Great Little Trading Star Bright User manual

1
Star Bright Single Bed
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
23/06/2020
V3
easy - medium - hard
Assembly Difculty
two-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
www.gltc.co.uk
www.gltc.co.uk

2
Safety Warnings:
• This bed conforms to BS8509:2008 +A1:2011
• WARNING. Not suitable for children under 4 years.
• This bed is suitable for mattress size 190cmL x 90cmW with a
minimum height of 15cm.
• Adult assembly required.
• This product is heavy, we recommend that you build it where you are
planning to use it.
• Assemble and use on a at and level surface.
• Do not use power tools in the construction of this product.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• WARNING. Do not place this bed near heat sources, windows or
other furniture.
• Children are likely to play, bounce, jump and climb on beds, therefore
for your child’s safety, this bed should either be placed tight against the
wall or have a minimum gap of 30cm between the wall and the side of
the bed.
• Check xtures and ttings regularly and tighten as necessary.
• This bed can be dismantled for storage or transportation.
• WARNING. Do not use this bed if any part becomes broken, torn or
missing. Please contact GLTC Customer Services on 0344 848 6000
immediately to arrange for suitable replacement parts.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Please ensure the room in which this bed is to be used is well
ventilated or aired regularly in order to keep humidity low in and
around the bed.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you
IMPORTANT
READ CAREFULLY - KEEP FOR
FUTURE REFERENCE.

3
2x Phillips Head Screwdrivers
Component Check List
A
2x Side Rails
Component Check List
12x Bolts
32mmL
8x Bolts
85mmL
#1 #2
#3
#5
#4
#6
8x Barrel Nuts
1x Allen Key
4x Wooden Dowels
25mmL
12x Top Hat Nuts
B C
1x Set of Slats
You will need (not supplied)
1x Footboard 1x Headboard
D

4
STEP 1:
Insert 1x wooden dowel (#1) into the side rail A.
Locate the side rail A onto the footboard B with the slat support rail facing inwards
and insert 2x barrel nuts (#2) into the side rail and secure with 2x bolts (#3).
Tighten with the allen key provided.
STEP 2:
Insert 1x wooden dowel (#1) into the second side rail A.
Locate the side rail A onto the footboard B and insert 2x barrel nuts (#2) into the
side rail and secure with 2x bolts (#3).
Tighten with the allen key provided.
#1
A
2x #3 Bolts
2x #2 Barrel Nuts
#2
B
#2
B
#3
#3
#1
Hardware for Step 1:
1x #1 Wooden Dowels
#1 #2
#2
#3
#3
#1
#3
#3
#2
#2
2x #3 Bolts
2x #2 Barrel Nuts
Hardware for Step 2:
1x #1 Wooden Dowels
A
#2
#2
NOTE: Ensure the side rails are attached
the correct way up. The slat support rail
should be in the lower part of the side
rail, so there should be a larger gap above
the slat support rail than underneath it.

5
STEP 3:
TWO PEOPLE are needed for this step.
Insert 1x wooden dowel (#1) into the open end of each of the two side rails A.
With the assistance of a second person, locate each side rail A onto the headboard C.
Insert 2x barrel nuts (#2) into each of the side rails and secure with 2x bolts (#3).Tighten
with the allen key provided.
4x #3 Bolts
4x #2 Barrel Nuts
Hardware for Step 3:
2x #1 Wooden Dowels
C
#2
#2
#3
#3
#1
A
#2
#2
A
#1
#1
#3
#3
#2
#2
A

6
4
STEP 4:
Install the webbed slats D with the webbing face downwards and secure them with
12x bolts (#4) and 12x top hat nuts (#5) using two screwdrivers.
D
12x #5 Top Hat Nuts
Hardware for Step 4:
12x #4 Bolts 32mmL
Copyright© 2017 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
#4
#4
#4
#4
#4
#4
#4
#5
#5
#5
#5
#5
#5