Gigaset SL910 User manual

Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / Cover_front.fm /
Congratulations
By purchasing a Gigaset, you have chosen a brand that is fully committed
to sustainability. This product’s packaging is eco-friendly!
To learn more, visit www.gigaset.com.

Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / Cover_front.fm /

1
Gigaset SL910/SL910A – with the special "touch"
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / introduction.fm / 14.09.2011
Version 4.1, 21.11.2007
Gigaset SL910/SL910A – with the special "touch"
Congratulations on your purchase of the first Gigaset with touchscreen. This phone sets new
standards with its high-quality genuine metal frame, 3.2" TFT colour touchscreen and excel-
lent sound quality and, last but by no means least, its impressive interior qualities. Your Gigaset
can do a lot more than just make calls:
For more information about your phone, visit www.gigaset.com/gigasetsl910
After purchasing your Gigaset phone, please register it at www.gigaset.com/service –
this will ensure any questions you may have or warranty services you request are dealt with
even faster!
Have fun using your new phone!
Set up one of the three home screens according to your needs
Bring together the important functions and numbers, which you can start up or call directly
from idle status with a single "touch".
Customise
Give each caller his own personal portrait, look at your personal pictures as a screensaver slide
show and load the ringtones you want onto your handset.
Make sure your phone is always up-to-date
Use the base's Ethernet connection to download new and expanded versions of the base
firmware directly from the Internet.
You can load new handset software from your PC to the handset using our Gigaset QuickSync
software.
Other practical information
Copy directories from existing Gigaset handsets, use the QuickDial function, adapt your
Gigaset to your handsfree needs. Use the silent alert, the time control for calls and much
more...

2
Contents
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / SL910A-QUGIVZ.fm / 14.09.2011
Version 4.1, 21.11.2007
Contents
Gigaset SL910/SL910A – with the special "touch" . . . . . . . . . . . . . . . . . . . . 1
Overview of handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
The base at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Checking the package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the base and charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting the base with the phone network and the mains power supply . . . . . 9
Connecting the handset charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting up the handset for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting up the base and handset – installation wizard . . . . . . . . . . . . . . . . . . . . . . . . . 13
Handset in idle status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Activating/deactivating the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Operating the touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Handset idle display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Scrolling through lists (vertical scrolling) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Entering numbers and text, incorrect entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Returning to idle status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Returning to the previous display page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Activating/deactivating key and display lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Menu tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Applications menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Making an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Accepting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Handsfree mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Switching to mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Security check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Customer Service & Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Manufacturer warranty (Middle East) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Service Centres (Midde East) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

3
Overview of handset
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / overview.fm / 14.09.2011
Version 4.1, 21.11.2007
Overview of handset
Status bar (¢page 20)
The internal handset name (e.g., INT 1) and icons
(¢page 4) that display the current settings and
the operating status of the phone
Touch the status bar to display the status page.
Navigation area (¢page 19)
Page position marker ,
change page ê/ë.
Keypad
Numerical keypad to enter phone numbers
Å Ä Ä
vMenu key
Press briefly: open main menus (¢page 21)
Press and hold: activate/deactivate key and display
lock (¢page 26)
Handset keys:
c Talk key
Dial displayed number, accept call
During a call/during playback of messages from
answering machine/when establishing a connec-
tion: switch between earpiece and handsfree mode
In idle status: open redial list (press briefly)
a End call/end key
Press briefly: end (active) call/paging call, reject
internal call
Switch off ringtone for external call
Otherwise: return to idle status
Press and hold: activate/deactivate handset
Touchscreen/display (¢page 18)
Sample display: "dial page" for entering phone num-
bers in idle mode (one of three idle display pages;
¢page 19).
Option slider (¢page 24)
Displays the possible actions
Ð INT Ã òô ó¼06:00 V
<
ÅÄÄ
>
ç
123
ABC DEF
456
GHI JKL MNO
789
PQRS TUV wxyz
*0#
˜Âí å
Calls Contacts QuickDial Internal
Underside of the handset: Mini USB connection socket
Connect wire-bound headset or handset to your PC
(Gigaset QuickSync)
Charging contacts
Message LED
Proximity sensor (¢page 26)

