GlammFire Crea7ion EvoPlus Thales User manual

INSTRUCTIONS MANUAL
Crea7ion
Combustion Fire Line
Ignition Mode:
Mechanical—Lighter

GlammFire. PAG./2
ÍNDEX
1—Material Supplied 3
2—Components 3
3—Safety Instructions 4
3.1—Ventilation 4
3.2—Cautions 4
4—Fuel 6
4.1—Bioetanol –The adequate fuel 6
5—Installation 7
5.1—Dimensions 7
5.2—Flammable material 8
5.3—Materials: stone/metal/ceramics 8
5.4—Other non-flammable materials 8
5.5—Tools Required 9
5.6—Installation Procedures 9
6—Operation Instructions 12
7—Troubleshooting 13
8—Maintenance 13
9—Overall Dimensions 14
10—Especifications 14
11—After-Sales Service 14
12–Guarantee 14

1—Material Supplied
4.
3.
2.
1. Combustion fire line;
2. Tank;
3. Mug;
4. Funnel;
5. Lighter;
6. Hex Key;
7. Access door;
2—Components
5.
Please read this Instruction Manual carefully before using your decorative fireplace. It contains important operating
and maintenance instructions, that should be followed correctly, in order to ensure a durable use of your decorative
fireplace.
All presented cautions and warnings must be respected.
Keep this manual for future reference.
This Instruction Manual is subject to change without notice.
6.
1. Combustion fire line;
2. Valve;
3. Tank;
4. Leak Detector ;
1. 2. 3.
4.
1.
7.

GlammFire. PAG./4
3—Safety Instructions
3.1—Ventilation
It is recommended that you keep a good ventilation of the area, in order to ensure a healthy level of oxygen.
Biothanol combustion releases carbon dioxide (CO2) and water (H2O). The combustion requires oxygen, therefore the
area where the fireplace is should have adequate ventilation with ventilation grids or other means, to allow air quality
and circulation.
3.2—Cautions:
Glammfire is concerned about your safety, therefore we have taken all necessary consideration for conception, fabri-
cation, assembly and transport, to ensure perfect functioning.
We therefore ask you to thoroughly follow our instructions for assembly, use and maintenance.
 Do not cover your decorative fireplace;
 Keep it away from flames, ignition sources, and flammable materials;
 Do not place the fireplace near windows or doors that can create drafts. These drafts may cause irregular function-
ing;
 Do not blow to the combustion fire line when igniting or during normal functioning of the fireplace;
 Keep a regular watch, during use of the fireplace;
 Keep children and animals away from the fireplace. Children do not recognize danger. Therefore make sure children
are kept at a safe distance;
 Keep children watched when fireplace is working;
 The fireplace should not be exposed to direct sunlight or any heat source, as it may damage its materials;
 If you spill bioethanol onto the floor absorb it with a cloth, and then clean with a wet cloth, to avoid ignition out-
sider the combustion fire line and stains on the floor;
 In case you spill bioethanol in the fireplace clean it immediately with a wet cloth, to avoid ignition outside the com-
bustion fire line and damages to the finishing of the fireplace (paint, lacquers, leathers, amongst others);
 Attention: While working the fireplace may achieve very high temperatures. Therefore avoid touching it. Areas of
potential contact with skin may cause burns;
 Do not fill the combustion fire line while hot, wait for it to cool down;
 Never pour bioethanol over the flame;
 After extinction of the flame wait approximately 15 minutes before handling the fireplace;
 In case of fire use a fire blanket or a fire extinguisher;

 Do not use water to extinguish the fire;
 Do not use chemical products to clean the fireplace, as they may damage the materials. When in doubt contact an
authorized dealer;
 After flame cutting may remain small residual flames at the point of fuel inlet for approximately 2 to 10 minutes. At
the end of this time the flame will extinguish naturally;
 If bioethanol pours out during the process of filling up the tank, clean the tank and surrounding area;
 Decorative stones, wood or other accessories should not be placed directly on top of the burning area. Should you
use decorative accessories make sure:
 The accessories do not interfere with the flame;
 Are only for decorating the fireplaces and combustion fires;
 There is no risk of falling inside the combustion fire.
 Keep the valve TURNED OFF when the fireplace is not operating, and do not let any fuel at the fire line. As a volatile
liquid the bioethanol loses its properties when exposed on atmosphere for long term, besides you must pay atten-
tion that the fuel shall not be easily available for children or persons who are not familiar with the product.

GlammFire. PAG./6
4—Fuel
4.1—Bioethanol –The adequate fuel
 Glammfire fireplaces are designed to work with quality bioethanol, fully tested. Only this fuel ensures clean and
efficient combustion. Fuel with less or inappropriate quality may lead to:
 Higher probability of malfunction;
 Reduction in durability of the system;
 Incomplete and inefficient combustion;
 Smoke and odours;
 Residues inside the combustion fire line.
 Bioethanol is internationally recognized as being the major source of renewable energy, 100% ecological and
environmentally friendly. It is made from fermentation and distillation of sugars from plants, such as sugar cane,
potato, beetroot and cereals;
 The use of bioethanol guarantees a reduction of 85% in CO2 emissions, therefore contributing for the reduction of
global warming;
 Use only bioethanol as fuel. Only bioethanol will make a clean and perfect combustion;
 Keep bioethanol away from children and animals, as well as from a working fireplace;
 Avoid contact with eyes and skin;
 Do not drink bioethanol. In case you do go to the nearest hospital;
 Bioethanol should be kept at a minimum distance of 1 m from the fireplace;
 Do not place bioethanol in front of the fireplace;
 For security reasons bioethanol should be stored at a room temperature of approximately 20 ºC.
 Use only liquid bioethanol, recommended by GlammFire.

