Godox SL Series User manual
Instruction Manual
705-SL1520-03
SL
SL Series LED Video Light
Made in China
:2
:0755-29609320(8062):0755-25723423:godox@godox.com
godox.com
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423
E-mail: [email protected]
GODOX Photo Equipment Co., Ltd.
QCPASS
SLSL150II/SL200IISL8
8FX
2.4GXLED
0%-100%
1632
U
LCD
40
LED
- 01 - - 02 -
FX GR CH
LED
U
2
1
&
DIM
LCD
C
LCD
FX
FX
GR CH
LCD
RC-A6
*1 LED *1 *1 *1
LEDLEDON
LED
/
/ID
FX GR CH
FX GR CH
DIM0%-
100%LCD
GRCHID
GRGR
ABCDEF 0-9
CHCHCH,
1-32
IDGRCHID
DIMID
IDOF01-99
Fx1
Flash1
Fx2
Flash2
Fx3
Flash3
FX4
Storm1
FX5
Storm2
FX6
Storm3
FX7
TV
FX8
1.1 LED
1.2 LEDFXFX
FX8FX
1.3 LEDLED
()
SLSL150II/SL200IIRC-A6
LED
32100ID
LEDRC-A6ID
/
• CH/GR "-" "+" (A~F0~9)
• CH/GR2 "-" "+" (1~32)
ID
• CH/GR "-" "+" IDIDOFF,0-99
• "-" "+"
(LED)
• SET "-" "+"
"-" "+"
2500-10000K
SET
CH/GR
SET
LED
100%(LUX1)
CRI
TLCI
()
SL150II
AC100V-240V(50/60HZ)
150W
5600±200K
58000
96
97
0%-100%
-1040
32
16(ABCDEF0-9)
34x20x16cm
2.95Kg
SL200II
200W
74000
36.7x20x16cm
3.33Kg
*
Thank you for purchasing this Godox Product!
With 8 special effects modes, strong power, soft illumination and abundant functions, SL
Series LED Video Light SL150II/SL200II can achieve creative shooting easily.
Main Features:
• With 8 FX special effects mode to simulate various of shooting scene.
• Silent mode: fanless, without noises and interference.
• Strong power mode: the power can be up to the maximum value.
• Built-in Godox 2.4G wireless X system & wirelessly adjust parameters.
• With stable light source and 0% to 100% precise light adjustment.
• With 16 groups and 32 channels wireless control.
• With U-type bracket to adjust different angles easily.
• Bowens-mount enables to install various of accessories.
• Clear LCD display.
• Excellent heat dissipation.
Foreword
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent to
an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of waterproof
in rainy or damp environment.
Do not use the product in the presence of flammable gases, chemicals and other
similar materials.
As this product has built-in lithium battery, do not disassemble, impact, squeeze or
put it into fire. If serious bulge occurs, please do not use. Do not use or store the
product if the ambient temperature reads over 40°C.
Please charge the product with specialized charger and correctly operate it within the
defined voltage and working temperate according to the instruction manual.
Warning
Body
FX GR CH
Power Input Socket
& Fuse Holder
Power Switch
DIM
Select Dial
Fan Button
LCD Display
Bracket Screw
Air Inlet
C
FX Select Dial
FX Button
GR Button CH Button
Handle
Umbrella Input
U-type Bracket
Thermovent 2
LED Light
Protect Cover
Bowens Mount
Accessory
Locking Ring
Thermovent 1
Remote Control
Group
Battery Level
Indication
Brightness
Channel
Color
Temperature
Bracket Screw
Mode Selection
1.1 LED silent mode: in this mode, the fan and special effects are turned off. There is
no noises and interference in this mode.
1.2 LED special effects modes: Short press the FX button to enter or exit the special
effects. When entering the FX modes, FX icon will be displayed on the LCD panel. Then,
turn the FX select dial to choose one mode from the 8 special effects modes to achieve
creative shooting.
1.3 LED strong power mode: turn on the fan to enter LED strong power mode and the
power will up to the maximum value in this mode.
LCD Panel
LCD Panel
LED video light *1
Included Items
Separately Sold Accessories
The product can be used in combination with the following accessories sold separately,
so as to achieve best photography effects: RC-A6 remote control, Power Inverter,
Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.
Power Connection
Use the power cord to connect the LED light to an AC power source and turn on the
power switch.
Setting
Operation
Reflector for
Bowens mount
LED light *1
Lamp cover *1 Power cord *1
Group
LCD Panel
Color Temperature
Power/Light Brightness
Channel/ID
Special Effect
Light Brightness Adjustment
In LED mode, the light brightness of LED
light can be adjusted by turning the DMX
select dial from 0% to 100%. And the light
brightness will be clearly displayed on the
LCD Panel.
Group GR, Channel CH and ID Setting
GR Setting: Short press GR button to
choose group from A, B, C, D, E, F and 0 to
9.
CH Setting: Short press CH button to
choose channel from 1 to 32.
ID Setting: Long press GR and CH button
to enter ID setting interface. Then, turn the
DIM select dial to choose ID from OF and
01 to 99.
FX GR CH
FX GR CH
Display
Scene
Fx1
Flash1
Fx2
Flash2
Fx3
Flash3
FX4
Storm1
FX5
Storm2
FX6
Storm3
FX7
TV
Fx8
Broken bulb
Wireless Control
With 2.4G wireless system, SL Series SL150II/SL200II have receive and control
function. Up to multiple groups of LED lights can be controlled. 32 channels and 100
wireless IDs are available with strong anti-interference capability. Please set the
channels, groups and IDs of LED light to the same as those of RC-A6 remote control
before usage.