4
Overview of handset
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / overview.fm / 14.09.2011
Version 4.1, 21.11.2007
The base at a glance
Display icons
Icons on the status bar
The following icons are displayed in the status bar depending on the settings and the operating
status of your telephone:
Paging key
Press briefly:
Start paging
Press and hold (approx. 3 seconds):
Set base to registration mode
Flashes:
Base in registration mode
Lights up:
LAN connection active (for firmware update only)
Icon Meaning
Signal strength (Eco Mode+ off )
76%–100%
51%–75%
26%–50%
1%–25%
Red: no connection to the base
Eco Mode+ activated:
White if Eco Mode is off
Green if Eco Mode is on
Answering machine activated
(SL910A only)
Bluetooth activated or
Bluetooth headset/data device con-
nected
Ringtone deactivated
Alarm switched on and wake-up time
set
Ð
White if
Eco Mode is off
Green if
Eco Mode is on
}
i
Ñ
Ò
¹
¹
Ã
ò
ò ô
ó
¼06:00
Battery charge status:
{White: charged over 66%
{White: charged between 34%
and 66%
yWhite: charged between 11%
and 33%
yRed: charged below 11%
yFlashing red: battery almost empty
(less than 10 minutes talktime)
Battery charging
(current charge status):
xy0%–10%
xy 11%–33%
x{34%–66%
x{ 67%–100%
Icon Meaning

5
Overview of handset
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / overview.fm / 14.09.2011
Version 4.1, 21.11.2007
Option slider icons
The functions on the option slider change depending on the operating situation.
Icon Action
†Activate handsfree mode
†(orange) (Handsfree mode is activated)
Deactivate handsfree mode
ŽHandsfree profile
–Deactivate handset microphone
–(orange) Reactivate handset microphone
”Deactivate ringtone
”(orange)
(The ringtone is deactivated)
Reactivate ringtone
RSet volume
—Open call lists
œOpen directory
¬Copy number to directory
Create SMS
Send SMS
®Reply to SMS
;Open drafts list
øDe-register handset
‡Open list of internal callers/make
internal call
dCreate new directory entry
PInitiate consultation call
P(orange) End consultation call
Initiate three-way conference
call
(orange) End conference call
¥QuickDial
:Copy list
<Add name, number etc. to an
entry
=Copy entry
NEdit entry
QShow keypad
m
¾
T
T
XDetermine free memory in the
resource directory
þSearch
Skip settings
Delete
èSave/select
nEnter new appointment
>Calendar: Set selected date
to Today
YChange order (sort by last name
or first name)
÷Directory entry:
Delete caller ringtone assign-
ment
\Directory entry:
Delete caller picture assignment
þDelete anniversary
ÿTrust Bluetooth device found
Divert call to answering machine
ûPlay messages
ý(red) Record announcement
úStop recording
öFor message playback: Go back
five seconds
Please note
The menu icons can be found in the
menu overview on page 27.
Icon Action
õ
ü

6
Overview of handset
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / overview.fm / 14.09.2011
Version 4.1, 21.11.2007
Other display icons:
Signalling icons
Establishing a connection
(outgoing call)
#
Connection established
Connection cannot be
established or connection
interrupted
Øw Ú
Internal/external call
Ã
Answering machine
is recording
ØÙÚ
Alarm call
š b
ØðÚ
Reminder call for anniversary
Øá Ú
Reminder call for
appointment
Information
-
(Security) prompt Please wait...
À
Action failed (red)
‰
Action complete (green)
,
Warning
+
Please note
This quick user guide only describes a small proportion of your base's functions. A detailed
description of all functions in the menu tree can be found in the long user guide for your
Gigaset SL910/SL910A on the enclosed CD.

