Great Little Trading L5261 User manual

1
Stacking Craft Storage
11/04/2021
V1
one-person job
Assembly Difculty
easy - medium - hard
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
L5261

2
Safety Warnings:
• Adult assembly required.
• WARNING! Not suitable for children under 3 years due to small parts which
may become detached and present a choking hazard.
• Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury.
• DO NOT use this item if any components are
missing or damaged.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Use on a at surface only.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
are properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
E
Component Check List
x2
x2 x2
x1
x2 x1
x2
x24 x8
x2
x1 x1
x1
F
G H
I J
K
#1 #2
Hardware Check List

4
STEP 1:
Attach panel A to panel B
using 2x (#1) screws.
Hardware for Step 1:
2X #1 Screws
STEP 2:
Slide panel C on
grooves on panels A & B,
assembled in Step 1.
B
A
#1
#1
B
A
C
Hardware for Step 3:
2X #1 Screws
STEP 3:
Attach 2nd panel B to panel
A from step 1, using 2x (#1)
screws
STEP 4:
Attach 2nd panel A to panels
B from step 3 using 4x (#1)
screws.
Hardware for Step 4:
4X #1 Screws
C
A
B
B
C
#1
#1
#1
#1
#1
#1
A
A
B
B

5
Hardware for Step 5: STEP 5:
Attach panel D to panel E using
2x (#1) screws.
Ensure that the grooves meet up
at the bottom of each panel.
STEP 6:
Slide panel F on grooves on
panels D & E from step 5.
2X #1Screws
DE
#1
#1
F
Hardware for Step 8:
Hardware for Step 7:
4X #1 Screws
STEP 7:
Attach panel 2nd panel D to
panel E (assembled part from
step 5) using 2x (#1) screws.
2X #1 Screws
STEP 8:
Attach 2nd panel E to panels D
using 4x (#1) screws.
#1
#1
D
#1
#1
#1
#1
E

6
STEP 9:
Insert 8x (#2) wooden
dowels into panels H &G.
Join panels H &G together
using slots on each panel
STEP 10:
Attach panel I to the end of the
panel H (from step 9) using the
dowels already inserted.
Hardware for Step 9:
8X #2 Wooden Dowels
#2
#2
#2
#2
#2
#2 #2
#2
H
G
G
H
I
Hardware for Step 11:
2X #1 Screws
STEP 11:
Attach panel J to panel I using 2x (#1)
screws.
STEP 12:
Slide panel K into groove along
the bottom of panels I & J.
J
#1
#1
K

7
Hardware for Step 14:
2X #1 Screws
STEP 14:
Fix panel I using 2x
(#1) screws.
STEP 13:
Attach 2nd panel I onto
the end of panel J using
the dowels already
inserted in step 9.
I
#1
#1
4X #1 Screws
STEP 15:
Attach 2nd panel J to the other side
using 4x (#1) screws. .
Hardware for Step 15:
#1
#1
#1
#1
J
STEP 16:
Your Product is now ready to use.
Copyright© 2022 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.