Great Little Trading L5245 User manual

1
Crompton Tall Bookcase
11/05/2021
V1
one-person job
Assembly Difculty
easy - medium - hard
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a choking
hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• To avoid possible injury from tipping, DO NOT allow children to climb
on the product.
• WARNING! FURNITURE TIPPING RISK. Serious or fatal crushing
injuries can occur from furniture tipping over. Ensure you secure this
furniture product to the wall before you use it, using the kit provided.
• If you have not received an anti-tip kit with your product please contact
Customer services.
• Wall xings not included. Please use appropriate xings that are suitable
for the wall type. If in doubt, please seek professional advice.
• Check all xtures and ttings regularly and tighten as necessary.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
are properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
E F
G H
I J
1x Side Panel 1x Side Panel
2x Fixed Shelf Panels
2x Batons
2x Adjustable Shelf Panels 1x Lower Back Panel
#1 #2
#3 #4
#5 #6
#7
#9
#8
12x Cam Dowels 20x Wooden Dowels
1x Anti-tip Kit
You will need
(not supplied)
Philips Head Screwdriver
1x Base Panel
1x Top Panel
1x Top Back Panel
Component Check List Hardware Check List
1x Mid Back Panel
12x Cam Locks 4x Cross-Head Bolts
4x Barrel Nuts 2x Screws
(25mm)
30x Screws
(14mm)
8x Shelf Pegs

4
STEP 2:
Note: You will be building this unit with the back
facing up.
Position side panel B as shown with the recessed long
edge with drill holes facing up.
Insert 4x wooden dowels (#2) into the holes next to
the cam dowels of panel B and position the 2x shelves
(C) to the side panel as shown. Please note the holes
on the underside of the shelves should be facing down
as shown, towards the smaller drill holes on the side
panel.
To secure the shelves in position, insert 4x cam locks
(#3) into the large drill holes on the shelves and turn
them clockwise to lock.
Hardware for Step 1: Hardware for Step 2:
8x #1 Cam Dowels
4x #3 Cam Locks
STEP 1:
Working on a protective surface like a carpet or a rug, position both side
panels A & B with drill holes facing up.
Using a Philips screwdriver, insert 4x cam dowels (#1) into the holes as
shown in BOTH panels.
4x #2 Wooden Dowels
Using Cam Locks:
When inserting into the panel, ensure
that each cam lock’s arrow is pointing
towards the drill hole on the side edge
of the panel & the dowel that it will be
receiving.
When the panels are in the connected
position, using a screwdriver, turn the
cam lock in a clockwise direction to
lock and secure.
#1
#1
#1
#1
A
C
C
B
B
#3
#2
#2
#2
#3
#3
#3
#3
TOP
*Note the
larger drill
holes on side
panels.
BASE
*Note the
smaller drill
holes on side
panels.
#2
#1
#1
*Note: Panel C:
Ensure the long
edge with the small
drill holes on are
facing up.
Ensure the large
drill holes are
facing to the base.

5
STEP 3:
Position the remaining side panel A with the
recessed long edge with drill holes facing
up and attach to the 2x shelves (C) as in
step 2, using 4x wooden dowels (#2) and
4x cam locks (#3). Ensure the cam locks are
tightened securely by turning clockwise.
C
C
A
B
#3
#3
#3
#3
#3
#3
#2
#2
#2
#2
#2
Hardware for Step 4:
4x #2 Wooden Dowels
4x #4 Cross-head Bolts
4x #5 Barrel Nuts
STEP 4:
Attach the base panel to the unit.
Insert 4x wooden dowels (#2) to the outer holes in
the ends of the side panels as shown. Insert 4x barrel
nuts (#5) to the holes on the inside of the side panels,
ensuring the hole in the nut is facing towards the
base.
Position the base panel with the recessed edge facing
up and push into position. Fix in place using 4x
crosshead bolts (#4) through the base into the side
panels. Fully tighten using a Philips screwdriver.
B
#2
#5
#4
#4
#4
#4
C
C
D
Hardware for Step 3:
4x #3 Cam Locks
4x #2 Wooden Dowels
A
#5
#5 #2
#2
#2
#5
TOP
BASE
#2

6
STEP 5:
Attach the 2x batons (E) on each side of the base panel.
Insert 2x wooden dowels (#2) into the holes next to the feet. Push the baton
into position and x in place with 1x screw (#6). Repeat on remaining side.
Hardware for Step 5:
4x #2 Wood Dowels
2x #6 Screws
Hardware for Step 6:
4x #1 Cam Dowels
STEP 6:
Prepare the top panel (F) inserting 4x cam dowels (#1) as shown.
STEP 7:
Insert 4x wooden dowels (#2) into the inner holes on the top panel (F)
then position onto the unit with the recessed edge facing up. Once in
place, insert 4x cam locks (#3) into the larger holes on the side panels and
turn clockwise to secure the top panel in place.
Hardware for Step 7:
4x #3 Cam Locks
4x #2 Wooden Dowels
B
C
D
A
F
B
C
C
C
A
F
#6
#6
#2
#2
#1
#1
#1
E
E
#2
#2
#2
#2
#2
#3
#3
#3
#2
#3
#3
#1

7
Hardware for Step 9:
8x #8 Shelf Pegs
G
J
J
#8
STEP 8:
Attach the back panels.
Position the lower, mid and back panels I, H and
G with the tongue and groove facing the inside
of the unit. Check the alignment of the holes
with the panels and the unit and using your
Philips screwdriver, x the panels in place with
x30 screws (#7).
Please note that the 2x pilot holes indicated at
the top of the unit are to attach anti-tip straps
included separately with this item.
Hardware for Step 8:
30x #7 Screws (14mm)
STEP 9:
Stand the unit up on its base and prepare to
insert the 2x adjustable shelves (J).
Insert 4x shelf pegs (#8) into the holes on the
inside of the spaces you wish to shelve.Then
place the shelf on top of the pegs. Repeat for the
second shelf.
H
A
I
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7 #7
#7
#7
#7
#7
#7
#7 #7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#7
#8
#8
#8
#8
#8
#8
#8
#8
Please note: These arrows indicate the drill
holes used for the anti-tip kit brackets & hardware
included in with your unit. Do not use #7 in these
holes.

8
Copyright© 2021 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Hardware for Step 10:
1x #9 Anti-tip Kit
#9
#9
G
H
I
STEP 10:
We strongly recommend that you attach this unit
to the wall to prevent injury from the unit tipping
over.
Attach the 2x anti-tip brackets to your unit using
the hardware and instructions included in kit
provided with your unit. Please use the screw
holes shown.
Your unit is now ready to be attached to the wall
using hardware that is suitable for the walls in
your home.
Your product is now ready to use