7
Safety precautions
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / security.fm / 14.09.2011
Version 4.1, 21.11.2007
Safety precautions
Warning
Read the safety precautions and the user manual before use.
Explain their content and the potential hazards associated with using the telephone to your
children.
Use only the power adapter supplied, as indicated on the rear of the base.
Use only the supplied, original batteries as this could otherwise result in significant
health risks and personal injury. Replacement batteries can be obtained via the
Gigaset Service Hotline.
Using your telephone may affect nearby medical equipment. Be aware of the tech-
nical conditions in your particular environment, e.g., doctor's surgery.
If you use a medical device (e.g., a pacemaker), please contact the device manufac-
turer. They will be able to advise you regarding the susceptibility of the device to
external sources of high frequency energy. Please refer to the "Appendix" chapter for
the specifications of this Gigaset product.
Do not hold the rear of the handset to your ear when it is ringing or when handsfree
mode is activated. Otherwise you risk serious and permanent damage to your hear-
ing.
Your Gigaset is compatible with the majority of digital hearing aids on the market.
However, perfect function with all hearing aids cannot be guaranteed.
The handset may cause interference in analogue hearing aids (humming or whis-
tling) or cause them to overload. If you require assistance, please contact the hearing
aid supplier.
Do not install the base or charger in bathrooms or shower rooms. The base and
charger are not splashproof.
Do not use your phone in environments with a potential explosion hazard (e.g., paint
shops).
If you give your phone to a third party, make sure you also give them the user guide.
Remove faulty bases from use or have them repaired by our Service team, as these
could interfere with other wireless services.
Please note
uNot all functions described in this user guide are available in all countries and with all net-
work providers.
uThe device cannot be used in the event of a power failure. In this case, it is also not possi-
ble to transmit emergency calls.
$
ƒ

8
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
First steps
Checking the package contents
uOne Gigaset SL910/SL910A base
uOne power adapter for the base
uOne phone cable (flattened)
uOne Gigaset SL910H handset
uOne battery cover (rear cover for the handset)
uOne battery
uOne charger
uOne power adapter for the charger
uOne user guide.
Installing the base and charger
The base and charger are designed for use in dry rooms in a temperature range of
+5°C to +45°C.
¤Set up the base on a level, non-slip surface at a central point in the building or
mount the base on the wall.
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
uNever expose the telephone to the effects of heat sources, direct sunlight or
other electrical devices.
uProtect your Gigaset from moisture, dust, corrosive liquids and fumes.
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode is activated.

9
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
Connecting the base with the phone network and the mains
power supply
Please note:
uThe power adapter must always be connected, as the phone will not operate
without a power supply.
uUse only the power adapter and phone cord supplied. Pin connections on tele-
phone cables can vary.
¤Insert the phone cable (cable
slightly flattened) into the lower
connection socket at the rear
of the base.
¤Insert the power cable for the
power adapter into the upper
connection socket at the rear
of the base.
¤Insert both cables into the
appropriate cable channels .
¤First, connect the power adapter
.
¤Then connect the phone jack
.
C
B
A
C
A
B
C
B
A
A
B

10
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
Connecting the handset charger
¤Connect the flat plug
on the power adapter .
¤Plug the power adapter
into the plug socket .
1
2
If you have to remove the plug from
the charger again:
¤Disconnect the power adapter
from the mains power supply.
¤Press the release button
and disconnect the plug .
3
4
2
1
3
4

11
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
Setting up the handset for use
The handset's display and keys are covered with a protective film. Please remove
the protective film!
Inserting the battery and closing the battery cover
To reopen the battery cover to replace the battery:
¤Insert your fingernail into the
cavity on the bottom of the
battery cover and pull the bat-
tery cover upwards.
Warning
Please do not use any touchscreen styli to operate the handset!
Do not use any protective sleeves/films from other manufacturers, as they may
restrict the operation of your handset.
Warning
Use only rechargeable batteries recommended by Gigaset Communications
GmbH, as this could result in significant health risks and personal injury. For
example, the outer casing of the battery could be destroyed or the battery
could explode. The phone could also malfunction or be damaged as a result of
using batteries that are not of the recommended type.
¤First insert battery with the
contact surface facing down .
¤Then press the battery down-
wards until it clicks into
place.
1
2
¤First, align the protrusions on the
side of the battery cover with the
notches on the inside of the cas-
ing.
¤Then press the cover until it clicks
into place.
1
2

