GVM PRO-BD25R User manual

GVM-PRO-BD25R
GVM-PRO-BD45R

Product description ---------------------------------------------- Page 1
Disclaimer ----------------------------------------------------------- Page 2
Use and Save ------------------------------------------------------- Page 2
Product parameter GVM-PRO-BD25R ---------------------- Page 3
Product parameter GVM-PRO-BD45R ---------------------- Page 4
Product Structure Analysis -------------------------------------- Page 5
Installation Method ----------------------------------------------- Page 6
Product Control Key Description ----------------------------- Page 7
Function introduction & instruction --------------------- Page 8~11
APP control --------------------------------------------------- Page 12~13
Precautions ------------------------------------------------------- Page 13
Simple faults and troubleshooting methods ------------ Page 14
Packing List -------------------------------------------------------- Page 15
C O N T E N T S

1
PRODUCT DESCRIPTION
③ Using OLED display, large viewing angle, low power consumption, and
stable and smooth operating system system. Stick-shaped design, and
has two power supply options of mains power supply and battery
power supply, which can be Hand-held custom control fill light. Easy to
carry, allowing you to shoot whatever you want with ease Effect.
We firmly believe that the correct use of this product will definitely have a
great impact on your shooting work.To help, it is strongly recommended
that you read the following user guide carefully before using the product.
Welcome to "GVM-PRO-BD25R / GVM-PRO-BD45R", this product is
designed for senior photography enthusiasts, the product usage
scenarios are suitable for live broadcast/outdoor/performance studio
photography, etc., can also be used for YouTube video shooting.
The main features of the product are:
⑤ It can simulate 6 kinds of Pixel FX light effects: Rolling, Rainbow, Block
Game, PingPong, Wave, Meteor, Custom pixels.
① Have 5 light effect modes: CCT, HSI, RGB, scene light effects, pixel FX
light effects. Bright degree/color temperature/hue/saturation/RGB
color can be controlled at will. LED lights with high CRI beads, which
help restore and enrich the color of objects, giving you natural and
vivid shooting results fruit.
② APP intelligent control system, which can be controlled by your smart
mobile device.
④ It can simulate 12 kinds of scene light effects: Lightning, CCT Loop,
Candle, Bad Bilb, TV, Paparazzi, Explosion, Pulsing, Disco, Cop Car,
Party, HUE Loop.

2
DISCLAIMER
2. Once you use this product, it is deemed that you have carefully read
the disclaimer and warning, understand and agree with all terms and
contents of this statement, and undertake to take full responsibility for
the use of this product and the possible consequences.
3. Design and specifications are subject to change without notice.
1. Before using this product, please read the text carefully to ensure
proper operation of the product. not follow and failure to follow the
instructions and warnings in this article may cause injury to you and
those around you, or even damage the product or other surrounding
items.
USE AND SAVE
Cleaning: Before cleaning, please unplug. And use a damp cloth instead
of any detergent or soluble liquid to avoid damaging the surface layer.
Do not place the product in an environment with high humidity, strong
electromagnetic fields, direct sunlight, and high temperature. If you do
not use this product for a long time, please disconnect the power.
Power supply: Make sure that the power supply is within the required
range of use, too high or too low will affect the work.
Repair: In case of failure or performance degradation, do not open the
case package by yourself to avoid damage to the machine and loss of
maintenance rights. In the event of a malfunction, please feel free to
contact us and we will do our best to solve the problem.
Accessories: Use manufacturer-supplied accessories or approved
accessory products for optimum performance.
Warranty: Do not modify the product or you will void the right to repair.

3
PRODUCT PARAMETER
GVM-PRO-BD25R
Brand: GVM
Product Name: Photography light
Product type: Photography fill light
Features: 5 light effect modes, pixel FX control
Control method: APP Bluetooth, MESH networking control,
Manual control, DMX
Number of lamp beads: 300 pcs
Lumens: 465 lux/1m ; 1630 lux/0.5m
Color rendering index: ≥ 97
Color temperature: 2700K ~ 10000K
Hue: 0°~ 360°
Saturation: 0% ~ 100%
Voltage: AC100V~240V
Power: 25W
Standard power supply: 15V3A
Product net weight: 0.8KG
Product size (mm): 50×46×600
Power supply mode: DC power supply / battery power supply
Battery capacity: 7.4V ~ 4400mAh×2
Product material: Aluminum alloy + engineering plastic
Heat dissipation: Aelf heat dissipation
Place of Origin: China. Huizhou
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆

