Grandstream Networks GXV3275 User manual

GXV3275 LDAP User Guide
Grandstream Networks, Inc.
GXV3275 IP Multimedia Phone for AndroidTM
LDAP User Guide

GXV3275 LDAP User Guide
Page 1 of 22
GXV3275 LDAP User Guide
Index
INTRODUCTION ........................................................................................... 3
REQUIREMENT ............................................................................................ 4
LDAP CONFIGURATION ON GXV3275 ...................................................... 5
CONFIGURE LDAP VIAWEB UI......................................................................................................... 5
CONFIGURE LDAP VIA LCD ..............................................................................................................8
CONFIGURE LDAP VIA CONFIGURATION FILE .............................................................................12
USE GXV3275 LDAP BOOK...................................................................... 14
SEARCH CONTACTS IN LDAP BOOK .............................................................................................14
ADD LDAP CONTACTS TO LOCAL PHONEBOOK.......................................................................... 16
USE LDAP WITH UCM6100 SERIES IPPBX ............................................ 19
UCM6100 SERIES IPPBX LDAP SERVER.......................................................................................19
GXV3275 LDAP CONFIGURATION FOR UCM6100 DEFAULT LDAP PHONEBOOK...................... 20

GXV3275 LDAP User Guide
Page 2 of 22
Table of Figures
GXV3275 LDAP User Guide
Figure 1: GXV3275 Web UI LDAP Settings ................................................................................................8
Figure 2: GXV240 Idle Screen....................................................................................................................9
Figure 3: GXV3275 Menu .........................................................................................................................10
Figure 4: GXV3275 LDAP Book - Settings................................................................................................10
Figure 5: GXV3275 LDAP Settings via LCD ..............................................................................................11
Figure 6: GXV3275 LDAP Settings - Configure Server Address...............................................................12
Figure 7: GXV3275 Idle Screen................................................................................................................ 14
Figure 8: GXV3275 Menu .........................................................................................................................15
Figure 9: GXV3275 LDAP Book - Search ................................................................................................. 15
Figure 10: GXV3275 LDAP Book - Search Result....................................................................................16
Figure 11: GXV3275 LDAP Book - Add Single LDAP Contact to Local Phonebook.................................. 17
Figure 12: GXV3275 LDAP Book - Add Multiple LDAP Contacts to Local Phonebook .............................18
Figure 13: UCM6100 LDAP Server...........................................................................................................19
Figure 14: UCM6100 LDAP Phonebook ................................................................................................... 20
Figure 15: UCM6100 LDAP Default Phonebook Entries...........................................................................20
Figure 16: Configure GXV3275 LDAP with UCM6100 LDAP Default Phonebook .................................... 21
Figure 17: LDAP Client Configuration Sample from UCM6100.................................................................22

GXV3275 LDAP User Guide
Page 3 of 22
INTRODUCTION
LDAP (Lightweight Directory Access Protocol) is an industry standard application for accessing and
maintaining a distributed directory information via the Internet Protocol network. LDAP is specified in a
series of RFCs (Request for Comments) from IETF (Internet Engineering Task Force).
LDAP is a client-server protocol and the GXV3275 can be used as LDAP client to access the directory
and search contacts remotely from the LDAP server. This User Guide describes how to use the LDAP
directory on the GXV3275 and a sample configuration is provided with the built-in LDAP server on the
Grandstream UCM6100 series IPPBX. The audience are administrators or who maintains the GXV3275
configurations. It is expected that the audience are familiar with basic knowledge of LDAP and tasks
involved with configuring LDAP client.
To learn more about GXV3275's basic functions and advanced features, please visit link
http://www.grandstream.com/support to download the latest "GXV3275 User Guide" and "GXV3275
Administration Guide".

GXV3275 LDAP User Guide
Page 4 of 22
REQUIREMENT
The following equipment and services are required in order to use the GXV3275 LDAP directory:
A properly installed and configured LDAP server
The LDAP configuration on the GXV3275 relies on the LDAP server setup in order to retrieve the
stored contacts information. Therefore, before starting using the LDAP directory on the GXV3275,
please make sure the LDAP server is properly installed and configured.
LDAP is an open and vendor-neutral standard. There are different LDAP servers that users can
choose to install to host the cooperate directory. For example, OpenLDAP is commonly used on
Linux operating system and it can be downloaded here: http://www.openldap.org/software/download/.
OpenLDAP software for Windows operating system can also be found online with easy setup wizard.
Besides OpenLDAP, the GXV3275 LDAP client works with Microsoft Active Directory server as well.
The system administrators could choose the LDAP server to install based on the business needs and
preference.
GXV3275 with firmware version 1.0.1.20 or higher
Please visit http://www.grandstream.com/support/firmware to download the latest GXV3275 firmware
and release note.
Functional network environment where the GXV3275 and the LDAP server are connected.
The LDAP server can be located on the Internet or corporate intranet and the LDAP protocol runs
over TCP/IP. Therefore, please keep the network access working between the GXV3275 and the
LDAP server for the GXV3275 to retrieve information from the server.

