Great Little Trading Abbeville L3952 User manual

1
Abbeville Storage - Small Shelf Unit
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
02/11/2018
V1
easy - medium - hard
Assembly Difculty
one-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
Good luck!

2
Safety Warnings:
• Adult assembly required, assemble and use on a at surface.
• CHOKING HAZARD - This product contains small parts and must be
assembled by an adult. special care must be taken in the unpacking and
assembly of this item as unassembled parts may be a choking hazard to
children under 3 years old.
• During assembly, children should be kept away from the product due
to possible risk of injury.
• Do not use power tools in the construction of this product.
• This product is heavy, so we recommend you build it where you are
planning to use it.
• All assembly fastenings should be tightened properly and periodically
checked; care should be taken that no ttings are loose.
• Serious or fatal crushing injuries can occur from furniture tipping over.
Ensure you secure this furniture product to the wall before you use it
using the kit provided. If you have not received an anti tip kit with your
product please contact Customer Services.
• Keep all relevant information for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean only.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [email protected]
Thank you.

3
Component Check List
A B
Component Check List
#1 #2
#3 #4
You will need (not supplied)
C D
#5
Philips Head Screwdriver
EF
G H 1x Allen Key
x1 RH Side Panel x1 LH Side Panel
x1 Shelf Panel x1 Divider Panel
x1 Top Panel x1 Base Panel
x1 Lower Back Panel x1 Upper Back Panel
#6
#7
16x Wooden Dowels
20mmL
10x Cam Dowels
35mmL
10 x Cam Locks
14mm Diameter
12 x Screws
12mmL
6 x Bolts
42mmL
6 x Barrel Nuts
9mm Diameter

4
Hardware for Step 1:
2x #1 Wooden Dowels
STEP 2:
Insert x2 wooden dowels (#1), and x2 cam dowels (#2)
to side panel (B).
STEP 3:
Slot side panel (B) to shelf panel (C ), ensuring that the
smaller hardware holes are at the base end, and that the
ledged side is facing down. Secure panel (B) with x2 cam
locks (#3).
Hardware for Step 3:
2x #3 Cam Locks
STEP 1:
Insert x2 wooden dowels (#1), and x2 cam dowels (#2) to shelf panel (C). Slot
divider panel (D) to the xed hardware, ensuring the side with the hardware holes
is facing down and secure with x2 cam locks (#3).
D
C
#1
#2
#2
x2
2x #2 Cam Dowels
#2
#2 #1
B
x2
Hardware for Step 2:
2x #1 Wooden Dowels
2x #2 Cam Dowels
B
CD
#3
#3
Note:
Do not use power tools.
Turn each of the cam locks
(#3) clockwise to lock them.
#3
#3
2x #3 Cam Locks TOP
BASE

5
STEP 4:
Insert x2 wooden dowels (#1), and x2 cam dowels (#2) to side panel (A).
STEP 6:
Attach the base panel (F) to the unit using x6 wooden dowels (#1), x 6 bolts (#5)
and x6 barrel nuts (#6) as shown, ensuring the ledged side of panel (E) is facing
downwards.Tighten the bolts using the allen key provided.
STEP 5:
Slot side panel (A) to shelf panel (C ), ensuring that the smaller hardware holes are at
the base end, and that the ledged side is facing down. Secure panel (A) with x2 cam
locks (#3).
A
#2
#2 #1
x2
Hardware for Step 4:
2x #1 Wooden Dowels
2x #2 Cam Dowels
B
D
A
C
#3
#3 x2
Hardware for Step 5:
2x #3 Cam Locks
B
D
A
F
#5
#5
#5
#5
#5
#5
#6
#6
#1
#1
#1
x2
#6 x2
#6 x2
x2
x2
x2
Hardware for Step 6:
6x #1 Wooden Dowels
6x #6 Barrel Nuts
6x #5 Bolts 42mmL
TOP
BASE

6
STEP 7:
Insert x4 wooden dowels (#1), and x4 cam dowels (#2) to top panel (E).
STEP 9:
Carefully turn over the unit and attach the back panels (G &H) using x12 screws (#4).
Please note that the 2x pilot holes indicated at the top of the unit are to attach anti-
tip straps included separately with this item.
STEP 8:
Position top panel (E) onto the unit. Once in place, insert x4 cam locks (#3) into the
larger hardware holes and turn clockwise to secure the top panel in place. Ensure that
the ledged side of panel (E) is facing downwards.
Hardware for Step 9:
12x #4 Screws 12mmL
Copyright© 2012 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Hardware for Step 7:
4x #1 Wooden Dowels
4x #2 Cam Dowels
Hardware for Step 8:
4x #3 Cam Locks
E
#2
#2
#2
#2
x2
#1
#1
x2
#3
#3
#3
#3
G
H
#4
#4
#4
#4
#4
#4
#4
#4
#4
#4
E
x2
Your unit is ready to use.
Attach the anti tip straps to the back of the unit using the remaining drill holes. For
details on securing the unit to the wall see the anti-tip kit guidance.