Godox SZ200 Bi User manual

Instruction Manual

705-SZ20B0-00
Made in China

: 2
: 0755-29609320(8062) : 0755-25723423 : [e-mail]
godox.com
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen, China Tel: [phone](8062) Fax: [phone] E-mail: [email protected]
GODOX Photo Equipment Co., Ltd.
LED
Zoom Bi-color LED Video Light



LEDSZ200Bi



• LED22
• 
• APP/2.4G/DMX
• 
• 
• 
• 

• 








- 01 - - 02 -
01. 
02. LED
03. 
04. 
05. 
06. 
07. U
08. 
09. 1
10. 2
11. 
12. 
13. 
14. MENU
15. FX
16. DMX
17. 
18. CCT/FN
19. DIM
20. USB
21. RJ45 x 2


  












 

DMX:OFF
1. 1~8
2. DIM
• MENU
1. CH
2. GR
3. 2.4GID
4. 
5. V0.3()
6. MAC

CH32 GR AMENU
CH: 32
ID: 99
GR: A
RESET
Ver:0.3 MAC:002F
FX
DIM:75%
CH32 GR A• XF 
• MXD 
1. DMX
OFF/1~512
DIM:75%
2800 6500
CH32 GR ACCT
1. 2800K~6500K
2. DIM
• CCT

 *1
 *1
 *1  *1
 *1
 *1
- 03 - - 04 -
6500K
 *1
 *1  *1
 *1


LED


RC-A6

• MENU
LEDCH
(132), GR(A/B/C/D/E/F,0-9)ID
(OFF/01~99)RESET
• FX
FXFX
CCT/FN
1~8CCT/FN
IIIIII 3
MENU
FX
序号 显示 场景 显示Ⅰ 显示Ⅱ 显示Ⅲ
1
2
3
4
5
6
7
8







SOS





















- 05 - - 06 -
CH32 GR AMENU
CH: 32
ID: 99
GR: A
RESET
Ver:0.3 MAC:002F
822 
• DMX
DMXDMX
(OFF/001~512),RJ45
SZLED
CH32 GR AMENU
CH: 32
ID: 99
GR: A
RESET
Ver:0.3 MAC:002F
DIM:75%
FX
CH32 GR A
DMX
• 
CCTCCT/FX
2800K~6500K)

• 
FXCCTDIMLED
(0%~100%)DIM

DIMLED

• 
20°~65°
• 
LED
1. 
0%~35%
2. LED

• USB
1. http://www.godox.com.cn/
Downloads.htmlU
2. U
USB
3. LED
4. 
UPDATE
1. UBIN
2. USB
- 07 - - 08 -


1. DMX
MENUDMXDMX
(OFF/001~512), RJ45
SZLED DMX:OFF

n
n+1
n+2
n+3
CCT FX 
0-51 52-255
DMX*(100/255) 
0-100%
0-85I
86-171II
172-255III

DMX*(100/255)
0-100%
2. 2.4G
SZ200Bi LEDRC-A6
2.4G16LED3299
ID
LED (CH)(GR)ID
LED
3. 
3.1 MENUCCT/FN
RESET,CCT/FN

CH32 GR AMENU
NO:V0.1 MAC:E230
CH:32
ID:99
GR:A
RESET
RESET...

APP

APP
DMX*(-)
/100/255 ()DMX*(/255)
1DMX

2nDMX
3
MENUMENUCCT/FN 3.2 Godox Light
APP
APP

- 09 - - 10 -
CHDIM
(1~32)
GRDIM
(A/B/C/D/E/F,0~9)
IDDIMID
(OFF/01~99)
CH32 GR AMENU
NO:V0.1 MAC:E230
CH:32
ID:99
GR:A
RESET
RESET...

LED






100% (LUX) ()
CRI ()
TLCI ()






2.4G



SZ200Bi
AC100V-240V (50/60HZ
200W
32
16 (ABCDEF,0-9)
2800K6500K
0%-100%
325001
97
96
-1040
822
/
20°~65°
APP/2.4G/DMX

50

336*198.6*165mm
2.54kg

* 

• 

• 1
• 
• 
• 
• 
• 
- 11 - - 12 -
: CMIIT ID:2020DP13510




  










 