GXV3275 LDAP User Guide
Page 5 of 22
LDAP CONFIGURATION ON GXV3275
In the LDAP server, the information is stored as "entry" which is a collection of attributes under a globally-
unique DN. The LDAP client needs to be properly configured to access the LDAP server, perform search
within the DN and retrieve the result. On the GXV3275, LDAP configurations can be done via web UI,
LCD or configuration file provisioning. This section describes how to configure LDAP settings on the
GXV3275 via these three methods.
CONFIGURE LDAP VIA WEB UI
1. Log in the GXV3275 web UI from your computer's web browser as administrator or end user.
2. Navigate to Maintenance->LDAP Book page.
3. Fill out the LDAP server address, attributes and filter information. See [Table 1: LDAP Configuration
Options] below for detailed information of each option.
4. Once the configuration is done, click on "Save" on the bottom of the page.
Table 1: LDAP Configuration Options
Option
Description
Example
Server
Address
Configure the IP address or domain name of
the LDAP server.
mycompany.ldap.server.com
192.168.0.44
Port
Configure the LDAP server port. The default
LDAP server port number is 389.
389
Base DN
Base DN refers to the location in the
directory where the search is requested to
begin. The LDAP search will be performed
within this directory.
dc=grandstream,dc=com
ou=Boston,dc=grandstream,dc=com
User Name
Enter the login "Username" to access and
query the LDAP server. Some LDAP servers
allow anonymous binds in which case this
setting can be left blank.
cn=manager,dc=grandstream,dc=com
Password
Enter the login "Password" for the username
to access and query the LDAP server. Some
LDAP servers allow anonymous binds in
which case this setting can be left blank.
secret

GXV3275 LDAP User Guide
Page 6 of 22
LDAP
Name
Attributes
Specify the "name" attributes of each record
which are returned in the LDAP search
result. This field allows users to configure
multiple name attributes separated by space.
cn sn
CallerIDName FirstName LastName
LDAP
Number
Attributes
Specify the "number" attributes of each
record which are returned in the LDAP
search result. It allows the users to configure
multiple number attributes separated by
space.
telephoneNumber
telephoneNumber Mobile sipAccount
LDAP Mail
Attributes
Specify the "mail" attributes of each record
which are returned in the LDAP search
result.
mail
LDAP
Name Filter
This is the filter used for name lookups.
Special characters:
* - Any characters
% - The entered string is used as prefix
(|(cn=%)(sn=%))
This returns all the records which
have the "cn" or "sn" field starting with
the entered searching key words.
(&(cn=%) (telephoneNumber=*))
This returns all the records with the
"cn" field starting with the entered
searching key words and
"telephoneNumber" field set.
(!(sn=%))
This returns all the records which do
not have the "sn" field starting with
the entered searching key words.
(CallerIDName=%)
This returns all the records which
have the "CallerIDName" field starting
with the entered searching key words.
LDAP
Number
Filter
This is the filter used for number lookups.
Special characters:
* - Any characters
% - The entered string is used as prefix
(|(telephoneNumber=%)(Mobile=%)
This returns all the records which
have the "telephoneNumber" or
"Mobile" field starting with the entered
searching number.
(&(telephoneNumber=%) (Mobile=*))
This returns all the records which
have the "telephoneNumber" field
starting with the entered searching
number and "Mobile" field set.
(sipAccount=%)
This returns all the records which
have the "sipAccount" field starting
with the entered searching number.

GXV3275 LDAP User Guide
Page 7 of 22
LDAP Mail
Filter
This is the filter used for mail lookups.
(mail=%)
This returns all the records which
have the "mail" field starting with the
entered searching key words.
LDAP
Display
Name
Attributes
This is the display name of the entry to be
shown on the phone's LCD.
%cn %sn
%CallerIDName
Max Hits
Specify the maximum number of results to be
returned by the LDAP server. The valid range
is between 1 and 4000. The default setting is
50.
Note:
If large amount of searching result is to be
returned, the searching time in the LDAP
server might take long.
50
Search
Timeout
(ms)
Specify the interval (in ms) for the server to
process the request and the client will wait
for the server to return the result. The valid
range is 1 to 4000.
1000
LDAP
Lookup For
Dial
If enabled, the phone will perform LDAP
lookup for the dialed number when dialing
out. The default setting is disabled.
Enable
Disable
LDAP
Lookup For
Incoming
Call
If enabled, the phone will perform LDAP
lookup for the incoming call's number when
receiving calls. The default setting is
disabled.
Enable
Disable
[Figure 1: GXV3275 Web UI LDAP Settings] shows the GXV3275 web UI LDAP settings web page, with all
the options set to default value.

GXV3275 LDAP User Guide
Page 8 of 22
Figure 1: GXV3275 Web UI LDAP Settings
CONFIGURE LDAP VIA LCD
1. On the GXV3275 idle screen, tap on onscreen menu icon to access the application list.

GXV3275 LDAP User Guide
Page 9 of 22
Figure 2: GXV240 Idle Screen
2. In the menu, tap on "LDAP Book" icon to launch LDAP Book application.