Genaray Square 60 User manual

USER MANUAL
Square 60 / Twin 120
BI-COLOR LED PANELS
SQ-60 / TW-120

Square / Twin Bi-Color LED Panels - USER MANUAL
2
THANK YOU FOR CHOOSING GENARAY
The Genaray Square 60 and Twin 120 Bi-Color LED Panels
are bright, soft, and portable lighting tools for photographers
and videographers. Change the color temperature and
brightness from 2700 to 6500 K for warm to cool tones, and
0% to 100% for dim to brightly lit photos. The built-in diffuser
softens and spreads the light output while the barndoors allow
additional light shaping. 11 effects provide creative tools for
scene lighting, like mimicking a lightning storm or a group of
paparazzi.
Power the light on location or in the studio with a V-mount
battery (not included) or plug it directly into a wall outlet.
Change settings on the fly with the light hooked up to a DMX
board for hands-on control.
Square 60 / Twin 120
INTRODUCTION

Square / Twin Bi-Color LED Panels - USER MANUAL 3
· Please read and follow these
instructions, and keep this manual in a
safe place.
· Keep this unit away from water and any
flammable gases or liquids.
· Make sure the unit is powered off when
plugging it into a power source.
· Use only the correct, recommended
voltage.
· Do not use 26-volt V-mount batteries
with this fixture. Doing so will damage
the unit and void the warranty.
· Do not attempt to disassemble or repair
the equipment—doing so may expose
you to electric shock and will void the
warranty. Genaray will not be responsible
for any damage.
· Handle the unit with care.
· Do not stare directly at the lights when
they are powered on.
· Keep this product away from children.
· Clean the unit with only a soft, dry cloth.
· Images are for illustrative purposes only.
PRECAUTIONS
Precautions

Square / Twin Bi-Color LED Panels - USER MANUAL
4
PRODUCT
OVERVIEW
Light Fixture - Front
5/8 in. receiver
Barndoors
Locking tabs
LED array/
Soft panel
Yoke
Mount locking knob

Square / Twin Bi-Color LED Panels - USER MANUAL 5
Product overview
Light Fixture - Back
D-tap output
power socket
V-mount
battery plate
V-mount
release button
5-pin DMX
output socket
5-pin DMX
input socket
4-pin XLR
power socket
Tilt adjustment
knob
Selector switch
Power switch
Setting buttons
LCD

Square / Twin Bi-Color LED Panels - USER MANUAL
6
MOUNTING THE LED PANELCONTENTS INCLUDE
· LED panel with yoke
· V-mount AC adapter with 4-pin XLR
connector
· Power cord
· Barndoors
Mount the light on a heavy-duty light stand
with a 5/8-inch baby pin, and turn the
locking knob until secure.
Remove the locking knob to mount the light
into a 11⁄4-inch junior receiver.
contents

Square / Twin Bi-Color LED Panels - USER MANUAL 7
POWERING THE
LED PANEL
The light can be powered directly from
an AC outlet or by a V-mount battery (not
included).
AC POWER
Important
The light is a variable-voltage fixture
capable of running on 100–240 V, 50/60
Hz. The included cable has a 120 V, 50
Hz (North American) plug. To use this
fixture with other voltages, you must
use a plug adapter (sold separately).
Slide the V-mount AC power adapter into
the V-mount plate until it clicks. Connect the
4-pin XLR connector to the 4-pin XLR power
socket, and plug the power cable into the AC
adapter and an outlet.
To remove the AC adapter, press the
V-mount release button, and slide the
adapter out of the mount.
instructions

Square / Twin Bi-Color LED Panels - USER MANUAL
8
BATTERY POWER
The light can be powered by a V-mount
battery.
When attaching the battery, make sure the
power switch is in the Off position, and the
fixture is not plugged into a wall outlet.
Slide the V-mount battery into the V-mount
plate until it clicks.
To remove the AC adapter, press the
V-mount release button, and slide the
adapter out of the mount.
Note
You can connect a Gold mount-style
battery to the light with a D-tap
power cable (not included).
USER INTERFACE
Open the barndoors and turn on the light.
The LCD will show the last setting that was
used.
instructions
Setting Buttons
Selector Switch

Square / Twin Bi-Color LED Panels - USER MANUAL 9
INT/CCT  INTENSITY
AND COLOR TEMPERATURE
INT: Adjusts the brightness intensity from
0% (off) to 100%.
CCT: Adjusts the color temperature from
2700 to 6500 K in 100 K increments.
SETTING BUTTONS
Press one of the setting buttons to enter the
setting.
SELECTOR SWITCH
Rotate the selector switch to adjust the
value of the highlighted setting.
Press the selector switch to toggle the
highlighted setting. This is necessary only if
there are multiple settings on a page.
SETTINGS
instructions
INT
INT: 29%
CCT:2700K

