Gyrocopters FLASH 3.0 User manual

OPERATION MANUAL
FLASH 3. 0
FLASH 3.0
GYROCOPTERS

HELMETS
SAVE
LIVES!
Always wear a properly tted helmet that
complies with CPSC or CE safety standards
when you ride your scooter.
Correct Fitting:
Make sure your helmet
covers your forehead.
Incorrect Fitting:
Forehead is exposed
and vulnerable to
serious injury.
1

WARNING
As with all mechanical components, the Flash 3.0
is subjected to wear and high stresses. Different
materials and components may react to wear or
fatigue in different ways. If the design life of a
component has been exceeded, it may suddenly
fail possibly causing injuries to the rider. Any form
of crack, scratch or change of coloring in highly
stressed areas indicate that the life of the
component has been reached and it should be
replaced. Do not ride in an abusive manner.
In this manual, the CAUTION sign indicates a
hazardous situation which, if not avoided, can
cause minor or moderate injury.
CAUTION
WARNING
In this manual, the WARNING sign indicates a
hazardous situation which, if not avoided, can
cause death or serious injury.
Great care should be taken with the Flash 3.0
when folding or unfolding.
DO NOT RIDE YOUR FLASH 3.0 WITHOUT ALL
RELEASES SECURELY LOCKED.
WARNING
2

PLEASE READ THE USER MANUAL THOROUGHLY.
Failure tofollow the basicinstructions and safety precautions listed in
the user manual can lead to damage to your device, other property
damage, serious bodilyinjury, and even death.
Thank you for purchasing the Flash 3.0. Please read all
instructions carefully before using and retain this manual for future use
and reference.
This manual applies to the Flash 3.0
•In order to avoid dangers that are caused by collisions, falls, and loss
of control, please learn how to ride safely.
• You can learn operating skills by reading the product manual and
watching videos.
•This manual includes operating instructions and precautions. Users
must read it carefully and follow the instructions.
• All users are responsible for any consequences caused by
violating warning contents or prompt operations. Flash 3.0 can
not be held liable.
ATTENTION
1. Use only the supplied charger with this scooter.
Charger Manufacturer: SHENZHEN FUYUANDIAN POWER CO LTD
Model:FY0634201500
The operating temperature range of the charger is -4 – 140° F
(-20 – 60° C).
3. The operating temperature range of the E-Scooter is 32 – 113° F
(0 – 45° C).
Do not ride on icy or slippery surfaces
Read the operation manual and warning labels before riding.
Store the in a dry, ventilatedenvironment.
When transporting the Flash 3.0 avoid violent crashesor impact.
WARNING!
3

LOW TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside
the scooter increasing internal resistance. At the same time, in low
temperatures, the discharge capacity and the capacity itself of
the battery will be significantly decreased.
Use caution when riding the scooter cold temperatures (below
40 degrees F).
Doing so may increase the risk of mechanical failures of the
scooter, which may lead to damage to your device, other
property damage, serious bodily injury and even death.
SAFETY INSTRUCTIONS
•Keep the device away from heat sources, direct sunlight,
humidity, water and any other liquids.
• Do not operate the device if it has been exposed to water,
moisture or any other liquids to prevent against electric shock,
explosion and/or injury to yourself and damage to the device.
•Do not use the device if it has been dropped or damaged in
any way.
•Repairs to electrical equipment should only be performed by
the manufacturer. Improper repair voids the warranty and may
place the user at serious risk.
• Do not puncture or harm the exterior surface of the product in
any way.
• Keep the device free from dust, lint, etc.
• Do not use this device for anything other than its intended use
or purpose. Doing so may damage the device or lead to
property damage, injury or death.
•This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or batteries installed to
excessive heat, such as direct sunlight, or open flame.
• Do not allow hands, feet, hair, body parts, clothing or similar
articles to come in contact with moving parts, wheels or drive-train,
while the Flash 3.0 is running.
4

