GP ReCyko+ GPAR05 User manual

PRODUCT SPECIFICATION
GP ReCyko+ Fast Charger
Model: GPAR05
Revision History
Revision Date Initiator Reason for Change
00 22 Dec 06 Mei Fung New release
01 9 Feb 07 Julie Cheng Re. On ‘Operating Temperature’
02 2 Apr 07 Julie Cheng Deleted note
03 28 May 07 Ivy So Rev. on ‘Special Feature’&Approval’
04 7 May 08 Gladys Chan Rev. on ‘Charge Indicator’ and
‘Approval’
Prepared By Approved By
Gladys Chan Keness Wong
Date: 7 May 08 Date: 7 May 08
GPI International Limited
Gold Peak Building, 8/F, 30 Kwai Wing Road,
Kwai Chung, New Territories, Hong Kong.
Tel: [phone] Fax: [phone]
Email: [email protected]
Website: http://www.gpbatteries.com
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
Downloaded from Elcodis.com electronic components distributor

Product Specification
Product Name :GP ReCyko+2hr Fast Charger
Description :2-4 Hrs Battery Charger with AC Plug Cord
Special Feature :Battery Ejector & Easy Check 3-Color LED Icons
Input Voltage :AC100-240V 50/60Hz (GS/BS)
AC100-120V 60Hz (UL)
Output Voltage :DC1.6V
Application :For charging 1 to 4 pcs of NiMH AA & AAA batteries
Charging Current :
Charging Time :
Termination Methods :-∆V: 0-5mV, Temperature Cutoff: 50˚C (±10°C)
Safety Timer: 190 mins. (1-2 AA/AAA), 400 mins (3-4 AA/AAA)
MTBF :30000 hours (at Ambient Temperature 25˚C)
Operating Temperature :5˚C to 45˚C
Storage Temperature :-25˚C to 60˚C
Model No.: GPAR05
12060I06448
Unit:mm
Member
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
32.0
1
16
.0
72.5
Charging Current (mA) Trickle Charge Current (mA)
AA (pcs) AAA (pcs) AA (pcs) AAA (pcs)
1-2 3 4 1-2 3 4 1-4 1-4
1150 766 575 475 317 237.5 102.5 42.5
1100 733 550 475 317 237.5 98 42.5
GS
BS
AC100-240V
50/60Hz
UL
AC100-120V
60Hz
DC1.6V
Input Output
Plug
Type
Battery Typical Charging Time (mins)
Capacity 1-2 pcs 3 pcs 4 pcs
AA 2050mAh ~ 110 ~ 170 ~ 225
AAA 820mAh ~ 115 ~ 170 ~ 225
Downloaded from Elcodis.com electronic components distributor

Product Specification
Charge Indicator :
Dimensions :116 (L) X 72.5 (W) X 32 (H)mm
Approval :AR05GS -GS, CE
AR05BS -CE
AR05US -UL
AR05PSE -PSE
Warranty Period :12 months from ex-factory date.
Model No.: GPAR05
12060I06448
Member
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
• Green power LED on
• Orange battery icon slow pulsing
• Orange battery icon fast blinking
• Orange battery icon solid on
Condition Indication
• Power connected
• GP ReCyko+battery inserted in charger and charging
in progress
• Wrong / damaged battery inserted
• When charging is finished and then switch to trickle
charge.
* Remarks:
- GP ReCyko+batteries do not require a recharge prior to first use.They are charged before shipped.
-GP ReCyko+batteries come with good capacity retention. Remove the batteries and unplug the charger once the
charging is complete. Do not leave batteries in the charger for extended periods. Always unplug the charger when
it is not in use.
Downloaded from Elcodis.com electronic components distributor