Adjusting Channel/Group with the Remote Control
● Press the CH/GR button and the group icon blinks.
Press the“-”“+”button to choose a group (A to F, 0 to 9).
● Press the CH/GR button twice and the channel icon blinks.
Press the“-”“+”button to choose a channel (1 to 32).
Adjusting ID with the Remote Control
● Double click the CH/GR button and press the“-”“+”button to choose ID from OFF or 0
to 99.
Adjusting Light Brightness with the Remote Control
● Press the“-””+“button to adjust the light brightness.
Adjusting Color Temperature with the Remote Control (The color temperature
value of this LED light cannot be adjusted)
● Press the SET button of the remote control and the color temperature icon blinks.
Press the“-”“+”button
to adjust the color temperature.
Remote control reset: press down "-" and "+" button simultaneously to reset.
Note: The wireless signal can be received only when the controller of LED
light is powered on.
Remote control is available separately.
Setting color temperature range
The factory setting of remote control's color temperature range is 2500-10000K.
In order to use remote control conveniently, color temperature range settings are
added: when the remote control is off, hold down the SET button and turn it on to enter
color temperature adjusting interface. Press CH/GR button to switch the lowest and
highest color temperature value and press "-" or "+" button to change the value. Press
the SET button to confirm it.
LED Video Light
Power Supply
Max Power
Color Temperature
100% Light Brightness(LUX,1M)
CRI ≈
TLCI ≈
Light Brightness Range
Operation Temperature
Channel
Group
Dimension (not included a
standard reflector)
Net Weight
SL150II
AC100V-240V (50/60Hz)
150W
5600±200K
≈58000
96
97
10%-100%
-10°C ~ 40°C
32
16(A, B, C, D, E, F, 0-9)
34x20x16cm
2.95Kg
SL200II
200W
≈74000
36.7x20x16cm
3.33Kg
Technical Data
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
()
()
()
12
3
12
0755-29609320-8062
Warranty
Dear customers, as this warranty card is an important certificate to apply for our
maintenance service, please fill in the following form in coordination with the seller
and safe-keep it. Thank you!
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance lnformation
(see below for further information). Other products or accessories (e.g. promotional
items, giveaways and additional accessories attached, etc.) are not included in this
warranty scope.
Warranty Period
The warranty period of products and accessories is implemented according to the
relevant Product Maintenance lnformation. The warranty period is calculated from the
day(purchase date) when the product is bought for the first time, And the purchase date
is considered as the date registered on the warranty card when buying the product.
Product
Information
Model Product Code Number
Name Contact Number
Address
Customer
Information
Seller
Information
Note:
Name
Contact Number
Address
Date of Sale
If maintenance service is needed, you can directly contact the product distributor or
authorized service institutions. You can also contact the Godox after-sale service call
and we will offer you service. When applying for maintenance service, you should
provide valid warranty card. If you cannot provide valid warranty card, we may offer you
maintenance service once confirmed that the product or accessory is involved in the
maintenance scope, but that shall not be considered as our obligation.
The guarantee and service offered by this document are not applicable in the following
cases: . The product or accessory has expired its warranty period; . Breakage or
damage caused by inappropriate usage, maintenance or preservation, such as improper
packing, improper usage, improper plugging in/out external equipment, falling off or
squeezing by external force, contacting or exposing to the improper temperature,
solvent, acid, base, flooding and damp environments, etc; . Breakage or damage
caused by non-authorized institution or staff in the process of installation, maintenance,
alternation, addition and detachment; . The original identifying information of product
or accessory is modified, alternated, or removed; . No valid warranty card; .
Breakage or damage caused by using illegally authorized, nonstandard or non-public
released software; . Breakage or damage caused by force majeure or accident; .
Breakage or damage that could not be attributed to the product itself. Once met these
situations above, you should seek solutions from the related responsible parties and
Godox assumes no responsibility. The damage caused by parts, accessories and
software that beyond the warranty period or scope is not included in our maintenance
scope. The normal discoloration, abrasion and consumption are not the breakage within
the maintenance scope.
How to Get the Maintenance Service
Inapplicable Cases
Godox After-sale Service Call 0755-29609320-8062
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the
following Product Maintenance Information:
Product
Type
Parts
Other Items
Name
Circuit Board
Battery
Electrical parts e.g.battery
charger, power cord, sync cable,
etc.
Flash tube, modeling lamp, lamp
body, lamp cover, lockingdevice,
package, etc.
Maintenance
Period(month)
12
3
12
No
Warranty Service
Type
Customer sends
the product to
designated site
Without warranty
Customer sends
the product to
designated site
Customer sends
the product to
designated site
Other manuals for SL Series
7
This manual suits for next models
2
Table of contents
Other Godox Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands
CREE LIGHTING
CREE LIGHTING ZR Series installation instructions
Cheyenne
Cheyenne SOL NOVA UNLIMITED 3.5 Instructions for use
Universal Laser Systems
Universal Laser Systems US1301 Series installation instructions
Lutron Electronics
Lutron Electronics CTCL-153PDH-WH owner's manual
Beamz
Beamz SparkleWall LED96 RGBW 3x2mtr instruction manual
obsta
obsta OBSTAFLASH Led Installation and operation guide