Square / Twin Bi-Color LED Panels - USER MANUAL
10
FX  LIGHTING EFFECTS
Mode: Selects the lighting effects mode
from 1 to 11.
Int: Adjusts the lighting effect’s brightness
intensity from 0% (off) to 100%.
CCT: Adjusts the color temperature from
2700 to 6500 K in 100 K increments.
SPEED: Adjusts the speed of the lighting
effect from 0% to 100%.
EFFECTS
Lightning: Simulates lightning with short
bursts of light.
Fireworks: Simulates the effect of fireworks
with pulses of color and white light.
Flash: Constant flashing light.
Breath: Light fades in and out like breathing.
Cop Car: Simulates emergency flashing
lights.
SOS: Flashes Morse code SOS distress
signal.
instructions
FX
INT: 10%
CCT:2700K
SPEED: 1%
MODE:Lightning
1/11

Square / Twin Bi-Color LED Panels - USER MANUAL 11
LANG.  DISPLAYED LANGUAGE
Language: Selects the on-screen display
language. Choose English or Chinese.
Fault Light: Simulates a faulty light with
inconsistent flickering.
Turn Signal: Simulates the blinking turn
signal of a car.
Tracing: Outputs one flash followed by two
quick flashes.
Screen: Simulates the changing brightness
of a TV screen.
H&L Beam: Outputs alternating high- and
low intensity flashes.
instructions
Language
Language:English
Ver1.2

Square / Twin Bi-Color LED Panels - USER MANUAL
12
2.4G  REMOTE CHANNEL
Addr: Adjusts the wireless remote channel
from 1 to 12, and RMT_OFF (remote off).
Note
This feature is not yet available and
will be released in a future update.
DMX  DMX CHANNEL
Addr: Changes the DMX channel from 01
to 512.
instructions
DMX
Addr.:238
APP/2.4G
Addr.: 1

Square / Twin Bi-Color LED Panels - USER MANUAL 13
REMOVING THE
BARNDOORS
The barndoors come attached. To remove
them, press down on the frame’s top two
corners until the barndoor is free from the
locking tabs, and remove.
The light supports DMX-512 so the light’s
settings can be remotely controlled from a
DMX lighting control console.
Important!
Make sure the DMX address on the
light matches the DMX console.
To setup DMX operation on the light, follow
these steps:
1. Use a 5-pin XLR cable to connect a DMX
controller to the light's DMX input socket.
2. Press the DMX button to activate DMX
mode.
3. Turn the selector switch to select a DMX
address.
USING DMX
instructions

Square / Twin Bi-Color LED Panels - USER MANUAL
14
PRODUCT
SPECIFICATIONS
SQ60
LED count: 896
Color temperature: 2700 (±150) to 6500 K (±300 K)
Luminance: 2670 lx @ 3 ft.
2230.5 lx @ 1 m
Coverage: 120°
CRI: 94.2
TLCI: 98
Output power: 60 W
Effects: 11
Working voltage: AC: 100–240 V
DC: 15 V
Battery type: V-mount (14.8 V max)
Mount:
5/8 in. baby pin, convertible to 11⁄4in. junior pin
Power supply output: 15V⎓4.8A; 72 W
Cable length: 12.8 ft. (3.9 m)
Dimensions (H × W × D):
Light: 13.1 × 11.9 × 2.6 in. (33.4 × 30.3 × 6.6 cm)
With yoke: 16.2 × 14.1 × 2.6 in. (41.3 × 36 × 6.6 cm)
Weight: 7.8 lb. (3.5 kg)
(with barndoors and yoke, without batteries)
sPecifications

Square / Twin Bi-Color LED Panels - USER MANUAL 15
TW120
LED count: 1792
Color temperature: 2700 (±150) to 6500 K (±300 K)
Luminance: 5270 lx @ 3 ft.
4402.5 lx @ 1 m
Coverage: 120°
CRI: 94.2
TLCI: 98
Output power: 120 W
Working voltage: AC: 100–240 V
DC: 15 V
Battery type: V-mount (14.8 V max)
Mount:
5/8 in. baby pin, convertible to 11⁄4in. junior pin
Power supply output: 15V⎓10A; 150 W
Cable length: 12.8 ft. (3.9 m)
Dimensions (H × W × D):
Light only: 13.1 × 21.4 × 3.1 in. (33.4 × 54.3 × 7.9 cm)
With yoke: 16.25 × 23.6 × 3.1 in. (41.3 × 60 × 7.9 cm)
Weight: 10.7 lb. (4.85 kg)
(with barndoors and yoke, without batteries)
sPecifications

GG3
ONE-YEAR LIMITED WARRANTY
This Genaray product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date
or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of
any product that fails during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by Genaray. If the product
has been discontinued, Genaray reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, GENARAY MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty provides you with specific legal rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Genaray Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Genaray along with the
RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk
and expense.
For more information, or to arrange service, visit www.genaray.com or contact us at [e-mail].
© 2023 Genaray. All Rights Reserved.