•Do not operate, or allow others to operate, the Flash 3.0 until the
user understands all instructions, warnings and safety features
described in this manual.
•Check with your doctor if you have a medical condition that could
affect your ability to use the Flash 3.0.
• Persons with head, back or neck ailments or prior surgeries
to those areas of the body are not recommended to use
this Flash 3.0.
•Do not operate if you are pregnant, have a heart condition, or
have both.
• Persons with any mental or physical conditions that may make
them susceptible to injury or impair their physical or mental
capabilities to recognize, understand and perform all of the
safety instructions and to be able to assume the hazards inherent
in unit use, should not use the Flash 3.0.
In this manual, the above symbol with the word “NOTES” indicates
instructions or relevant facts the user should remember prior to using
the device.
In this manual, the above symbol with the word “CAUTION” indicates
a hazardous situation which, if not avoided, can cause minor or
moderate injury.
In this manual, the above symbol with the word “WARNING”
indicates a hazardous situation which, if not avoided, can cause
death or serious injury.
WARNING: Prolonged exposure to UV rays, rain and the elements
may damage the enclosure materials. Store indoors when not in use.
WARNING!
WARNING!
CAUTION!
NOTES:
5

This manual is designed to give you the information you need for the
safe operation and maintenance of your new Flash 3.0
scooter. Please read it thoroughly before riding your Flash 3.0.
The Flash 3.0 is a personal transporter. Our technology
and production processes are developed with strict testing for
each Flash 3.0 scooter. Operating the Flash 3.0 without
following the contents of this manual may lead to damage
to your scooter, or bodily injury.
PACKAGE CONTENTS
•Flash 3.0 Electric Folding Scooter
•Charging Cable
• Wall Charger
• Operation Manual
Your Flash 3.0 serial number is stamped respectively on the
kickstand side of the platform. Record the serial number in the
designated area of the “WARRANTY” section of this manual in the
event that your Flash 3.0 is lost or stolen.
•The first rule in safe riding is to use common sense.
•Different localities and countries have different laws governing riding
electric transportation devices on public roads.
• You should check with local officials to ensure you are complying
with local traffic law requirements.
•Flash 3.0 is not liable for tickets or violations given to riders who do not
follow local laws and regulations.
• For your safety, always wear a helmet that meets CPSC or CE safety
standards. In the event of an accident, a helmet can protect you
from serious injury and in some cases, even death.
INTRODUCTION
WARNING
Make sure you read this complete
manual before riding your Flash 3.0.
Failure to do so, or failure to follow its
guidelines could lead to serious
injury or death.
SAFETY PRECAUTIONS
6

• Obey all local traffic laws. Obey red and green lights, one-way
streets, stop signs, pedestrian crosswalks, etc.
• Ride with the traffic, not against it.
• Ride defensively; expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians and alert them if you intend to
pass them from behind.
• Slow down at all street intersections and look to the left and right
before crossing.
Your Flash 3.0 electric folding scooter is not equipped with reflectors.
It is not recommended that you ride in conditions of low visibility.
If you are riding your scooter in low-visibility conditions, ensure your LED
light is turned on, and that you are wearing bright, reflective clothing.
Think about safety when you ride. You can prevent many accidents
if you think about safety. Below is a helpful checklist for riders.
SAFETY CHECKLIST
•Do not ride above your skill level. Ensure you have had enough
practice with all functions and features of your Flash 3.0.
• Do not ride too fast -- with increased speed comes increased risk. If
you are moving at a higher speed, small bumps can turn into large
impacts, leading to a higher risk of injury if an accident occurs.
• Do not ride with pets.
• Before stepping on your Flash 3.0 make sure it is placed flat on level
ground and the power is on.
WARNING
When you ride in low-visibility conditions
such as fog, dusk, or night, you might be
diicult to see, which could lead to a
collision. To increase your level of safety,
be sure wear bright, reective clothing
when riding in poor lighting conditions.
7

•Do not try to open or modify your scooter. Doing so, voids the
manufacturer warranty and may cause your scooter to fail,
resulting in injury or death.
• Do not use the scooter in a manner that would put people or
property in danger.
• If you and your friend(s) are riding scooters together, be sure to
keep a safe distance between each other to prevent
collisions,property damage, serious injuries or even death.
• Be sure to keep your feet on the scooter at all times. Moving your
feet off your scooter while driving is dangerous and may cause the
scooter to stop or veer sideways.
• Do not operate while under the influence of drugs and/or
alcohol.
• Do not operate when you are restless or sleepy.
•Use your best judgment to keep yourself out of dangerous situations
with your scooter.
•Do not ride scooter off of curbs, ramps, or attempt to operate in a
skate park, empty pool, or in any way similar to a skateboard.
Misuse of your scooter voids the manufacturer warranty and may
lead to injury or damage.
• Do not abuse your scooter, doing so can damage your unit and
cause failure to the operating system which may lead to injury.
Physical abuse, including dropping your scooter, voids the
manufacturer warranty.
•Do not operate in or near puddles of water, mud, sand, stones,
gravel, debris or near rough and rugged terrain.
• The scooter can be used on paved surfaces that are flat and even.
If you encounter uneven pavement, please lift your scooter scooter
over and past the obstruction.
• Do not ride in inclement weather: snow, rain, hail, sleek, on icy roads
or in extreme heat or cold.
• Bend your knees when riding on bumpy or uneven pavement to
absorb the shock and vibration and help you keep your balance.
• If you are unsure if you can safely ride on a specific terrain, step off
8