12
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
¤To remove the battery,insert
your fingernail into the cavity
on the casing and pull the bat-
tery upwards.
Charging the battery
The battery is supplied with a partial
charge. Please charge it completely before
use.
¤Charge the handset in the charger for
5hours.
¤Place your handset back in the charger
after every call.
Please note
The handset must only be placed in the
designated charger.
5 h
Please note
uHandsets contained in the package have already been registered to the base.
If, however, a handset has not been registered (display "Handset not regis-
tered to any base"), please register it manually.
uThe battery is also charged if the handset is connected via a USB connection
to a PC with a power supply of 500 mA.
uThe battery may heat up during charging. This is not dangerous.
uAfter a time, the charge capacity of the battery will decrease for technical
reasons.

13
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
Setting up the base and handset – installation wizard
Once the handset has been charged sufficiently, the installation wizard starts auto-
matically. It helps you to configure the following key settings on the handset and
base, which are required for operation:
uTime and date
uDisplay language
uCountry in which the phone will be used
uYour own area code
If you do not want to configure the set-
tings at this point:
¤Touch the [ Skip Settings] option
at the bottom of the display.
The handset then switches to idle status.
You can configure the settings at a later
stage using the Settings menu on your
handset.
To configure the settings:
¤Touch the ’icon next to the time to
set the time.
¤Use the left-hand number wheel to
select the current hour by touching the
number wheel with a finger and mov-
ing it upwards or downwards. The
number wheel will follow your move-
ments.
¤Operate the right-hand number wheel
in the same way to select the minutes.
¤Specify whether you wish the time to
be displayed in 12 hrs or 24 hrs mode.
To do this, touch the corresponding
area under Time Format.
The current setting is highlighted.
¤Touch the ‘icon (at the top left of the
display) to return to the Welcome
page.
LWelcome
Time
00:00 M
Date
01.04.2010 M
Display Language
English M
Country
United Arab Emirates M
Area (Dial Code)
(Not configured) M
õ‰
Skip Settings Save Setting
õ
LTime
Time
22 58
23 59
00 :00
01 01
02 01
Time Format
24 hrs 12 hrs
2

14
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
Comment: If you set the 12 hrs mode, am/pm is shown next to the number
wheels.
¤Touch the ’icon next to Date to set
the date.
¤Use the three number wheels to set the
current date. The procedure is the
same as for setting the time.
The current mode for displaying the date
is displayed under Date Order (here: Day
Month Year). If you want to change the
mode:
¤Touch the ’icon.
¤Touch the required mode Day Month
Year / Month Day Year.
The selected mode is marked with Ø.
¤Touch the ‘icon to return to the Date
page.
¤Touch the ‘icon again to return to
the Welcome page.
The current language is displayed under
Display Language.
If you want to change the setting:
¤Touch the ’icon next to the language
displayed.
Date
01.04.2010 M
Display Language
English M
Country
M
LDate
Date
30 Jun 2013
31 May 2012
01 .Apr .2011
02 Mar 2010
03 Feb 2009
Date Order M
Day Month Year
LDate Order
Day Month Year Ø
Month Day Year ±
LWelcome
Time
08:30 M
Date
01.07.2011 M
Display Language
English M
Country
M

15
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
This brings up a list containing all the
available languages.
The current language is marked with Ø.
¤Touch the required language.
If your language is not displayed, the list
may be "longer" than the display. You
must then scroll through the list.
¤To do this, put a finger on the display
and move it slowly upwards.
The lower section of the list is then dis-
played and you can select a language.
After selecting the language, the follow-
ing security prompt is displayed:
¤Touch the èicon and the ‘icon on
the following display screen (top left of
the display).
You return to the Welcome page.
Enter the country under Country in which
you will operate the phone and for which
it is authorised. If the setting is not com-
patible:
¤Touch the corresponding ’icon.
A list of countries is displayed.
The current country is marked with Ø.
¤Touch your country. You may have to
scroll through the list as described pre-
viously. The Øicon moves to this
country.
¤Touch the ‘icon again to return to
the Welcome page.
LDisplay Language
English Ø
Français ±
Castellano ±
Nederlands ±
Italiano ±
Português ±
Change language?
-
‰
LWelcome
Country
United Arab Emirates M
Area (Dial Code)
(Not configured) M
õ‰
LCountry
United Arab Emirates Ø
United Kingdom ±
USA ±
Uruguay ±
Venezuela ±