Foreword
Warning
Thank you for purchasing this Godox Product!
This Zoom Bi-color LED Video Light SZ200Bi is a continuous light with multiple
functions. Suitable for almost all shooting occasions e.g. live, camping, portrait
shooting, make up, video, wedding, children photography, etc. It’s portable and easy
to be operated.
Features:
● Freely switch LED bicolor mode and 22 situational special effects modes
● Easy to adjust color temperature, light brightness
● Combined control by smartphone APP/2.4G wireless/DMX control
● Without noise and interference in silent mode
● Offer strong light in light burst mode
● With a colored display to clearly show the parameters
● Excellent heat dissipation system
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be
sent to an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of
waterproof in rainy or damp environment.
As this product may heat up in working, please do not touch.
Name of Body
01. Body
02. LED Beads
03. Protect Cover
04. Bowens-mount
05. Accessory Locking
Ring
06. Bracket Screw
07. U-type Bracket
08. Zooming knob
09. Thermovent 1
10. Thermovent 2
11. Handle
12. Power Socket
13. Power Switch
14. Menu Button
15. FX Button
16. DMX Button
17. Fan Button
18. CCT/FN Adjusting
Button
19. DIM Adjusting Button
20. USB Upgrade Port
21. RJ45 Port x2
- 13 - - 14 -

1. FX Special Effects Display
from 1 to 8
• Menu Interface
1. CH Chanel
2. GR Group
3. 2.4G Wireless ID
4. Bluetooth Reset Function
5. V0.3 (version number)
6. MAC(Bluetooth number)
• FX Interface
• CCT Interface
1. CCT Function Display from
2800K to 6500K
LCD Panel
Included Items
Body *1 Reflector *1 Protect Cover *1
Power Cable *1
Instruction Manual *1
Adapter *1
CH32 GR AMENU
CH: 32
ID: 99
GR: A
RESET
Ver:0.3 MAC:002F
FX
DIM:75%
CH32 GR A
DIM:75%
2800 6500
CH32 GR ACCT
6500K
• DMX Interface
1. DMX Channel Display
(OFF/1 to 512)
DMX:OFF
Diffuser *1
- 15 - - 16 -
Steel Cable *1 Clip *1
LSA-18 Power Adapter Holder *1

Optional Accessory
The product can be used in combination with the following optional accessories
so as to achieve best photography effects:
RC-A6 Remote control, inverter, softbox, umbrella, light stand, honey comb,
beauty dish, snoot, etc.
Power Supply
Connect the LED light to power source with adapter and power cable. Press the
power switch to turn on the LED light.
• Menu Button
Press the MENU button and the LED light will
enter menu interface. In this interface, CH
channel (1 to 32), GR group (A/B/C/D/E/F,0-9),
ID (OFF/01 to 99), Bluetooth function (RESET),
etc.
MENU
FX
Operation
• FX Button
Turn the CCT/FN select dial to choose the
special effect modes from 1 to 8 categories.
After choosing the current mode, short press
the CCT/FN select dial to switch the modes
from I, II and III.
No. Display Situation Display
1
2
3
4
5
6
7
8
Flash
Discontinuous
Discontinuous
Slow speed
Discontinuous
Firewood
Brief
Press conference
Frequent
Frequent
Medium speed
Frequent
Campfire
Continuous
Paparazzi
Sustainable
Sustainable
Quick speed
Sustainable
Fire hazard
Show
Display IIIDisplay II
Flash
Lightning
Broken bulb
TV
Candle
Fire
Firework
SOS
CH32 GR AMENU
CH: 32
ID: 99
GR: A
RESET
Ver:0.3 MAC:002F
CH32 GR AMENU
CH: 32
ID: 99
GR: A
RESET
Ver:0.3 MAC:002F
DIM:75%
FX
CH32 GR A
22 different special effects which are divided into 8 categories
according to your demands.
- 17 - - 18 -

DMX
• DMX Button
Short press the DMX button to enter the setting
interface. Choose DMX channels from OFF,
001 to 512. By connecting to the control center
through RJ45 port. The parameters of LED
light can be controlled by the control center.
• Fan Button
Short press the fan button to control the
on/off of the fan.
1. When the fan is off, the LED light will enter
silent mode. There is no noise and
interference in this mode and the brightness
can be adjusted from 0% to 35%.
2. When the fan is on, the LED light can be
set to strong light mode. The LED light’s
power will up to the maximum in this mode.
• Zooming Knob
By adjusting this knob, the beam angle
can be changed from 20° to 65°.
- 19 - - 20 -
UPDATE
• USB Upgrade Port
1. Download the new firmware into U disk from
official website
http://www.godox.com.cn/Downloads.html.
2. Turn off the LED light. Insert the U disk with
new firmware into the USB upgrade port.
3. Turn on the LED light, and it will
automatically enter the upgrading interface.
4. The LED light will automatically back to the
main interface.
Note: 1. The newest firmware must be downloaded from the official website
and stored in the root directory of U disk. And there can only be one BIN
document.
2. The USB port can only support firmware upgrade function.
DC 36V
• Color temperature
The LED light will auto enter color temperature adjustment interface. Turn
the CCT/FX button to choose color temperature from 2800K to 6500K.
• Brightness adjustment
In FX or CCT interface, turn the DIM select dial to adjust brightness from
0% to 100%. Press the DIM select dial once to turn off the brightness and
press it again ton recover the brightness set before.
Note: when the LED light is powered on, press the DIM select dial once
can turn on or off the brightness quickly in any interface.