and carry your Flash 3.0. ALWAYS BE ON THE SIDE OF CAUTION.
•Do not attempt to ride over bumps or objects greater then ½ in.
even when prepared and bending your knees.
•PAY ATTENTION - look at where you are riding and be conscious of
the road conditions, people, places, property and objects around
you.
• Do not operate the scooter in crowded areas.
• Operate your scooter with extreme caution when indoors,
especially around people, property, and narrow spaces.
• Do not operate the while talking, texting, or looking at your phone.
• Do not ride your scooter where it is not permitted.
• Do not ride your near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The scooter is intended for use by a single individual, DO NOT
attempt to operate the scooter with two or more people.
• Do not carry anything while riding the scooter.
• Individuals with lack of balance should not attempt to operate the
scooter.
• Pregnant women should not operate the Flash 3.0 scooter.
•Young children and the elderly should not operate the scooter.
•At higher speeds, always take into consideration longer
stopping distances.
• Do not attempt to jump on or off your scooter.
WARNING
Proper use of your brake is vital to ensure safe, eicient
stopping. To avoid misuse and potential injury, do not
apply sudden or excessive force to your brakes. Apply
your brakes gradually and give yourself enough room to
come to a complete stop safely.
9

•Do not attempt any stunts or tricks with your scooter.
• Do not ride the Flash 3.0 in dark or poorly lit areas.
• Do not ride the scooter near or over potholes, cracks or uneven
pavement or surfaces.
• Do not operate your scooter off-road.
• Do not turn sharply, especially at high speeds.
•Do not exceed the maximum or minimum weight limits.
•Avoid driving the Flash 3.0 in unsafe places, including near areas
with flammable gas, steam, liquid, dust, fiber, which could cause fire
and explosion accidents.
•Do not operate near swimming pools or other bodies of water.
WARNING
There may be additional risk to injury if you use your
scooter incorrectly. This includes, but is not limited to:
• Jumping your scooter
• Riding over debris or obstacles
• Performing stunts
• Riding in o-road terrain
• Riding fast
• Racing other riders
• Riding in unusual manner
The aforementioned examples add stress to each part
of your scooter and can lead to long term damage of
the device. Damage to your scooter can lead to an
accident or increase your risk of injury. To decrease
your risk of injury, use your scooter correctly.
WARNING
When you ride in low-visibility conditions such as fog, dusk,
or night, you might be diicult to see, which could lead to
a collision. In addition wear bright, reective clothing
when riding in poor lighting conditions.
10

•Do not expose the device to liquid, moisture, or humidity to avoid
damage to the product's internal circuitry.
• Do not use abrasive cleaning solvents to clean the device.
• Do not expose the device to extremely high or low temperatures as
this will shorten the life of the electronic device, destroy the battery,
and/or distort certain plastic parts.
• Do not dispose of the device in fire as it may explode or combust.
• Do not expose the device to contact with sharp objects as this will
cause scratches and damage.
• Do not let the device fall from high places, as doing so may
damage the internal circuitry.
• Do not attempt to disassemble the device.
• Use only the charger provided by Flash 3.0.
CARE & MAINTENANCE
WARNING
To reduce the risk of injury, adult supervision is
required. Never use in roadways, near motor vehicles,
on or near steep inclines or steps, swimming pools or
other bodies of water; always wear shoes, and never
allow more than one rider.
WARNING
Avoid using water or other liquids for cleaning. If water
or other liquids enter the Flash 3.0, it will cause
permanent damage to the internal components.
WARNING
Users who disassemble the scooter without permission
will void the warranty.
To reduce the risk of injury, adult supervision is required. Never use
in roadways, near motor vehicles, on or near steep inclines or
steps, swimming pools or other bodies of water; always wear
shoes, and never allow more than one rider.
WARNING
11