16
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
Please note
If you have selected Other Country instead of a country, the Welcome page will
also show the Country (Dial Code) entry.
¤Touch the corresponding ’icon and enter the International Prefix and
International Area Code for the international country code, as described
below for the area code.
Proceed as described below.
Finally, you have to enter your area code:
¤Touch the corresponding ’icon.
The Local Prefix refers to the country-spe-
cific prefix that is put in front of the area
code when you do not dial the country
code.
The Local Prefix is only displayed if it is
not already stored in the phone for the
selected country.
¤Use the keypad to enter the Local Pre-
fix if required (maximum 4 characters)
and the Local Area Code (maximum
8characters).
Before entering the numbers, briefly
touch the field where the numbers
should be entered.
You can correct incorrect entries
using $.
¤Touch èafter entering the numbers
to complete the entry.
LWelcome
Time
Area (Dial Code)
(Not configured) M
LArea (Dial Code)
Local Prefix
Local Area Code
ç ‰
123
ABC DEF
456
GHI JKL MNO
789
PQRS TUV wxyz
*0#

17
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / starting.fm / 14.09.2011
Version 4.1, 21.11.2007
Handset in idle status
Once you have configured all the necessary settings, your handset switches to idle
status. There are three idle display pages (¢page 19). When you first set up the
phone, the configurable page that you can customise is displayed. Here, you can
compile important functions and phone numbers for quick access. Some are set by
default.
Your phone is now ready for use.
The Welcome page is displayed again.
¤Touch the [ èSave Setting] option to
save your settings.
The handset switches to idle status.
LWelcome
Time
08:32 M
Date
01.07.2011 M
Display Language
English M
Country
United Arab Emirates M
Area (Dial Code)
0xx M
õ‰
Skip Settings Save Setting
ÐINT 1 ¼ 06:00 V
<
Å Ä Ä
>
˜
Call List
Â
Contacts
April 2011
28
Thursday
Status bar
Contains the internal handset name (e.g., INT 1 )
and icons that display the current settings and
the operating status of the phone. To discover
the meaning of the icons, see page 4.
Touch the status bar to display the status page
(¢page 20)
Current date
Time
Open directory
Open call lists

18
Using the phone
Gigaset SL910/910A / MEA EN / A31008-M2300-A6101-1-UZ43 / Using-The-Phone.fm / 14.09.2011
Version 4.1, 21.11.2007
Using the phone
Activating/deactivating the handset
¤Press and hold the end call key ain idle status to deactivate the handset. You
will hear a confirmation tone.
¤Press and hold the end call key aagain to reactivate the handset.
Operating the touchscreen
The Gigaset SL910H handset is primarily operated using the display and only to a
small extent using the three buttons on the handset.
Icons, list entries, buttons and sliders shown on the display are sensitive areas. You
can set up and activate functions, enter or dial phone numbers and navigate
between the various display screens (pages) by touching these areas and dragging
them across the display.
Selecting functions/list entries
To activate a function or select a list item (directory, submenu, call list), simply tap
your finger on the corresponding icon or on the required list entry on the display.
Activating/deactivating functions
Functions, e.g., room monitor, call divert, answering machine, are activated and
deactivated via buttons.
If the button slider is to the right, the func-
tion is activated. The area to the left of the
slider is highlighted (on).
If the button slider is to the left, the func-
tion is deactivated (off). The area to the
right of the slider is black.
There are two ways to operate a button:
¤Slowly drag the slider to the right or left
to activate or deactivate the function.
¤Touch the area to the right or left of the slider briefly and the slider moves to the
right or left to the area that has been touched.
on
Slider
Function
activated
On off
Slider
Function
deactivated