GlammFire Crea7ionEVO Plus Series User manual

INSTRUCTIONS MANUAL
Crea7ionEVO PLUS
WALL MOUNTED FIREPLACES

GlammFire. PAG./2

GlammFire. PAG./3
INDEX
1—Material Supplied 4
2—Components 4
3—Safety Instructions 5
3.1—Ventilation 5
3.2—Cautions 5
4—Fuel 7
4.1—Bioethanol –The adequate fuel 7
5—Installation 8
5.1—Dimensions
5.2—Flammable material 9
5.3—Tools Required 10
5.4—Installation Procedures 10
5.5—Installation of optional Black Mirror 12
5.5.1—Material Supplied 12
5.5.2—Optional Black Mirror Installation Procedures 12
5.6—Levelling of combustion fire line 16
5.7—Home Automation (Option) 17
6—Operation 18
6.1—Functions—Buttons 18
6.2—Language Selection 20
6.3—Remote Control synchronization 21
6.4—Turn on 21
6.5—Out of fuel 22
6.6—Turn off 23
6.7—Fuel reserve 23
6.8—Battery charging 24
7—Security Systems 24
7.1—Leak detection system 25
7.2—Vibration Sensor 25
7.3—Tank door locking system 25
7.4—Smothering the combustion fire line 26
7.5—Tank filter 26
7.6—Failed components 26
8—Display Messages 27
9—Maintenance 32
10—Overall Dimensions 32
11—Specifications 33
12—After-Sales Service 34
13—Warranty 34

1—Material Supplied
1. Model;
2. Remote control;
3. Manual Bioethanol Pump;
4. Mug;
5. Funnel;
6. Hex Key Nº4;
7. Template;
8. 2x Batteries;
9. Battery charger;
10. AC adapter;
2—Components
1. Combustion fire line;
2. Access door to the tank;
3. Control panel;
4. Decorative frame;
Please read this Instructions Manual carefully before using your decorative fireplace. It contains important operating
and maintenance instructions, that should be followed correctly in order to ensure a durable use of your decorative
fireplace.
All presented cautions and warnings must be respected.
Keep this manual for future reference.
This Instruction Manual is subject to change without notice.
3.
5.
1.
4
2.
6. 7. 8.
9.
10.
1.
2.
3.
4.
GlammFire. PAG./4

GlammFire. PAG./5
3—Safety Instructions
3.1—Ventilation
It is recommended that you keep a good ventilation of the area, in order to ensure a healthy level of oxygen.
Biothanol combustion releases carbon dioxide (CO2) and water (H2O). The combustion requires oxygen, therefore the
area where the fireplace is should have adequate ventilation with ventilation grids or other means, to allow air quality
and circulation.
3.2—Cautions:
Glammfire is concerned about your safety, therefore we have taken all necessary consideration for conception, fabri-
cation, assembly and transport, to ensure perfect functioning.
We therefore ask you to thoroughly follow our instructions for assembly, use and maintenance.
 Do not cover your decorative fireplace;
 Keep it away from flames, ignition sources and flammable materials;
 Do not place the fireplace near windows or doors that can create drafts. These drafts may cause irregular function-
ing;
 Do not blow to the combustion fire line when igniting or during normal functioning of the fireplace;
 Keep a regular watch, during use of the fireplace;
 Keep children and animals away from the fireplace. Children do not recognize danger. Therefore make sure children
are kept at a safe distance;
 Keep children watched when fireplace is working;
 The fireplace should not be exposed to direct sunlight or any heat source, as it may damage its materials;
 If you spill bioethanol onto the floor, you must absorb it with a cloth, and then clean with a wet cloth, to avoid igni-
tion outsider the combustion fire line and stains on the floor;
 In case you spill bioethanol in the fireplace clean it immediately with a wet cloth, to avoid ignition outside the com-
bustion fire line and damages to the finishing of the fireplace (paint, lacquers, leathers, amongst others);
 Attention: While working the fireplace may achieve very high temperatures. Therefore avoid touching it. Areas of
potential contact with skin may cause burns;
 Do not fill the combustion fire line while hot, wait for it to cool down;
 Never pour bioethanol over the flame;
 After extinction of the flame wait approximately 15 minutes before handling the fireplace;
 In case of fire use a fire blanket or a fire extinguisher;