•Do not attempt to modify, change, or replace your battery.
• Do not use your device if the battery begins to emit odor, overheats,
or begins to leak.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances, do not open the
battery, or insert anything into the battery.
• Please only use the charger provided.
• Do not attempt to charge the device if the battery has discharge
or emits any substances. In that case, immediately distance yourself
from the battery in case of fire or explosion.
• Lithium-ion batteries are considered to be hazardous materials.
Please follow all local, state and federal laws in regards to recycling,
handling and disposing of Lithium-ion batteries.
WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF
YOU ARE EXPOSED TO ANY SUBSTANCE
THAT IS EMITTED FROM THE BATTERY.
13

. lbs (1 kg)
2lbs (1 0 kg)
Up to ( km/h)
Up to 1miles ( km)
Lithium-ion
350W Brushless Motor
37 V
Ah
AC 100-240V, 50/60 Hz
(42in. x 16.5in. x 19.2in.)
(107cm x 42cm x 49cm)
(42in. x 16.5in. x 44.8in.)
(107cm x 42cm x 114cm)
8.5” Front & Rear
Handle ActivatedRear Disk
Model:
Net Weight:
Max SupportedWeight:
Max Speed:
Max Distance Range
BatteryType:
Motor Power:
Battery Voltage: Battery
Capacity: Power
Requirement: Folding
Size:
Open Size:
Tire Type:
Tire Size:
Brake Type:
SPECIFICATIONS
PARTS LIST
B
C D
A
A. Scooter Frame
Handle Bar Assembly
Charger + Charge Cable
Allen Wrench & Bolts
14

FLASH 3.0 DIAGRAM
15

FLASH 3.0 DIAGRAM
LCD DISPLAY
POWER BUTTON
LCD DISPLAY
BRAKE HANDLE
FOLDING CLIP
THROTTLE
SPEEDOMETER
Displays your current speed in Mph.
Displays the current speed in Level:
Ensure it is power on, Press once to
switch high speed / low speed mode:
1 - Low speed
2- High speed
HIGH SPEED MODE
Indicates high speed mode
is activated.
HEADLIGHT ICON
Indicates the headlight is activated.
BATTERY INDICATOR
Displays your current battery level.
16
KM

WARNING
Any Flash 3.0 that does not work properly
can cause you to lose control and fall.
Inspect the entire device thoroughly
before every ride, and do not ride it until any
problems have been corrected.
CHARGING THE DEVICE
•Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
•Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V ~ 240V; 50/60 Hz).
• Align and connect the 1-pin charging cable into the charging
port of the Flash 3.0 Scooter.
(DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY
CAUSE THE PRONGS TO BEND OR BREAK.)
•The charging indicator light on the charger itself should change to
RED, indicating that your device is now being charged.
• When the RED indicator light on your charger turns to GREEN, then
your device is fully charged.
•After fully charging your Scooter, unplug the charger from your
device and from the power outlet.
Only use the included charging cable and
charger to charge your Flash 3.0. Using any
other unauthorized charger may damage your
Flash 3.0.
CAUTION
CHARGING YOUR FLASH 3.0
17

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBAR KIT
Attach the handle bar kit by placing it into the steering column, align
the front and back screw holes, and tighten the 4 screws into place.
Some parts of your Flash 3.0 can injure you if mishandled. Moving
and folding parts can cut skin. Clamps and pivoting parts such as
brake levers can pinch. When folding and unfolding your Flash
3.0, Please watch for pinch points where possible injury may be
sustained. Do not leave your hand in these areas during folding
or unfolding.
PREPARING YOUR SCOOTER
PINCH POINTS
18

FOLDING & UNFOLDING YOUR FLASH 3.0 SCOOTER.
To unfold your scooter press down on the folding clip and pull the
steering column up. Raise the safety lock up and push it into place to
secure the steering column. You will hear a “click”, indicating
the steering column is locked. Ensure the steering column is
secured in place.
FOLDING & UNFOLDING
HIGH SPEED MODE
To active high speed mode, ensure the scooter is powered on and
not in motion. Press the power button twice. The high speed mode
indicator should light up on your display to indicate it is activated.
CRUISE CONTROL
To active cruise control, you must hold the throttle at a constant speed
above 3mph for 5 seconds. For example, if you want to activate cruise
control at 10mph, hold the throttle at 10 mph for 5 seconds. You will
hear a beep and the cruise control indicator will light up on the LCD
display indicating that it is activated.
FOLDING
HINGE
R
A
I
S
E
O
R
L
O
W
E
R
Release folding clip
to fold steering column
19