Multi-Streams Ultra High Definition Box IP Camera Quick Guide
This guide is for quick installing and connecting the Multi-Streams Ultra High Definition Box IP Camera. For more
details, please refer to the Installation Manual of the camera in the supplied CD.
Camera‘sConnectors
No. Connector Definition
1 Audio I/O Two-way audio transmission (listen only with GEUTEBRUECK DVRs)
2 Power LED Power connection indication (green light)
3 Default Button Press the button with a proper tool for at least 20 seconds to restore the
system.
4 Auto Iris Auto iris lens connection
5 PoE Network For network and PoE connections
6 Network LEDs For network connection and activity indication
7 Alarm I/O
1 Alarm Out +
2 Alarm Out –
3 Alarm In +
4 Alarm In –
8 BNC Analog video output (stream dependant)
9 microSD Card Slot Insert the microSD card into the card slot to store videos and snapshots.
Do not remove the microSD card when the camera is powered on.
10 Power (DC 12V / AC 24V) Power connection
NOTE: It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to
support long term continuous data read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and the life expectancy.
CameraCabling
Please follow the instructions below for cable connections.
Power Connection
Please use a DC 12V / AC 24V power adaptor and plug it to the power connector of the camera and the power outlet.
If users wish to use an AC 24V power adaptor, please first plug the supplied power switch to the power connector of
the camera. Alternatively, users can use an Ethernet cable and connect it to the RJ-45 connector of the camera and a
Power Sourcing Equipment (PSE) switch.
NOTE: If PoE is used, make sure PSE is used in the network.
Ethernet Cable Connection
Connect one end of the Ethernet cable to the RJ-45 connector of the camera, and plug the other end of the cable to
the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to
the PC.
NOTE: Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please check
the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
Before Login to the Camera
A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the
camera, please ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and
plug-ins or setting Internet’s security level to default. For further details, please refer to the User’s Manual in the
supplied CD.
ActiveX Controls and Plug-ins Settings Internet Security Level
Step 1: Start the Internet Explorer (IE).
Step 2: Select <Tools> from the main menu of the
browser. Then click on <Internet Options>.
Step 3: Click on the <Security> tab and select
<Internet>, and click on <Custom level> to
change ActiveX settings.
Step 4: Set “ActiveX controls and plug-ins” items to
Step 1: Start the Internet Explorer (IE).
Step 2: Select <Tools> from the main menu of the
browser. Then click on <Internet Options>.
Step 3: Click on the <Security> tab and select
<Internet>.
Step 4: Down the page, click <Default Level> and click
on <OK> to confirm the setting. Close the
browser window, and open a new one later for
accessing the IP camera.
Camera Login
The default setting of the camera is: DHCP. You can find the camera via the Device Searching Tool which is on CD.
If no DHCP server is in network, the camera sets itself to IP address 192.168.0.250. If you now want to get access to
the camera, please set the IP address of the PC as: 192.168.0.XXX; for example:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Login ID and Password
•Key in the camera’s IP address in the URL bar of the web browser window and hit on “Enter”.
•Enter the default username (root) and password (admin) in the prompt request dialogue. Note that username is
case sensitive.
Install the ActiveX Control
•After connecting to the camera, the request for installing the ActiveX control will appear just below the URL bar.
•Right click on the information bar, and then click on <Install ActiveX Control…> to permit ActiveX control
installation.
•In the pop-up security warning window, click on <Install> to start downloading DC Viewer software on the PC.
•Click on <Finish> after DC Viewer installation is completed.
2 3
2 3