 Do not use water to extinguish the fire;
 Do not use chemical products to clean the fireplace, as they may damage the materials. When in doubt contact an
authorized dealer;
 After flame cutting may remain small residual flames at the point of fuel inlet for approximately 2 to 10 minutes. At
the end of this time the flame will extinguish naturally;
 If bioethanol pours out during the process of filling up the tank, clean the tank and surrounding area, before using
again;
 Decorative stones, wood or other accessories should not be placed directly on top of the burning area. Should you
use decorative accessories make sure:
 The accessories do not interfere with the flame;
 Are only for decorating the fireplaces and combustion fires;
 There is no risk of falling inside the combustion fire.
GlammFire. PAG./6

GlammFire. PAG./7
4—Fuel
4.1—Bioethanol –The adequate fuel
 Glammfire fireplaces are designed to work with quality bioethanol, fully tested. Only this fuel ensures clean and
efficient combustion. Fuel with less or inappropriate quality may lead to:
 Higher probability of malfunction;
 Reduction in durability of the system;
 Incomplete and inefficient combustion;
 Smoke and odours;
 Residues inside the combustion fire line.
 Bioethanol is internationally recognized as being the major source of renewable energy, 100% ecological and envi-
ronmentally friendly. It is made from fermentation and distillation of sugars from plants, such as sugar cane, potato,
beetroot and cereals;
 The use of bioethanol guarantees a reduction of 85% in CO2 emissions, therefore contributing for the reduction of
global warming;
 Use only liquid bioethanol as fuel. Only bioethanol will make a clean and perfect combustion;
 Keep bioethanol away from children and animals, as well as from a working fireplace;
 Avoid contact with eyes and skin;
 Do not drink bioethanol. In case you do go to the nearest hospital;
 Bioethanol should be kept at a minimum distance of 1 m from the fireplace;
 Do not place bioethanol in front of the fireplace;
 For security reasons bioethanol should be stored at a room temperature of approximately 20 ºC.
 Use only liquid bioethanol, recommended by GlammFire.

5—Installation
In order to ensure a safety margin respect the recommended minimum distance of 400 mm between the floor and the
top of the combustion fire ;
The surface which you want to install the combustion fire must be as level as possible;
The model cannot be build-in, as its purpose is to hang on the wall surface, always respecting the lower ventilation
grid.
5.1—Dimensions:
To access to the control panel and tank will be necessary to ensure a distance between the fireplace and potential
obstacles on lateral sides superior to 300 mm.
A ≥ 300 mm
GlammFire. PAG./8

GlammFire. PAG./9
5.2—Flammable materials
 Do not place flammable materials near the fireplace, within 1 meter;
 Bookcases or shelves should be spaced 1 meter away of the combustion line.

GlammFire. PAG./10
5.4—Installation Procedures
Very Important:
We recommend extreme caution when unpacking your fireplace. The decorative frame is seated in the wall fastening
plate, but it is loosened.
Separate the decorative frame to start the installation.
5.3—Tools Required
Drill; Wrench; Tape measure; Pencil; Spirit Level; Phillips Screwdrivers.
1 —Fireplace body
2 —Decorative frame
1
2

GlammFire. PAG./11
Place the fireplace in the desired location and mark the six holes required on the wall to install it, using de supplied
template .
Make sure your fireplace is level.
Choose the type of fastener suitable for the wall material and proceed to the drilling.
Tighten the fireplace to the wall properly. Check the stability and levelling. Make adjustments if necessary.
A - 6 Holes ø8 mm
1. Washer ø5
2. Nut M5
To complete the installation of your fireplace fit the decorative frame and tighten the nuts provided.

