GlammFire Crea7ion Fire Line E. Series User manual

4.3.2.
1. Combustion fire line;
2. Tank;
3. Mug;
4. Funnel;
5. Lighter;
6. Hex Key;
7. Access door;
5.
1.
6. 7.
1. Combustion fire line;
2. Valve;
3. Tank;
4. Leak Detector ;
1. 2.
3.
4.

Installation
The surface which you want to install the combustion fire must be as level as
possible;
Dimensions:
To access to the control valve and tank (A) will be necessary to ensure a distance
between the fireplace and potential obstacles on lateral sides superior to 300
mm.
A

Flammable materials
 Do not place flammable materials near the fireplace, within 1m;
 Racks or shelves should be distant:
 From fireplaces: 500 mm;
 From combustion fire lines: 1000 mm;
Materials: stone/metal/ceramics
 A - 100 mm;
Other non-flammable materials
 A - 250 mm;
A

Installation Procedures
Very Important:
We recommend extreme caution when unpacking your fireplace. The decorative
rim is seated in the wall fastening plate, but it is loosened.
In the installation placement, using the Hex Key (A), level the combustion fire-
line using the bolts as described in the image below.
A

WARNING: Regarding the product, any disassembling or modification,
not considered in this Manual, is strictly forbidden. The Warranty of the
product will be NOT considered in case of modification of the equip-
ments. For questions not approached in this Manual, please search for a
skilled technician to help you.
Be sure that the steel plate (B), in between the elements of the Valve and the
fire line is levelled out. Adjust the steel platform using the bolts if necessary (C).
Then, proceed fitting the support basis with the screw holes pointed at (D).
B
C
D
D

Before each use, verify if there is some colour shifting inside the Leak Detector
powder (G). If there is any difference in color, it means there was a leakage. If
so, do NOT ignite the fireplace and contact a skilled technician.
G
Any leak Leakage

A1
B1
C1


