Great Little Trading Marshmallow Kitchen User manual

1
Marshmallow Kitchen
03/05/2019
V1
easy - medium - hard
Assembly Difculty
one-person job
L4724
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete, just
in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Adult assembly required.
• Assemble and use on a at and level surface.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Not suitable for children under 3 years due to small parts that may
become detached and present a choking hazard.
• Check all xtures and ttings regularly and tighten as necessary.
• Check the item regularly for signs of damage which may make the
product unsafe.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A
1x Left Side panel 1x Right Side Panel 1x Front Base Panel
1x Back Base Panel 1x Base Panel 2x Towel Rail Brackets
B C
D E F
1x Towel Rail 1x Oven Shelf
1x Dishwasher Shelf 1x Centre Back Panel
G H1 I
J K L
2x Back Left + Right Panel
1x Right Top Side Panel 1x Microwave Left Panel
ST U
1x Microwave Right Panel
magnet
1x Cooker Panel 1x Oven Door 1x Washing Machine Panel
M N O
1x Microwave Panel 1x Microwave Control
Panel
VW X
1x Top Cupboard Door
1x Shelf Panel 1x Worktop
YZ a
1 x Ta p
1x Microwave Top Panel 1x Cupboard Top Panel
bc d
1x Clock
1x Top Backboard 1x Sink
ef
#1 You will need
(not supplied)
Phillips Head Screwdriver
1x Washing Machine Door 1x Dishwasher Door 1x Left Top Side Panel
P Q R
H2
1x Centre Left Panel 1x Centre Right Panel
#2
2x Screws
12mmL
74x Screws
25mmL
1x Anti-Tip Strap

4
STEP 1:
Attach panels (A), (B), (C) and (D) together using
8 x screws (#1).
Hardware for Step 1:
8x #1 25 mmL screws
STEP 2:
Attach the base panel (E) and secure using 8 x
screws (#1).
Hardware for Step 2:
8x #1 25 mmL screws
Hardware for Step 3:
8 x #1 25 mmL screws
STEP 3:
Insert towel rail (G) into the towel
rail brackets (F). Attach assembled
rail to panel B using 4 x screws (#1).
STEP 4:
Slide in back panels 2 x (L) and (K) and insert
shelves (I) and (J)
A
D
C
B
E
H1
H2
G
F
F
L
K
L
J
I
Attach panels (H1) and (H2) to the base assembly
using 4 x screws (#1).
B

5
Hardware for Step 5:
8x #1 25 mmL screws
Hardware for Step 7:
5x #1 25 mmL screws
Hardware for Step 8:
4x #1 25 mmL screws
STEP 5:
Position both oven door (N) and washing machine door (P) then secure both the
cooker panel (M) and washing machine panel (O) using 8 x screws (#1).
STEP 6:
Position dishwasher door (Q) into place.
STEP 7:
Attach left and right top side panels (R) and (S) to
the worktop (Z) using 4 x screws (#1).
Then attach tap (a) using 1 x screws (#1).
STEP 8:
Attach microwave sides (T) and (U) to the shelf panel (Y).
Ensure the magnet on panel U faces forwards.
M
N
P
O
Q
R
S
Z
a
YT
U

6
Hardware for Step 9:
4x #1 25 mmL screws
Hardware for Step 11:
8x #1 25 mmL screws
Hardware for Step 12:
13x #1 25 mmL screws
Hardware for Step 10:
8x #1 25 mmL screws
STEP 9:
Attach the shelf panel (Y) to side panels (R) and (S) using 4 x screws (#1).
Then slide components (V), (W) and (X) into position shown above.
STEP 10:
Attach the microwave top panel (b) and cupboard
top panel (c) using 8 x screws (#1).
STEP 11:
Attach the top assembly to the base unit
using 8 x screws (#1).
STEP 12:
Add the clock (d) to the back panel
(e) using 2 x screws (#2).
Attach the back panel (e) to the unit
using 13 x screws (#1).
When attaching the left centre
screw also secure the anti-tip strap
V
W
X
b
c
e
Y
2x #2 12 mmL screws
Copyright© 2016 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
d
#2
#2
R
S
The strap should now be attached to the
wall using hardware that is suitable for the
walls in your home (not provided).
left centre
screw, insert
anti-tip strap
through screw
then screw
through panel e
to unit