Genaray Powerhouse User manual

USER MANUAL
Powerhouse
330-WATT DAYLIGHT LED MONOLIGHT

2Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
Thank you for choosing Genaray
The Genaray 330-watt Powerhouse Monolight features
an advanced Chip-On-Board (COB) array that outputs a
brilliant 63,000 lux for a powerful constant light source
that will deliver plenty of power, even when used with
a softbox. This compact LED array eliminates multiple
shadows that are common in LED lighting. Flicker-free
light and quiet cooling fans that are almost inaudible
make the Powerhouse as great a choice for film and video
as it is for photo shoots. The fixture’s natural-looking
5600 K daylight-balance light is dimmable from 100% to
0% to deliver the exact brightness your subject needs.
The Powerhouse boasts a CRI and TLCI of over 95 for
extremely accurate color rendering. The integrated
Bowens mount enhances the performance of the
Powerhouse by offering compatibility with many light-
shaping accessories. A 2.4 GHz receiver is integrated
into the unit for wireless operation of one or more
Powerhouse fixtures with a dedicated remote control.
Powerhouse
INTRODUCTION

Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL 3
· Please read and follow these
instructions, and keep this
manual in a safe place.
· Keep this unit away from water and
any flammable gases or liquids.
· Make sure the unit is powered off
when plugging it into a power source.
· Use only the correct,
recommended voltage.
· Handle the unit with care.
· Do not attempt to disassemble or
repair the equipment—doing so will
void the warranty, and Genaray will
not be responsible for any damage.
· Do not stare directly at the lights
when they are powered on.
· Clean the unit with only
a soft, dry cloth.
· Images are for illustrative
purposes only.
PRECAUTIONS
Precautions

4Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
PRODUCT
OVERVIEW
Power switch
Channel
button
Channel
indicator light
Adjustment knob
Group button
Group
indicator light
Power socket
LCD screen
Tilt locking
knob

Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL 5
Product overview
Reflector
Reflector
release button
Yoke
Umbrella mount
and locking knob
5/8 in. receiver
Locking knob
Handle
Umbrella
pass-through

6Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
PRODUCT
OVERVIEW
Power
Button
Group buttons
(for brightness
adjustment only)
Color temperature
buttons (for bicolor
lights only)
Channel
select button
Audio alert/mute
selector (flash mode only)
Up button
Down button / Mode selector
(for flash systems only)
Lock switch
Mounting
foot
USB port

Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL 7
CONTENTS
INCLUDE
· Powerhouse 330-Watt LED Monolight
· Reflector
· Power supply
· Power cord
· Hanging strap
· Yoke
· Remote
· User manual
contents
Power
cable
Power supply
switch
Hanging
strap

8Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
The Powerhouse is powered
directly from an AC outlet.
Important! The Powerhouse is a multivoltage
fixture capable of running on 100–240 V, 50/60 Hz.
The included cable has a 120 V, 50 Hz plug. To
use this fixture with other voltages, you must
use a plug adapter (sold separately).
Connect the AC power adapter to
the Powerhouse with the 5-pin XLR
cable, and use the power cable to
connect the adapter to an outlet.
Warning
The Powerhouse is a very powerful
light. Do not look directly into the
light while it’s being switched on.
Turn on the power supply switch. Then
turn on the power switch on the fixture.
To move the power supply safely out of
the way, use the hanging strap to hang
the power supply on the light stand.
MOUNTING THE
POWERHOUSE
POWERING THE
POWERHOUSE
Mount the Powerhouse on any heavy-
duty light stand with a 5/8-inch baby-pin,
and turn the locking knob until secure.
instuctions

Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL 9
OPERATING THE
POWERHOUSE
Attaching the Reflector
The Powerhouse includes a 7-inch reflector,
but it’s compatible with Bowens-mount
accessories. To attach the reflector:
Insert the three mounting studs into the
notches on the fixture. Turn the reflector
clockwise until it clicks into place.
To remove the reflector, push and
hold the release button, and rotate
the reflector counterclockwise.
instructions

10 Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
Attaching an Umbrella
When you attach the reflector, make
sure the umbrella pass-through is on
the same side as the umbrella mount.
Insert the shaft of the umbrella through
the umbrella pass-through, and then
through the umbrella mount. Tighten
the locking knob until secure.
Other brands’ Bowens-style
reflectors will work with the
Powerhouse. Make sure the
reflector has a pass-through hole
in order to use it with an umbrella.
Note
instructions

Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL 11
Adjusting the Brightness
The Adjustment Knob controls
the brightness from 100% to
0% in 10% increments.
Setting the Channel and Group
The Powerhouse and remote must
be set to the same channel and group
for wireless remote operation.
Channel Selection
Press the CHANNEL button on the
Powerhouse. While the channel
indicator light is on, use the adjustment
knob to select channel 1 to 16.
Group Selection
Press the GROUP button. While the group
indicator light is on, use the adjustment
knob to select group A, B, C, D, or E.
instructions

12 Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
REMOTE
OPERATION
The Powerhouse’s brightness can be
controlled by the included 2.4 GHz wireless
remote. The integrated receiver has 16
channels and five groups, so you can
control several Powerhouse fixtures with
a single remote from up to 300 feet away.
Powering On the Remote
Press and hold the power button
until the screen illuminates.
Mode Selection
Important! The PH300-LED will operate with
the remote only when LED mode is selected.
The remote defaults to LED
mode when it's powered on.
Flash mode is not functional
with the PH300-LED light.
Note If the screen shows FLASH, the remote
is in Flash mode. Press and hold the
mode selector to switch to LED mode.
instructions

Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL 13
Setting the Channel
The remote and Powerhouse must
be set to the same channel and group
for wireless remote operation.
Channel Selection
Press the channel button to highlight the
channel number, and use the up/down
buttons to select the desired channel.
Group Selection
Select a group by pressing the appropriate
group button. To select group E, press and
hold the group D button. In LED, mode
the brightness level will be highlighted.
Adjusting Brightness
Press the group button to highlight
the brightness level of the group
you want to adjust. Use the up/down
buttons to adjust the brightness.
All Powerhouse lights that are set
to the same channel and group will
be adjusted to the same brightness
level. To adjust the brightness
of each light individually, assign
each light to a different group.
Note
instructions

14 Powerhouse 330-Watt Daylight LED Monolight - USER MANUAL
PRODUCT
SPECIFICATIONS
LED chip type: COB
Color temperature: 5600 K ±200 K
Luminance: 63,000 lx @ 3 ft.
Coverage: 120°
CRI: ≥95
TLCI: ≥95
Output power: 330 W
Working voltage: 100 to 240 V AC, 50/60 Hz
Mount: 5/8 in.
Channels and groups: 16 channels, 5 groups
(A, B, C, D, E)
Dimensions: 16 × 9 × 9 in.
(40.4 × 22.9 × 22.9 cm)
with yoke and handle
Weight: 7.75 lb. (3.5 kg)
sPecifications

ONE-YEAR LIMITED WARRANTY
This Genaray product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date
or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of
any product that fails during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by Genaray. If the product
has been discontinued, Genaray reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, GENARAY MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty provides you with specific legal rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Genaray Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Genaray along with
the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own
risk and expense.
For more information, or to arrange service, visit www.genaray.com or contact us at [e-mail].
© 2018 Genaray. All Rights Reserved.

GG2