4
PRODUCT PARAMETER
GVM-PRO-BD45R
Brand: GVM
Product Name: Photography light
Product type: Photography fill light
Features: 5 light effect modes, pixel FX control
Control method: APP Bluetooth, MESH networking control,
Manual control, DMX
Number of lamp beads: 660 pcs
Lumens: 750 lux/1m ; 2180 lux/0.5m
Color rendering index: ≥ 97
Color temperature: 2700K ~ 10000K
Hue: 0°~ 360°
Saturation: 0% ~ 100%
Voltage: AC100V~240V
Power: 45W
Standard power supply: 15V3A
Product net weight: 1.6KG
Product size (mm): 50×46×1200
Power supply mode: DC power supply/battery power supply
Battery capacity: 7.4V ~ 4400mAh×2
Product material: Aluminum alloy + engineering plastic
Heat dissipation: Self heat dissipation
Place of Origin: China. Huizhou
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆

MODE
TAB
ON/OFF
DMX IN DC INDMX OUT
5
Display
Mode key
Toggle key
Parameter
minus key
Parameter
plus key
DMX input
Power button &
Pause/Play key
DC jack
1/4 screw
interface
1/4 screw
interface
3/8 screw
interface
1/4 screw
interface
Support
Battery lock
Battery compartment
Battery compartment
Battery lock
DMX output
PRODUCT
STRUCTURE ANALYSIS

MODE
TAB
ON/OFF
DMX IN DC INDMX OUT
6
DMX OUT
Battery mounting slot
Adapter interface
DMX IN DC IN
INSTALLATION METHOD
1
①Connect the power cord and adapter to supply power.
There are two power supply modes to choose from:
② Use battery power.
(Battery must be inserted in both battery slots to supply power)

7
1
2
5
4
3
6
PRODUCT CONTROL KEY
DESCRIPTION
Mode switch key: Press this key to switch modes.
Parameter - key: Press this key to decrease the parameter value
downwards.
Composite key: long press and hold for 2 seconds to turn on and off;
short press the “start/pause” to turn on in scene light effect mode
and pixel light effects mode.
Parameter + key: Press this key to increase the parameter value
upwards.
Display: Displays the current menu and lighting parameters.
Parameter switch key: Press this key to switch parameters.
1
2
3
5
4
6

8
FUNCTION INTRODUCTION &
INSTRUCTION
① Set up：
CONTROL: There are two control modes, Master/DMX.
DMX MODE: BD25R/BD45R provides a variety of DMX
modes, please download the DMX channel table on the
official website www.gvmled.com to view the detailed
configuration information.
RESET: Press [TAB key] to switch to [ ] → press RESET
[+/- key] to select [Yes/No] for system reset operation
VERSION: Version number, showing the current
software version.
DMX PIXEL: The lighting effect of single or multiple
pixels can be controlled through DMX.
Press [MODE key] to switch to [ ] menu
BT RESET: Press [TAB key] to switch to [BT RESET] → press
DMX ADDR: DMX channel setting, range 1-512.
LANGUAGE: Support [Chinese/English].
· Master: This is the Master control mode, the screen displays the icon ,
and the light effect is controlled by the APP or the buttons on the light.
Press [TAB key] to switch to [ ] → press [+/- LANGUAGE
key] to select language
[+/- key], Select [Yes/No] for Bluetooth reset operation
Press [TAB key] to switch to [DMX channel] → press [+/- key] to select the
channel.
· DMX: This is the DMX control mode, the screen
displays the icon , and the light effect is adjusted
by connecting to the DMX console. This mode is not
controllable by the APP.
Press [TAB key] to switch to [ ] → press [+/- CONTROL
key] to select control mode [Master/DMX]
CONTROL :
BT RESET:
Master
NO
CONTROL :
BT RESET:
DMX
NO
DMX ADDR:
DMX PIXEL:
LANGUAGE:
RESET:
VERSION :
DMX MODE:
1
ENG
V1.1
NO
CCT&RGB
1