1. DMX Control Setting
Control Mode Selection
In NENU interface, choose DMX options to set
DMX channels (OFF/001~512). Connect the
LED light to DMX control panel by RJ45 port.
Set them to the same channel, the LED lights
can be controlled by control panel.
2. 2.4G Wireless Control
With 2.4G wireless system, SZ series LED video light has remote grouping and
control function. It is recommended to purchase RC-A6 remote control(optional)
to achieve wireless control. Up to 16 groups of LED lights can be controlled, 32
channels and 99 IDs are available with strong anti-interference capability.
3. Bluetooth Control
3.1 Bluetooth reset function: in MENU interface,
turn the CCT/FN select dial to choose RESET.
Then, short press CCT/FN select dial to reset.
DMX:OFF
Note: the APP can be used directly on the firstly
installed device (smartphone or iPad). When
change to other mobile device(smartphone or
iPad), the light shall be reset before the normal
connection of APP.
CH32 GR AMENU
NO:V0.1 MAC:E230
CH:32
ID:99
GR:A
RESET
RESET...
- 21 - - 22 -
Note:
1. Please make LED light's channel(CH), group(GR) and ID to the same as remote control's.
2. The wireless signals can only be received in the situation that the LED light is powered on.
n
n+1
n+2
n+3
CCT FX Note
0-51 52-255
DMX*(100/255)Integer
0-100% Light Brightness
0-85: I
86-171: II
172-255: III
DMX*(100/255) Integer
0-100% Light Brightness
DMX*(Max. Color Temperature
- Min. Color Temperature)
/100/255 Integer
DMX*(Total Number of
Light Effect/255)
1. DMX means the value
set on the central control.
2. n means the channel of
DMX.
3. The channels of two
lights cannot be
overlapped.
Channel
Mode
Select CH and turn the DIM select dial to
choose channels from 1 to 32.
Select GR and turn the DIM select dial to
choose groups from A to E and 0 to 9.
Select ID and turn the DIM select dial to
choose IDs from OFF, 01 to 99.
3.2 Scan the QR code to download the "Godox Light"
smartphone APP(can be used by Android and Apple
system). For more smartphone APP operations, please
open the "help" in APP to gain detailed guidance.
Press the MENU button to enter MENU interface and turn the CCT/FN select dial:
CH32 GR AMENU
NO:V0.1 MAC:E230
CH:32
ID:99
GR:A
RESET
RESET...

* Product design and specifications are subject to change without notice.
Technical Data
LED Light
Power Supply
Output Power
Channel
Group
Color Temperature Range
Brightness Range
RGB Hue
100% Illuminance (LUX)(≈)
CRI (≈)
TLCI (≈)
Working Environment Temperature
Special Effects Modes
Mode
Zooming
Control Method
2.4G Wireless Transmission Distance
Silent Mode
Display
Dimension
Net Weight
SZ200Bi
AC100V-240V50/60HZ
200W
32
16(A, B, C, D, E, F, 0-9)
2800K~ 6500K
0%-100%
0~360°
Max. 325001-meter testing distance
97
96
-10°~40°C
8 Categories(22 kinds)
Bicolor mode/ situational mode
Beam Angle 20°~65°
Smartphone APP/2.4G wireless/
DMX intelligent control
50m
Yes
Color Display
336*198.6*165mm
2.54kg
Maintenance
This product, except consumables e.g. adapter and adapter cable, is supported
with a one-year warranty.
Avoid sudden impacts and the product should be dedusted regularly.
Maintenance of the flash must be performed by our authorized maintenance
department which can provide original accessories.
Unauthorized service will void the warranty.
If the product had failures or was wetted, do not use it until it is repaired by
professionals.
Changes made to the specifications or designs may not be reflected in this
manual.
- 23 - - 24 -
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.