Genie GS-3384 User manual

Operator's Manual
Serial Number Range
GS
-
3384 from 43032 ANSI/CSA
North America
South America
Asia
GS
-
3390 from 47263
GS
-
4390 from 47263 AUS
Australia
GS
-
5390 from 47263
with
Maintenance
Information
Fourth Edition
Fourth Printing
Part No. 133564

Operator's Manual Fourth Edition • Fourth Printing
GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
Front Matter
Important
Read, understand and obey these safety rules and
operating instructions before operating this
machine. Only trained and authorized personnel
shall be permitted to operate this machine. This
manual should be considered a permanent part of
your machine and should remain with the machine
at all times. If you have any questions, contact us.
Contact Us:
Internet: www.genielift.com
E-mail: [email protected]
Contents
Introduction ........................................................... 1
Symbol and Hazard Pictorials Definitions............. 4
General Safety ...................................................... 6
Personal Safety................................................... 10
Work Area Safety................................................ 11
Legend ................................................................ 19
Controls............................................................... 20
Inspections.......................................................... 25
Operating Instructions......................................... 38
Transport and Lifting Instructions ....................... 44
Maintenance ....................................................... 47
Specifications...................................................... 51
Copyright © 2002 by Terex Corporation
Fourth Edition: Fourth Printing, November 2015
Genie is a registered trademark of Terex South Dakota, Inc.
in the U.S.A. and many other countries. “GS” is a trademark
of Terex South Dakota, Inc.
These machines comply with
ANSI/SIA 92.6
CAN B.354.4

Fourth Edition • Fourth Printing Operator's Manual
Introduction
Part No. 133564 GS-3384 • GS-3390• GS-4390• GS-5390 1
Introducti on
Owners, Users and Operators:
Thank you for choosing our machine for your
application. Our number one priority is user safety,
which is best achieved by our joint efforts. We feel
that you make a major contribution to safety if you,
as the equipment users and operators:
1 Comply with employer, job site and
governmental rules.
2 Read, understand and follow the instructions
in this and other manuals supplied with this
machine.
3 Use good safe work practices in a
commonsense way.
4 Only have trained/certified operators,
directed by informed and knowledgeable
supervision, running the machine.
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer’s instructions and safety
rules—safety and operator’s manuals and
machine decals.
You read, understand and obey employer’s
safety rules and worksite regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.

Operator's Manual Fourth Edition • Fourth Printing
Introduction
2 GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
Hazard Classification
Decals on this machine use symbols, color coding
and signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates a property damage
message.
Intended Use
This machine is intended to be used only to lift
personnel, along with their tools and materials to
an aerial work site.
DANGER
WARNING
CAUTION
NOTICE

Fourth Edition • Fourth Printing Operator's Manual
Introduction
Part No. 133564 GS-3384 • GS-3390• GS-4390• GS-5390 3
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.

Operator's Manual Fourth Edition • Fourth Printing
Symbol and Hazard Pictorials Definitions
4 GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
Symbol and Hazard P ictorials Definiti ons
Read the operator’s
manual
Read the service
manual
Crush hazard Crush hazard Collision hazard
Tip-over hazard Tip-over hazard Tip-over hazard Tip-over hazard Electrocution hazard
Electrocution hazard Explosion hazard Fire hazard Burn hazard Skin injection hazard
Engage safety arm Keep away from
moving parts
Keep clear of
outriggers and tires
Move machine to
level ground
Close chassis tray
Lower the platform Do not set up where it
cannot be leveled
with outriggers
Maintain required
clearance
Only trained
maintenance
personnel should
access
compartments
Use a piece of
cardboard or paper to
search for leaks

Fourth Edition • Fourth Printing Operator's Manual
Symbol and Hazard Pictorials Definitions
Part No. 133564 GS-3384 • GS-3390• GS-4390• GS-5390 5
Chock the wheels Release brakes Tiedown Lanyard attachment
point
No smoking
Wheel load Transport diagram Side force Wind speed Outrigger load
Voltage rating for
power to platform
Pressure rating for air
line to platform
Maximum
capacity
Crushing hazard Hold rail while lowering
Collision hazard Chock the wheels

Operator's Manual Fourth Edition • Fourth Printing
General Safety
6 GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
General Safety

Fourth Edition • Fourth Printing Operator's Manual
General Safety
Part No. 133564 GS-3384 • GS-3390• GS-4390• GS-5390 7

Operator's Manual Fourth Edition • Fourth Printing
General Safety
8 GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564