9
② CCT mode:
CCT: Press [TAB key] to switch to [CCT] → press [+/- key] to adjust color
temperature
G/M: Press [TAB key] to switch to [G/M] → press [+/- key] to adjust the
green/magenta offset
INT: Press [TAB key] to switch to [INT] → press [+/- key] to adjust intensity
of light
In the [Master] control mode, press the [MODE key] to
switch to the [CCT] mode, which can adjust the INT,
CCT and green/magenta offset of the light.
③ HSI mode:
In the [Master] control mode, press the [MODE key] to
switch to the [HSI] mode, and the INT, HUE and SAT of
the light can be adjusted.
SAT: Press [TAB key] to switch to [SAT] → press [+/- key] to adjust
saturation.
HUE: Press [TAB key] to switch to [ ] → press [+/- key] to adjust hue.HUE
INT: Press [TAB key] to switch to [INT] → press [+/- key] to adjust intensity
of light.
④ RGB mode:
B: Press [TAB key] to switch to [B] → press [+/- key] to
adjust the blue parameter of light.
In the [Master] control mode, press the [MODE key] to switch to the [RGB]
mode, which can adjust the intensity of light of the light and the three
primary colors (red/green/blue).
INT: Press [TAB key] to switch to [INT] → press [+/- key] to adjust intensity
of light.
R: Press [TAB key] to switch to [R] → press [+/- key] to adjust the red
parameter of light.
G: Press [TAB key] to switch to [G] → press [+/- key] to
adjust the green parameter of light.
RGB
HSI
INT:
HUE: SAT:
CCT
INT:
CCT:
G/M:
100
2700K
G
0
100
360°100
INT:
100
R
255 G 255 B 255
%
%
%

10
⑤ EFFECT mode:
INT: Press [TAB key] to switch to [INT] → press [+/- key]
to adjust intensity of light.
In the [Master] control mode, press the [MODE key] to switch to the
[Effect] mode, you can select the scene light effects and adjust the
parameters of the current light effects, and press the [ ] key to
[Start/Stop] the scene light effect.
FX: Press [TAB key] to switch to [FX] → press [+/- key] to switch scene
light effect.
SAT: Press [TAB key] to switch to [SAT] → press [+/-
key] to adjust saturation.
There are 12 kinds of scene light effects: lightning, CCT Loop, Candle, Bad
Bilb, TV, Paparazzi, Explosion, Pulsing, Disco, Cop Car, Party, HUE Loop.
SPD: Press [TAB key] to switch to [SPD] → press [+/-
key] to adjust the speed.
CCT: Press [TAB key] to switch to [CCT] → press [+/-
key] to adjust color temperature.
⑥ PIXEL FX mode:
In the [Master] control mode, press the [MODE key] to switch the lighting
mode to [Pixel FX], the following parameters can be adjusted, and press
the [ ] key to pause/play the pixel light effect.
FX: Press [TAB key] to switch to [FX] → press [+/- key]
to switch scene light effects
6 pixel light effects can be simulated: Rolling, Rainbow,
Block game,Ping Pong, Wave, Meteor
INT: Press [TAB key] to switch to [INT] → press [+/- key] to adjust intensity
of light.
ST: Pixel light effect status, there are two statuses [Stop] and [Run]. Press
[TAB key] to switch to [ST] → press [+/- key] to switch state.
SPD: The running speed, the running speed of the pixel
light effect, the range is 1~10. Press [TAB key] to switch
to [SPD] → press [+/- key] to adjust the speed.
EFFECT
INT:
FX :Lightning
EFFECT
SPD:
CCT: K
100
%
10000
10
PIXEL FX
FX :
ST :Stop
Rolling
PIXEL FX
INT:
SPD:10 Dir:
INT:
100
%

PIXELS: Adjust the number of motion lattices of the
light: 1~X.
Hue 1: The foreground hue, followed by the SAT of the
hue
Hue 2: The background hue, followed by the SAT of the
hue
· When Colors=2~X, multi-color rolling.
· When [Colors=CCT], the color temperature rolling.
Adjustable color temperature, G/M, motion lattice.
Dir: Running direction, the running direction of the pixel light effect, left
or right. Press [TAB key] to switch to [Dir] → press [+/- key] to switch the
running direction.
Note: If the values of Hue 1 and Hue 2 are equal or
their SAT is 0, then the effect of the pixel FX cannot be
displayed.
Press [TAB key] to switch to [ ] → press [+/- key] COLORS
to switch parameters.
COLORS: The number of colors, this parameter is only
valid in [Rolling] mode, the value is CCT, HSI,
2~X(BD25R:X=15;BD45R:X=33).
· When [Colors=HSI], the hue flows. Adjustable hue,
saturation, motion lattice.
PIXEL FX
COLORS:
HUE:
PIXEL FX
PIXELS:
PIXEL FX
COLORS:CCT
CCT: GM: 2700
G
0
PIXEL FX
COLORS:HSI
HUE: SAT: 360°100
0°360°
6
9
PIXEL FX
HUE : SAT: 1001
HUE : SAT: 1001802
360
K
11