5—Installation
The surface which you want to install the combustion fire must be as level as possible;
5.1—Dimensions:
To access to the control valve and tank (A) will be necessary to ensure a distance between the fireplace and potential
obstacles on lateral sides superior to 300 mm.
A

GlammFire. PAG./8
5.2—Flammable materials
 Do not place flammable materials near the fireplace, within 1m;
 Racks or shelves should be distant:
 From fireplaces: 500 mm;
 From combustion fire lines: 1000 mm;
5.3—Materials: stone/metal/ceramics
 A - 100 mm;
5.4—Other non-flammable materials
 A - 250 mm;
A

5.6—Installation Procedures
Very Important:
We recommend extreme caution when unpacking your fireplace. The decorative rim is seated in the wall fastening
plate, but it is loosened.
In the installation placement, using the Hex Key (A), level the combustion fireline using the bolts as described in the
image below.
5.5—Tools Required
Drill; Wrench; Tape measure; Pencil, Spirit Level, Phillips Screwdrivers.
A

GlammFire. PAG./
Be sure that the steel plate (B), in between the elements of the Valve and the fire line is levelled out. Adjust the steel
platform using the bolts if necessary (C). Then, proceed fitting the support basis with the screw holes pointed at (D).
B
C
D
D
WARNING: Regarding the product, any disassembling or modification, not considered in this
Manual, is strictly forbidden. The Warranty of the product will be NOT considered in case of
modification of the equipments. For questions not approached in this Manual, please search
for a skilled technician to help you.

Before each use, verify if there is some colour shifting inside the Leak Detector powder (G). If there is any difference in
color, it means there was a leakage. If so, do NOT ignite the fireplace and contact a skilled technician.
G
Any leak Leakage

6—Operation Instructions
 Ignite the fire: Rotate knob A counter clockwise (+), after a few seconds ignite with the lighter supplied, once you
verify that there is bio-ethanol in the combustion fire line.
 Flame regulation: (-) to decrease, (+) to increase
 Switch off: Rotate knob clockwise.
Once switched off residual flame near the fuel inlets may remain for approximately 2 to 10 minutes. Afterwards the
flame becomes completely extinct .
+
A
B
C
-
 At the first time you are operating the fireplace turn (C) to unlock the valve. After this procedure, please wait about
30 minutes, keeping the valve open in the maximum level.
 Always turn-off the valve if not operating.

GlammFire. PAG./
8—Maintenance
 The combustion fire line should be cleaned regularly using a damp cloth;
 The more persistent marks can be removed using a soft cloth and a mixture of lukewarm water or with a suitable
product for cleaning stainless steel;
 Never use chemicals not suitable for cleaning stainless steel;
 Do not use steel-wool or abrasive sponges. The surface can be scratched by them;
 The manufacturer is not liable for any damage arising from misuse and/or fraudulent of the product. The manufac-
turer also can not be blamed for the failure to observe the cleaning or application instructions and/ or use of any
other cleaning techniques;
 Note: Failure to follow the above rules eliminates any factory warranty on all models or fireplaces, losing the cus-
tomer the right to require repair under warranty.
7—Troubleshooting
Signal Cause Corrective action
Bioethanol does not reach
the combustion fire line
Tank without bioethanol.
Gases in the fuel circuit.
Fill the tank.
To trigger the lever on the left side of the
control valve repeatedly.
The combustion fire line
does not ignite
Very high level, the ignition electrode is
immersed in bioethanol.
Low temperature of bioethanol(<16 ° C),
there are no sufficient releasing of
bioethanol vapours to keep the flame
burning.
The combustion fire line was working and
it's hot.
Light the combustion fire line using the
lighter supplied.
Light the combustion fire line using the
lighter supplied.
Wait for 20 to 30 minutes.
The fireplace does not
respond to the command.
Low batteries. Replace the batteries in the command
and/ or the batteries in the controller.
Flame poorly distributed . The combustion fire line is not level. Run procedure described in 6.1 .

11—After-Sales Service
In case of doubt or any anomaly, do not use the fireplace and please contact a specialized technician.
12–Guarantee
2 years against manufacture defects (the warranty do not include glasses).
9—Overall Dimensions
10—Specifications

GlammFire. PAG./
GlammFire fireplaces are manufactured under the strict Standard of the world recognized ISO 9001:2008 Quality
Assurance Certificate.
GlammFire products are designed with superior components and materials, assembled by trained craftsmen who take
great pride in their work.
Once assembled the complete fireplace is thoroughly inspected by a qualified technician before packaging to ensure
that you, the customer, receive the quality product that you expect from GlammFire.
Equipment Guarantee beneficiary
Version Address
Controller Tel.
Availability date
Local…………………………………………..Date……………………..
Signature
Series and Guarantee numbers
Distributor code
Name and Address of the Distributor

PT06240-A
Recuperadores Pachinha Lda.
Zona Industrial da Lagoa, Lote G1
4950-850 CORTES - MONÇÃO PORTUGAL
Tel[phone]
Fax[phone]
[email protected]
www.glammfire.com