Gyrocopters PLAID User manual
P AID ELECTRIC
SCOOTER
GYROCOPTERS
INSTRUCTION MANUAL
CONTENT
GENERAL SAFETY DIRECTIVE 4
BATTERY SAFETY INSTRUCTIONS 4
CHARGER SAFETY INSTRUCTIONS 5
KNOW YOUR GYROCOPTERS PLAID ELECTRIC SCOOTER 6
SPECIFICATIONS 6
USER GUIDE 7
DISPLAY MODULE 11
GYROCOPTERS PLAID ELECTRIC SCOOTER OPERATION 12
GYROCOPTERS PLAID ELECTRIC SCOOTER OPERATION 13
FOLDING THE SCOOTER 14
PAGES
3
GENERAL SAFETY DIRECTIVE
BATTERY SAFETY INSTRUCTIONS
Before each use, thoroughly check the whole device, such as motor, front-wheel, folding joints, etc., whether the locking screws are
damage.
c.
4
CHARGER SAFETY INSTRUCTIONS
Carefully check the power plugs and cables for damage before use.
Always use the original charger provided with the product.
disconnected immediately.
Keep the charger away from children.
Protect the charger and other electrical components from dampness. Do not soak them in liquid when cleaning or in use.
Maintenance must be carried out by authorized professionals. Always contact customercare@gyrocopters.com if you need any
5
6
KNOW YOUR GYROCOPTERS PLAID ELECTRIC SCOOTER
Note : Gyrocopter Plaid is not a front-wheel motor model
7
Expand: Long, Width & HeightVehicle Parameters
Ba�ery Parameters
SPECIFICATIONS
Content Parameters
Net Weight
Top Speed
Climbing Ability
Terrain
Opera�ng Temperature
Charging Time
Storage Temperature
1247x675x556
23.6kg
45Km/H
30 Degrees
Ci�es & Mountains
-5-40 Degrees
4-5 Hours
10Ah
48v
10 Inches
-20-40 Degrees
Voltage
Capacity
Motor Dimensions
8
Maximum TorqueMotor parameters
Tire
Charger
Brake
SPECIFICATIONS
Content Parameters
Voltage
Rated Power
Maximum Power
Motor Type
Brake Braking Mode
Brake Stop Distance
Outer Tier Size
32N
48v
800W
1000W
Rear Brushless
Front And Rear Mechanical Disc Brake
<4.57 M
Off-Road Pa�ern
100V~240V
150KG
10x2.75x6.5 Off-Road Tire
Input The Voltage
Outer Tire Pa�ern
Maximum Load
9
USER GUIDE
This sec�on provides informa�on about how to use the product correctly. Following these instruc�ons is necessary for the safety of the
user and the service life of the product.
Insert the handlebars into the tube and lock it with 4
screws.
Close the folding plug, buckle the lock, and twist the
lock.
10
USER GUIDE
11
DISPLAY MODULE
12
DISPLAY MODULE
GYROCOPTERS PLAID ELECTRIC SCOOTER OPERATION
13
GYROCOPTERS PLAID ELECTRIC SCOOTER OPERATION
Press the power switch and turn on the vehicle power supply, confirm that the power is sufficient before riding.
Standing on the deck with one foot on deck, press the accelera�on once the scooter has gained momentum put the other foot on
deck.
Press the accelera�on switch on the handle to accelerate, release the switch to decelerate
Press the real and front brakes at the same �me in case of an emergency, braking with only the front brake may cause an accident.
When turning, please slow down and turn the handlebars slowly.
14
FOLDING THE SCOOTER
WHAT’S IN THE BOX
Turn the fold connector knob counter- clockwise un�l the fold connector buckle no longer holds the connector
Fold the handlebars and tubes to the rear fender.
1 vehicle; 4 M5*P0.8 screws, 1 x internal hexagon wrench, 1 charger
Other manuals for PLAID
1
Table of contents
Other Gyrocopters Scooter manuals
