Great Little Trading L5196 User manual

1
Clip on Bedside Table
L5196
25/05/2021
V2
easy - medium- hard
Assembly Difculty
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting the wood.
• WARNING:The bedside table has an open side, therefore it is not
recommended that hot drinks or breakable items are placed on this
shelf as they could easily be knocked off causing injury or damage.
• Maximum weight of shelf 10kg. Do not overload.
• Check all xtures and ttings regularly and tighten as necessary.
• Please retain these instructions for future reference.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
E F
G
1x Back Panel 1x Side Panel
1x Side Panel
1x Upstand Front Panel
2x Shelf Hooks
#1 #2
#3 #4
#6#5
6x Cam Locks 6x Cam Dowels
4x Screws
(12mm)
9x Screws
(25mm)
2x Protective Foam Stickers
You will need
(not supplied)
Philips Head Screwdriver
1x Upstand Side Panel
1x Base Panel
Component Check List Hardware Check List
2x Cushion Pads

4
STEP 2:
Attach x2 cam dowels (#2) to side panel (B). Connect to back panel (A) and
secure with x2 cam locks (#1).
(Note: The large drill holes on panel A should be at the back, not showing on
the front and the small drillholes on the long edge should be facing down.)
Hardware for Step 1: Hardware for Step 2:
STEP 1:
Attach x3 cam dowels (#2) to side panel (C). Attach x1 cam dowel (#2) to
upstand panel (E). Connect upstand panel (E) to panels C and D and secure with
x2 cam locks (#1) as shown.
D
E
C
BA
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
2x #1 Cam Locks 2x #1 Cam Locks
4x #2 Cam Dowels 2x #2 Cam Dowels
FRONT
BACK
Using Cam Locks:
When inserting into the panel, ensure that
each cam lock’s arrow is pointing towards
the drill hole on the side edge of the panel
& the dowel that it will be receiving.
When the panels are in the connected
position, using a screwdriver, turn the cam
lock in a clockwise direction to lock and
secure.

5
STEP 3:
Slot side panel (C) to back panel (A) and secure with x2 cam locks (#1).
Hardware for Step 4:
9x #4 Screws (25mm)
STEP 4:
Orientate base panel (F) ensuring that the countersunk pilot holes are at the
underside and the soft shaped corners are at the front. Bring the upper structure
together with the top of base panel (F) and align the drill holes. Secure with x9
screws (25mm) (#4).
Hardware for Step 3:
2x #1 Cam Locks
B
A
F
#4
#4
#4
#4
#4
#4
#4
#4
#4
#1
#1
C
C
A

6
Copyright© 2021 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 5:
Attach the x2 shelf hooks (G) to back panel (A) with x4 screws (12mm) (#3).
STEP 6:
Once the shelf hooks are attached securely, stick on the protective foam
stickers (#5) to the inside of the shelf hook.
Then stick the x2 cushion pads (#6) to each side of the base panel where
shown.
Once secure - your item is ready to use.
4x #3 Screws (12mm)
Hardware for Step 5:
Hardware for Step 6:
2x #5 Protective Foam Stickers
2x #6 Cushion Pads
#3
#3
#3
#5
#5
#6
#6
G
G
#3