GlammFire Apollo Crea7ion.E Series User manual

It is designed to emphasizethe unique andcontinuousexpressions of the flame.
Crea7ion is an electronic system with an innovative technology, which stand out its
simple design, practical functionality and low consumption. Its structure and solidity
ensure a perfectly safe and linear flame, while its ecological character keeps a
respecting commitment to the environment, contributing to a pleasant comfort and
well-being.
Crea7ion can be integrated into virtually any environment or directly in different types
of structures (eg.: furniture or masonry). A system totally safe for projects led by
architects, decorators andinterior designers.
Control the pleasure ofyour fire.
Wall MountedFireplaces//
Apollo Tango, MitoSmall,
Zen, Lotus
Ignition Mode//
Electronic—Remote Control
OP// Black Mirror
Crea7ion.E
GlammFire
Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
Fire Wonderland
Crea7ion By GlammFire—The line of perfection

Crea7ion.E
GlammFire
Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
Crea7ion.E

Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
GlammFire
Crea7ion.E
Tango III Crea7ion.E /Lacquered steel
OP// black, red,cream
Tango II Crea7ion.E/ Brushedstainless
steel
Tango IV Crea7ion.E / Rusted corten steel
Tango I Crea7ion.E/Leather
OP//“Mississipi red”
//“Montana white”
//“Montana black”
Mito Small I Crea7ion.E/Lacquered steel
OP// black, red,cream
Mito Small II Crea7ion.E/ Brushed stainless
steel
Mito Small III Crea7ion.E/Rusted corten steel
Tango I Crea7ion
Mito Small I Crea7ion
Apollo II Crea7ion
Apollo III Crea7ion.E/Lacquered steel
OP// black, red,cream
ApolloII Crea7ion.E/Brushed
stainless steel
ApolloI Crea7ion.E/Rusted corten
steel
Options

Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
GlammFire
Crea7ion.E
Zen III Crea7ion
Lotus III Crea7ion
Zen II Crea7ion.E/ Lacqueredsteel
OP// black, red,cream
Zen IV Crea7ion.E/Brushed stainless steel
Zen III Crea7ion.E/Rusted corten steel
Zen I Crea7ion.E/Leather
OP//“Mississipi red”
//“Montana white”
//“Montana black”
Lotus IV Crea7ion.E/Lacqueredsteel
OP// black, red,cream
Lotus III Crea7ion.E/ Brushed stainless steel
Lotus I Crea7ion.E/ Rusted corten steel
Lotus II Crea7ion.E/ Leather
OP//“Mississipi red”
//“Montana white”
//“Montana black”
Option—Black Mirror

Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
GlammFire
Crea7ion.E
Material Supplied
4.3.2.
1. Fireplace;
2. Mug;
3. Funnel;
4. Lighter;
5. Hex Key;
6. CO Detector;
7. Template;
1.
5. 7.
Components
1. Wall fastening plate;
2. Tank;
3. Combustion fire line;
4. Access door to the tank;
5. Decorative rim;
6. Access door to the valve;
7. Control valve.
6.

Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
GlammFire
Crea7ion.E
Material Supplied
4.3.2.
1. Fireplace;
2. Mug;
3. Funnel;
4. Lighter;
5. Hex Key;
6. CO Detector;
7. Template;
1.
5. 7.
Components
1. Wall fastening plate;
2. Tank;
3. Combustion fire line;
4. Access door to the tank;
5. Decorative rim;
6. Access door to the valve;
7. Control valve.
6.

Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
GlammFire
Crea7ion.E
Installation
In order to ensure a safety margin respect to the ground it is recommended to keep a
minimum distance of 400mm between the floor andthetop of the combustion fire ;
The surface which you want to install the combustion fire must be as level as possi-
ble;
Dimensions:
To access to the control valve and tank will be necessary to ensure a distance be-
tween the fireplaceand potential obstacleson lateralsides superior to 300 mm.
A ≥ 300 mm

Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
GlammFire
Crea7ion.E
Flammable materials
 Do not place flammable materials near the fireplace, within 1m;
 Racks or shelves should bedistant:
 From fireplaces: 500mm;
 From combustion fire lines: 1000 mm;
Materials: stone/metal/ceramics
 A - 150 mm;
 B - 100mm;
 C - 500 mm;
Other non-flammable materials
 A - 200 mm;
 B - 250 mm;
 C - 600 mm;

Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
GlammFire
Crea7ion.E
Installation Procedures
Very Important:
We recommend extreme caution when unpacking your fireplace. The decorative rim
is seated in the wall fastening plate, butit is loosened.
Separate the decorative rim to start the installation.
1 — Fireplace body
2 — Decorative rim
Insert the supplied batteries into the remote control
and electronic controller located on the left side of the
fireplace (A).

Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
GlammFire
Crea7ion.E
1. Washer ø5
2. Nut M5
A - 6 Holes ø8 mm
Place the fireplace in the desired location and mark the six holes required on the wall
to install it, using de supplied template .
Make sure your fireplace is level.
Choose the type of fastener suitablefor the wall material and proceed to thedrilling.
Tighten the fireplace to the wall properly. Check the stability and levelling. Make ad-
justments ifnecessary.
To complete theinstallation of your fireplace fit the decorative rim and tighten the
nuts provided.

GlammFire
Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
Crea7ion.E
Installation of optional Black Mirror
Material Supplied
4.
3.
2.
1.
1—Screws
2—Protective black mirror tape
3—Mounting bracket;
4—Black Mirror;
Optional Black Mirror Installation Procedures
Remove the decorative rim of the fireplace. Inside the fireplace there are the specific
holes (A) tomake this operation.
A

GlammFire
Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
Crea7ion.E
Screw the mounting brackets using the screws supplied and do not forget to put the
protective black mirror tapes (B).
B
Place the black mirror, inserting it into the upper mounting bracket. When docked
touch itinside the fireplace (C).
C

GlammFire
Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
Crea7ion.E
Let the black mirror slide slowly, without dropping it, to fit into the lower mounting
bracket. (D)
Make all procedures very carefully so asnot to damagethe black mirror.
D

GlammFire
Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
Crea7ion.E
Finally proceed to the setting of decorative rim (E).
The installation of your fireplace is complete.
E

GlammFire
Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
Crea7ion.E
Operation Instructions
 Access to the tank through the access door on the right side
of the fireplace;
 Access to the deposit of bioethanol through the access door
on the right side of the fireplace; With the help of the funnel
and mug provided fill the desired amount of fuel (maximum:
3 litres). Check the filling level throughthe viewfinder;
 Light the fireplace: Press A+ Bsimultaneously
 After a few seconds will be issue multiple beeps and then it
will happen a discharge that will cause the deflagration of
the flame. If the deflagration does not occur, make another
attempt.
 If bioethanol is too cold it will be necessary to light using the
lighter supplied.
A
B
C
D
 For security reasons it is not possible to light the fireplace when combustion fire
line is hot, you will need to wait about 20 to 30 minutes.
 Flame regulation: Ato increase, Cto decrease.
 Switch off: Press B
After cutting flame may remain small residual flames at the point of fuel inlet for ap-
proximately 2 to 10 minutes. At the end of that time the flame becomes extinctcom-
pletely.
 Levelling of combustion fire line
If the flame does not occupy the entire opening will be necessary to level the com-
bustion fire line.
Lack of flame on the left: Turn the screw clockwise to clockwise. Parallel turn the
screw counter clockwise.
Lack of flame on the right side: Turn the screw clockwise to clockwise. Parallel turn
the right screw counter clockwise.
Repeat the procedure described till to geta uniform flame.

GlammFire
Tel[phone]
Fax[phone]
[e-mail]
www.glammfire.com
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO
PORTUGAL
GlammFire
PT04471-A
Crea7ion.E
Overall Dimensions/Specifications
MODEL Dimensions (mm)
(H x W x D ) Weight (kg) Capacity (litres) Power (kW)
Apollo 650 x 1450 x 223 86 3 6
Lotus 800 x 800 x 223 63 3 1,8
Mito Small 1000 x 650 x 223 64 3 3
Zen 1100 x 750 x 223 72 3 3
Tango 700 x 1100 x 223 74 3 1,8
Combustion
fire line
800
250
400
400
250
Autonomy
(hours)
3
9:30
6
6
9:30