Gima 27403 User manual

LETTINO VISITA MEDICA TRADIZIONALE
EXAMINATION COUCH - ALUMINIUM
M27403-M-rev.1-01.23
PROFESSIONAL MEDICAL PRODUCTS
27403
MANUALE D’USO – ISTRUZIONI E MONTAGGIO
USER MANUAL – ASSEMBLY INSTRUCTIONS
È necessario segnalare qualsiasi incidente grave vericatosi in relazione al dispositivo
medico da noi fornito al fabbricante e all'autorità competente dello Stato membro in cui si ha
sede
All serious accidents concerning the medical device supplied by us must be reported to the
manufacturer and competent authority of the member state where your registered office is
located
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
[e-mail] - [e-mail]
www.gimaitaly.com
Made in Italy

4
ENGLISH
INTRODUCTION
For the purposes of Regulation (EU) 2017/745, the product falls under the CLASS I MEDICAL
DEVICES category. We advise you to read the following manual carefully before using the device.
This model has been designed with the aim of limiting any risks to the user in the event of unintentional
impact, by eliminating sharp edges, sharp corners, etc.
SAFETY
Use for purposes other than what it is intended for is not allowed.
The manufacturer declines all responsibility for damage caused by using the product the wrong or im-
proper way, or in a way unforeseen in the current manual.
For safety reasons, replace any worn or damaged parts immediately.
MAINTENANCE / CLEANING
The 1-joint examination bed does not require any special maintenance; however, before use, it is neces-
sary to check that all the moving parts are tightened correctly.
To clean the bed, a slightly damp cloth can be used; normal detergents can also be used, provided that
they do not contain chlorine and its compounds.
Attention:
• Avoid using hydrogen chloride or bleach.
ASSISTENCE
Should any of the component parts deteriorate beyond general maintenance, contact your distributor,
they will be available to advise you on the most appropriate solution to every kind of problem.
WARNINGS
The information contained in this document are subject to modications without notice having to be
given.
Disposal: the product described in this manual must be sent to specic companies for scrapping.
GENERAL INFORMATION
Examination bed with a frame made of round polished aluminium tubes Ø 30 x 2 mm thick; tted with
an elevating, manually adjustable headrest with 1 joint and 2 sections, and upholstered in soft, easily
washable faux leather. The upholstery consists of: chipboard base with low formaldehyde content, helio-
cell sponge with a density of 25 kg/sq m, 4 cm thick, convenient and comfortable.
Unassembled model supplied as a kit
TECHNICAL DATA SHEET
Dimension (L x P x H) cm 176 x 60 x 78
Capacity Kg 90
Net weight kg 22.0
Gross weight kg 27.0
Volume M3 0.21
Number of necks 1
Packaging (LxDxH) Cm 151 x 19 x 74

5ENGLISH
ASSEMBLING INSTRUCTIONS
Symbols:
Caution: read instructions (warnings)
carefully Keep away from sunlight
Keep in a cool, dry place Date of manufacture
Manufacturer Product code
Lot number Consult instructions for use
Medical Device compliant with Regulation
(EU) 2017/745 Medical Device
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies