option 2

Depth
Gesture: Notes:
1. To modify Depth directly on the depth scale, flick (swipe) your finger on the depth scale on
the left side of the image –by default, swiping your finger from top to bottom will increase
depth.
2. If you wish to change the direction how depth is controlled (swiping your finger from
bottom to top will increase depth) go to Configuration –open “Imaging” tab – go to
“Global” tab and “Gesture” and click “Invert depth control”.

Color ROI size
Notes:
1. The four vertices of the ROI can be manipulated to change ROI width and length.

Color ROI Size
Step2: Release
Step1: Drag
Gesture:

Color ROI position
Gesture:
Step1: Click on
the image area
Step2: move ROI to
a new position