wi
thBa
t
te
ry
E
jec
to
r
2
Hrs
*
1206I06033
-Compact charger with AC cord
-Charge 1 to 4 AA or AAA GP ReCyko+ batteries
-Equipped with 4 individual charging channels
-Termination methods:
- Individual minus delta voltage (-dV)
- Individual temperature sensor
- Individual safety timer
-Over-temperature protection
-Primary and damaged batteries detection
-Easy check LED icons
-Battery ejector
Charger Features
Caution
1. Charge GP Nickel Metal Hydride (NiMH) batteries only. Do not
charge non-rechargeable batteries.
2. Do not charge other types of batteries, such as alkaline, carbon
zinc, lithium, rechargeable alkaline or any other unspecified
batteries, as they may leak or burst, causing personal injury and
damage.
3. Never use an extension cord or any attachment not recommended
by GP, as this may lead to a risk of fire, electric shock or personal
injury.
4. Unplug the charger from the outlet before attempting to clean
or when not in use.
5. Do not short circuit batteries.
6. Do not wet, incinerate or disassemble the charger and batteries.
7. For indoor and dry location use only. Do not expose the charger
to rain, snow or extreme conditions.
GPI International Ltd.
Gold Peak Building, 8/F., 30 Kwai Wing Road,
Kwai Chung, N.T., Hong Kong
Battery Icon Power LED
Battery Ejector
Attention
1. It is normal for batteries to become warm during charging and
they will gradually cool down to room temperature after being
fully charged.
2. For best result, use GP ReCyko+ Charger at room temperature
with good ventilation.
3. Charging time may vary based on different battery capacities.
(Refer to the Charging Time Table)
4. Remove batteries from an electrical device if it will not be used
for a long time.
5. If the performance of the batteries decreases substantially, it is
time to replace the batteries.
6. The batteries should be removed from the charger before they
are scrapped and disposed of properly.
7. If the supply cord is damaged, it must be replaced by a special
cord or assembly available from the manufacturer or its service
agent to avoid a hazard.
Charging Instructions
1. Charge 1 to 4 AA or AAA GP ReCyko+ batteries in any combination.
Each charging slot can only charge 1 battery (either AA or AAA).
2. Connect the provided AC cord with the charger and plug it into
the power source (Fig.1). OR connect GP DC 12V car adaptor
to the charger and plug it into the cigarette lighter jack (Fig.2).
DC car adaptor is only included in select models.
3. Power LED will light up when power is connected.
4. Insert AA or AAA GP ReCyko+ batteries into the charging slots
according to the polarity indications (+/-). Different contact plates for
AA and AAA GP ReCyko+batteries are set in the outer and inner part of
the charging slots respectively. (Fig.3) When inserting AAA
batteries into the charging slots, slant the batteries to ensure smooth
contact with the plates. (Fig.4)
5. Battery Icon will pulse slowly when charging is in process.
6. If alkaline, carbon zinc, lithium, rechargeable alkaline or damaged
batteries are mistakenly inserted into the charging slots, the
corresponding Battery Icon will blink fastly and the charger will
stop charging. All other Battery Icons will turn off.
7. If the charger does not work properly, all Battery Icons will turn off.
The Power LED will blink. The charger will stop charging.
8. Battery Icon will be solid on when battery is fully charged and
in trickle charge mode.
9. Once charging is complete, unplug the charger from the power
source and remove the batteries with the battery ejector (Fig.5).
Charging Time
GP ReCyko+
Instruction Manual
Charging Current (mA) Trickle Charge
Current (mA)
Model Input Output
AA AAA AA AAA
1-2 3 4 1-2 3 4 1-4 1-4
pcs pcs pcs pcs pcs pcs pcs pcs
Specifications
GP AR05GS
GP AR05BS
AC100-240V
50/60Hz
or DC 12V 1150 766 575 475 317 237.5 102.5 42.5
GP AR05US AC100-120V
60Hz
DC1.6V
1100 733 550 475 317 237.5 98 42.5
LED Indications (Refer to Fig. 6)
• Power connected
• GP ReCyko+battery inserted in
charger and charging in progress
• Wrong / damaged battery
inserted
• Full charge or trickle charge
Condition Indication
• Green power LED on
• Orange battery icon slow pulsing
• Orange battery icon fast blinking
• Orange battery icon solid on
For best performance and optimal safety, charge GP
ReCyko+batteries with GP ReCyko+ Charger/ GP
PowerBank
Fig. 1
Fig. 2
Fig. 5
Fig. 3
Fig. 6
Read the instruction manual thoroughly before use.
Keep the manual for future reference.
Type Size Typical Charging Time (mins)
Capacity 1-2 pcs 3 pcs 4 pcs
AA 2050mAh 110 170 225
AAA 820mAh 115 170 225
Fig. 4
GB
DC Car
Adaptor
Downloaded from Elcodis.com electronic components distributor