GREISINGER GTH 2448/3 User manual

E26.0.02.6C-05
GHM Messtechnik GmbH • Standort Greisinger
Hans-Sachs-Str. 26 • D-93128 Regenstauf
+49 (0) 9402 / 9383-0 +49 (0) 9402 / 9383-33 [email protected]
Digital Thermometer
Operating Manual GTH 2448 / 2
GTH 2448 / 3
GTH 2448 / 4
GTH 2448 / 5
WEEE-Reg.-Nr. DE93889386

E26.0.02.6C-05 Operating Manual GTH 2448 / 2 / 3 / 4 / 5 Page 2 of 6
_____________________________________________________ _____________________________________________________________________________
CONTENTS
1GENERAL NOTE......................................................................................................................................................3
2SAFETY......................................................................................................................................................................3
2.1 INTENDED USE.....................................................................................................................................................3
2.2 SAFETY SIGNS AND SYMBOLS ..............................................................................................................................3
2.3 SAFETY GUIDELINES ............................................................................................................................................3
3SCOPE OF SUPPLY..................................................................................................................................................4
4ELECTRIC CONNECTION.....................................................................................................................................5
5ACCESSORIES..........................................................................................................................................................5
6SPECIFICATIONS....................................................................................................................................................6
7RESHIPMENT AND DISPOSAL.............................................................................................................................6
7.1 RESHIPMENT ........................................................................................................................................................6
7.2 DISPOSAL INSTRUCTIONS.....................................................................................................................................6

E26.0.02.6C-05 Operating Manual GTH 2448 / 2 / 3 / 4 / 5 Page 3 of 6
_____________________________________________________ _____________________________________________________________________________
1 General Note
Read this document carefully and get used to the operation of the device before you use it. Keep this
document within easy reach near the device for consulting in case of doubt.
Mounting, start-up, operating, maintenance and removing from operation must be done by qualified, specially
trained staff that have carefully read and understood this manual before starting any work.
The manufacturer will assume no liability or warranty in case of usage for other purpose than the intended
one, ignoring this manual, operating by unqualified staff as well as unauthorized modifications to the device.
The manufacturer is not liable for any costs or damages incurred at the user or third parties because of the
usage or application of this device, in particular in case of improper use of the device, misuse or malfunction
of the connection or of the device.
The manufacturer is not liable for misprints.
2 Safety
2.1 Intended Use
The GTH 2448 / …is a digital thermometer. The device must be used only according to its intended purpose and
under suitable conditions.
2.2 Safety signs and symbols
Warnings are labeled in this document with the followings signs:
DANGER
Caution! This symbol warns of imminent danger, death, serious
injuriesand significant damage to property at non-observance.

Attention! This symbol warns of possible dangers or dangerous
situations which can provoke damage to the device or environment at
non-observance.
Note! This symbol point out processes which can indirectly influence
operation or provoke unforeseen reactions at non-observance.
2.3 Safety guidelines
Make it a rule to always observe the following points to exclude any risk whatsoever for the operator.
1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not subjected to
any other climatic conditions than those stated under "Specification".
If the device is transported from a cold to a warm environment condensation may cause in a failure of the
function. In such a case make sure the device temperature has adjusted to the ambient temperature
before trying a new start-up.
2. If there is a risk whatsoever involved in running it, the device has to be switched off
immediately and to be marked accordingly to avoid re-starting.
Operator safety may be a risk if:
- there is visible damage to the device
- the device is not working as specified
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
_DANGER

E26.0.02.6C-05 Operating Manual GTH 2448 / 2 / 3 / 4 / 5 Page 4 of 6
_____________________________________________________ _____________________________________________________________________________
3. When connecting the device to other devices the connection has to be designed most
thoroughly as internal connections in third-party devices (e.g. connection GND with
protective earth) may lead to undesired voltage potentials that can lead to malfunctions or
destroying of the device and the connected devices.
4. Do not use these products as safety or emergency stop devices or in any other application
where failure of the product could result in personal injury or material damage.
Failure to comply with these instructions could result in death or serious injury and material
damage.
5. When operating electric devices parts of these devices will, as a matter of course, be live.
Unless the warnings are observed severe damage to life and limb or to property may be
the result. Make sure that only skilled personnel are working with this device.
Trouble-free operation of this device can only be guaranteed if it is property transported
and stored. Careful installation, mounting, operation and maintenance are vital factors for
the safe operation of this device.
Skilled personnel:
These are persons who are familiar with the installation, mounting, commissioning and the operation of the
product and have acquired a qualification for their job:
- Training or instructions or qualification to switch on/off, isolate, ground and apply markings to circuits and
devices/systems in accordance with the latest state of the art standards of safety technology.
- Training or instructions regarding the proper care and use of suitable safety equipment in accordance with
the latest state of the art standards of safety technology.
- First aid training.
3 Scope of supply
The scope of supply includes:
Digital thermometer GTH 2448 / …
Operating Manual
_DANGER
_DANGER
_DANGER