GlammFire. PAG./12
5.5—Installation of optional Black Mirror
5.5.1—Material Supplied
4.
3.
2.
1.
1. Screws;
2. Protective black mirror tape;
3. Mounting bracket;
4. Black Mirror.
5.5.2—Optional Black Mirror Installation Procedures
Remove the decorative frame of the fireplace. Inside the fireplace there are the specific holes (A) to make this opera-
A

GlammFire. PAG./13
Screw the mounting brackets using the screws supplied and do not forget to put the protective black mirror tapes (B).
Place the black mirror, inserting it into the upper mounting bracket. When docked touch it inside the fireplace (C).
C
B

GlammFire. PAG./14
Let the black mirror slide slowly, without dropping it, to fit into the lower mounting bracket. (D)
Make all procedures very carefully so as not to damage the black mirror.
D

GlammFire. PAG./15
Finally proceed to the setting of the decorative frame (E).
The installation of the fireplace is complete.
E

GlammFire. PAG./16
D
F
5.6 —Levelling of combustion fire line
When installing the Crea7ionEVO PLUS, level the combustion fire line, using the supplied Hex Key Nº4 (D) and the
screws (F).
If the flame does not occupy the entire opening it will be necessary to level the combustion fire line.
- Lack of flame on the left: Turn the screw (F) clockwise to clockwise. Parallel turn the screw counter clockwise.
- Lack of flame on the right side: Turn the screw (F) clockwise to clockwise. Parallel turn the right screw counter
clockwise.
- Repeat the procedure described until you get a uniform flame.

GlammFire. PAG./17
5.7 –Home Automation (Option)
The Crea7ionEVO PLUS is equipped with a plug intended for the home automation connection (Figure 1) which must
be carried out by a qualified technician.
This option allows the burner to be switched on or off through the system installed in the room.
To connect to the home automation system, unscrew the four screws from the technical box and remove the existing
protective cover (Figure 2).
Sealed technical box with plug for home
automation
Figure 1 —Identification box home automation connection
Figure 2 —Box opening to access home automation
Note:
For the functionality of the home automation system, the device must be
switched on in standby mode (receiving energy) otherwise its functionality
will not be successful. The device will only be able to receive the proper
pulses to switch it on / off this way.

GlammFire. PAG./18
6—Operation
6.1—Functions—Buttons
I - Turn on
O - Turn off
+ - Maximum
- - Minimum
Electric wire insertion holes
Easy connection for elec-
trical wiring
To connect the electric wires slide easy connection of the burner plug, insert the electric wire and release the
connection (Figure 3).
Figure 3 —Identification of connectors
Note:
This functionality must be used with responsibility and supervision.
GlammFire is not responsible for incidents inherent to the connection to home automation.
On
Off
Comum

GlammFire. PAG./19
Before connecting the Crea7ionEVO PLUS system, you should select the power supply source—battery or electric
current. To do it, select desired option using the ON/OFF/ON button, as shown in Figure 4.
Figure 4—ON/OFF/ON Button
I - Electric current
O - OFF (without power supply)
II - Battery
I - Turn on
O - Turn off
I + O - (two bips) from Min. to
Max. or vice versa
Glamm
Fire
Display
I O
Comum

GlammFire. PAG./20
6.2—Language Selection
Language selection can only be achieved with the “ON/OFF/ ON” button in the "OFF" position.
Pressing the ON and OFF buttons ("I" + "O") on the display, choose the power supply on the "ON/ OFF/
ON" button.
Then, using the OFF button ("O") on the display, choose the language and select it with the ON button
(“I”), before the expiration time indicated on the display.
At this time, the language is already selected and the Crea7ionEVO PLUS is ready to use.
Figure 5—Localization of the input Plug.
I
Figure 6—Hole outlet for the AC adapter.
- If you want to use the system connected to the battery, you must select the "II" option.
- If you want to use the system connected to the electric current, you must select the "I" option.
If you use the Crea7ionEVO PLUS system connected to the electric current, do not forget to connect the AC adapter
we provide you, along with your Crea7ionEVO PLUS, in the proper input plug (I), situated on the left side of the system
(Figure 5).
Note: To avoid serious damage to the system, only use the AC adapter we provide you.