12
APP CONTROL
APP download method
(Scan the QR code on the back of the manual to download the APP)
Android version: official website QR code, Google Play,
Huawei Store, etc.
iOS version: App Store
Register an account
Some email servers may recognize our verification
email for advertising purposes, please check your
blocked email inbox.
There may be a delay in sending the verification code,
and the delivery speed depends on your order e-mail
server used;
Register and log in with your email; (Figure 1)
Figure 1
Figure 2
GVM-PRO-BD25R GVM-PRO-BD45R
Add device
①Before adding a device, please
make sure that you have enabled
turn on the Bluetooth and network
data functions of the mobile phone,
and reset the Bluetooth of the
lighting device;
②On the "My Devices" page, click
"Add Device" button, look for
nearby Bluetooth lighting devices
that are turned on, and select the
one that needs to be connected.
The device is connected to the
network. (figure 2)
* Android system requires location permission to be turned on to connect
devices using Mesh technology, We do not collect any of your location
information during this process.

13
Figure 4
GVM-PRO-BD25R GVM-PRO-BD45R
Figure 3
GVM-PRO-BD25R GVM-PRO-BD45R
Device management
①After successfully adding your
l ighti n g e quip m e n t , y o u r
equipment will be displayed in
"My Equipment" list; (Figure 3)
②Click the device bar to enter the
device control. (Figure 4)
PRECAUTIONS
② The product is not waterproof, please use it in a rain-proof environment;
① Please use the matching power adapter to supply power to the product, do not
use non-original power adapters with different output power power adapter with
voltage parameters to supply power to the product;
④ When the product is in use, it is necessary to ensure that the product is placed
firmly to prevent the product from falling and being damaged;
③ The product is not anti-corrosion, do not let the product come into contact with
any corrosive liquid;
⑤ When the product is not used for a long time, please turn off the power of the
product to save energy consumption;

SIMPLE FAULTS AND
TROUBLESHOOTING METHODS
Fault
phenomenon Check the product Troubleshoot
Turn on light is
off
After the APP
enters the Add
Device, the
device Bluetooth
cannot be
searched
APP failed to
connect to the
device network
The device
cannot be
searched after
being removed
from the APP
The device click
in the APP
cannot enter the
control
①Wh ethe r th e co nne ctio n
between the lamp and the
power supply is normal.
②When using lithium battery for
power supply, make sure that
the battery does not have "low
power" protection
Check whether the device is
turned on normally and whether
it has been bound by others.
Check whether the device is
turned on normally and whether
it has been bound by others;
check whether the Bluetooth and
network conditions of the mobile
phone are in good condition.
Whether to remove the device
when the device is offline or in
poor network conditions.
Check whether the device is
online (a small green dot is
displayed); if it is offline, you can
check it according to the steps of
network connection failure.
Make sure the adapter plug is
making good contact
Usi ng th e produ ct af ter
charging the battery
Normal steps:
①The mobile phone has the
Bluetooth and network data
functions enabled, and the
Android system needs to
e n a b l e t h e l o c a t i o n
permission;
②Reset the device Bluetooth.
Retry the connection after
resetting the device Bluetooth
and restarting the APP.
After resetting the device's
Bluetooth, search again to add
the device.
Restart the device, wait for 5
seconds, it can be controlled
when it is displayed as online;
reset the device's Bluetooth,
and add the device to the
device list again.
14

PACKING LIST
Name
Quantity
Notes
Light
Suit
Photography
light 1
Power cable 1
Power adapter 1
Battery 2
Battery charger 2
1/4 eye screw 1
15
Carrying bag 1
Manual 1

FacebookGVM Official
website
Download APP
Web: www.gvmled.com
B&H Email: [e-mail]
GVM Email: [e-mail]
Amazon Email: [e-mail]
Warehouse Add: 4301 N Delaware ave, unit D. PHILADELPHIA, PA19137, USA