Groeneveld MultiLine SFi 110 User manual

MultiLine SFi
Connecting Lube Lines
1
Remove bulkhead plug
2
Position lubrication line
from bearing fitting
3
Insert lubrication line
into bulkhead fitting
Route lube lines to appropriate
bearings/components
6
Replace with
appropriate fitting
Remove existing grease fitting
Reducing Lube Points
Remove lube line Remove pump element Replace with plug
Remove lube line
Adjusting Output
Remove blue pump element
Replace with alternative output
pump element, see back
Filling Pump
1
Plug lube line into pump element
Pour lubricant in the top fill.
Oil & NLGI #000 greases ONLY.
2
With grease gun or pump,
fill at the zerk fitting.
NLGI #1 and #2 ONLY.
F801308
1
1 2
3
3
4
For quick selection and output
calculations, open the mobile
web app. MultiLineSF.com
Note: Temporary bulkhead plugs prevent dust from
entering and reduce leakage during shipping or storage.
2
5
4
Groeneveld®SFi Quick Installation Guide (110/220VAC)
1

Alternative Pump Elements & Output
Timer Run
Time
Delay
Time
Cycle
Time
Pump Elements Output (cc/hour)
P-R010
Red
P-G015
Green
P-Y025
Yellow
P-B040
Blue
P-G060
Gray
P-B100
Black
06 min 6 min 12 min 0.050 0.075 0.125 0.200 0.300 0.500
16 min 15 min 21 min 0.029 0.044 0.073 0.116 0.174 0.290
26 min 30 min 36 min 0.017 0.025 0.042 0.067 0.100 0.167
36 min 60 min 66 min 0.009 0.014 0.023 0.036 0.055 0.091
NOTE: Preset from factory at #3 timer setting. Red, green, yellow, grey, and black pump elements sold separately.
MultiLine SFi
Grease Compatibility
Lubricant
Viscosity
Minimum Working Temperature
Other commercially
available lithium grease
Groeneveld GreenLube
for MultiLine
Minimum Temperature GreenLube Grease
NLGI-2 14ºF (-10ºC) N/A
NLGI-1 9ºF (-12.8ºC) GreenLube EP-1
NLGI-0 2ºF (-16.7ºC) GreenLube EP-0
NLGI-00 -8ºF (-16.7ºC) N/A
NLGI-000 -29ºF (-33.9ºC) N/A
SAE80/90 -40ºF (-40ºC) N/A
Lubricants containing solid additives such as PTFE (Teflon), graphite,
molybdenum disulphide (MoS2) or bentone/bentonite (clay) based
greases can cause blockages in the system and should not be used.
SFi Electrical Information
Voltage: 110/220VAC (50/60Hz)
Power Rating: 4VA
Fuse Rating: 1A
IP Rating: IP66
Green = Ground
Black = Negative (-0V)
White = Positive (+110V)
Spare Parts and Accessories
Part Number Description
MSF-P-R010 Red Pump Element – 0.010cc/stroke – (3 pack)
MSF-P-G015 Green Pump Element – 0.015cc/stroke – (3 pack)
MSF-P-Y025 Yellow Pump Element – 0.025cc/stroke – (3 pack)
MSF-P-B040 Blue Pump Element – 0.040cc/stroke – (3 pack)
MSF-P-G060 Grey Pump Element – 0.060cc/stroke – (3 pack)
MSF-P-B100 Black Pump Element – 0.100cc/stroke – (3 pack)
MSF-A-BP10 Blanking Plug (10 pack)
MSF-A-QF Quick Fill Coupler Assembly
MSF-T-4N50E 4mm OD Tubing – Unprimed – 50ft/roll
MSF-T-4N50G 4mm OD Tubing – Primed – Grease – 50ft/roll
MSF-T-4N50F 4mm OD Tubing – Primed – Food Grade Grease – 50ft/roll
F230229* GreenLube EP-0 Grease – 35lb Pail
F801299* GreenLube EP-1 Grease – 35lb Pail
* Available direct from Groeneveld-BEKA
4700 Lyons Road, Dayton, OH 45342
Phone: [phone] |FAX: [phone]
Email: [e-mail]
www.groeneveld-beka.com/US
150 05-21 Order No. 11346 | Groeneveld-BEKA®and Groeneveld® are registered trademarks of The Timken Company or its aliates. | © 2021 The Timken Company | Printed in U.S.A.
WARNING
www.timken.com/warnings
Groeneveld®SFi Quick Installation Guide (110/220VAC)
2