E26.0.02.6C-05 Operating Manual GTH 2448 / 2 / 3 / 4 / 5 Page 5 of 6
_____________________________________________________ _____________________________________________________________________________
4 Electric Connection
Electric connections for the GTH 2448 / …are located at the back of the device.
Connection is made via screw-type/plug-in terminals (max. terminal range 1,5mm²).
Make it a rule to always mount screw-type/plug-in terminals while they are still loose and connect only later.
If terminals are mounted after connection there is a risk that soldering eyes may come loose. Please use
suitable screw-driver and do not tighten screws by force.
Supply voltage: 12 V DC or 24 V DC
Please make sure to check if supply voltage and
voltage range set conform to each other. Use the
soldering jumper next to the connection terminal
to select supply voltage.
Jumper "A1" open: 24 V (18 - 29 V DC)
Jumper "A1" closed: 12 V (8 - 20 V DC)
Probe connection:
GTH 2448 / 2, / 3: Pt100, 2-wire
GTH 2448 / 4, / 5: Pt1000, 2-wire
Both the connection and commissioning of the device must only be carried out by skilled personnel.
In case of a wrong connection, the device may be destroyed - no warranty claims can be accepted!
5 Accessories
Accessories
Description
GNG220/1-12V
power supply : input: 230V AC; output: 12V DC stabilized, max. 40mA
IP65 SET
O-rings for IP rating IP65 in the front
GTF 102 - …
probe e.g. for screwing in to measuring object.
arbitrary tube diameters, lengths and threads are possible –refer to catalog
GTF 103 - …
probe with connection head (DIN B), R1/2", FL = 100mm, D = Ø 6mm
(for further configuration refer to catalog)
Note:
Some of the above-named probes are 4-wire probes. When connecting them to a GTH2448 put the two
same coloured wires together in one plug-in-terminal.
Terminal assignment
+UV
Supply voltage +
GND
Supply voltage –
Pt
Probe (Pt100 / Pt1000)
Pt
Probe (Pt100 / Pt1000)
soldering jumper A1

E26.0.02.6C-05 Operating Manual GTH 2448 / 2 / 3 / 4 / 5 Page 6 of 6
_____________________________________________________ _____________________________________________________________________________
6 Specifications
Measuring range: GTH2448 / 2, / 4: -200 ... +650 °C
GTH2448 / 3, / 5: -60.0 ... +199.9 °C
Resolution: GTH2448 / 2, / 4: 1 °C
GTH2448 / 3, / 5: 0.1 °C
Probe connection: GTH 2448 / 2, / 3: Pt100, 2-wire
GTH 2448 / 4, / 5: Pt1000, 2-wire
Accuracy: ± 0.5°C ± 1 Digit
Offset adjustment: An Offset of the sensor (e.g. when using long cable) can be compensated with
the spindle potentiometer at the backside of the housing
Display: 3½-digit, red LED-display, 10mm high
Scan rate: approx. 3 measurements / sec
Nominal temperature: 25 °C
Working temperature: 0 …50 °C
Relative humidity: 5 … 95 % r.h. (non-condensing)
Storage temperature: -20 …+70°C
Voltage supply: 12 V DC (8 - 20 V DC) or 24 V DC (18 - 29 V DC) (to be set via soldering jumper)
Power consumption: max. 20 mA
Housing: glass fibre reinforced Noryl, front screen PC.
Dimensions: 24 x 48 mm (H x B) (dimensions of front frame)
Mounting depth: approx. 65 mm (incl. Screw-type/plug-in terminals)
Panel mounting: by means of VA-elastic spike, allows panel thickness:
from 1 to approx. 10 mm
Panel cut-out: 21.7+0.5 x 45+0.5 mm (H x B).
Connection terminals: 4-pin screw-type/plug-in terminals for wire dias ranging from
0.14 to 1.5 mm²
EMC: This device corresponds to the essential protection ratings established in the
Regulations of the Council for the Approximation of Legislation for the
member countries regarding electromagnetic compatibility (2004/108/EG)
It has been tested according to EN61326-1 : 2013 (table 2, class B)
Additional fault: <1%
IP rating: front IP54 (with optional O-rings IP65).
7 Reshipment and Disposal
7.1 Reshipment
All devices returned to the manufacturer have to be free of any residual of measuring media and
other hazardous substances. Measuring residuals at housing or sensor may be a risk for
persons or environment
Use an adequate transport package for reshipment, especially for fully functional devices.
Please make sure that the device is protected in the package by enough packing materials.
7.2 Disposal instructions
The device must not be disposed in the unsorted municipal waste! Send the device directly to
us (sufficiently stamped), if it should be disposed. We will dispose the device appropriate and
environmentally sound.
_DANGER