GYROZEN 1730R User manual

Microcentrifuge
Quick Guide
Operation
Start / Stop
LED ON : Start / Run
LED OFF : Stop
Setting Speed
Touch once : RPM
Touch twice : RCF
Short Spin
Setting Time
To 99 min. 59 sec.
or Continuous (00:00)
Setting ACC / DEC
ACC (1 ~ 9 / Max. 9)
DEC (0 ~ 9 / Natural DEC 0)
Lid Open
Open : LED turns on
At Set Speed
On : Counts the time at set speed
O󽗈 : Counts the time from starting
Touch continuous : Controls repeat time /
sound volume of end alarm
Temp / Fast Cool
-20℃ ~ 40℃,
Fast Cool
(fast temp function)
Display Screen
Status of Speed, Time,
Temperature, ACC,
Running, DEC,
Lid Open / Close
Start / StopFunction Selection
Touch up and down buttons
to change and touch
enter button to save
Touch a parameter
to be changed
PROG Save / Call
Fast Cool (Quick Temperature Down)
Touch TEMP button more than 2 sec. Touch start / stop button
Touch once : CALL
Touch twice : SAVE
Display & Control Panel
Cat. No. GZ-1730R
Touch up and down buttons
to change and touch
enter button to save or call
Program SAVE / CALL
Touch once : CALL
Touch twice : SAVE (up to 100)
Touch continuous: Lock / Unlock
TEMP
min sec

Microcentrifuge
Quick Guide
GRE-M-m2.0-24
for 24 x 1.5 / 2.0 ㎖ microtubes
GRE-M-m2.0-30
for 30 x 1.5 / 2.0 ㎖ microtubes
GRE-M-m2.0-18
for 18 x 1.5 / 2.0 ㎖
microtubes or 󽗉lter tubes
GRE-M-m5.0-12
for 12 x 5.0 ㎖ microtubes
GRE-M-s0.2-64
for 64 x 0.2 ㎖ PCR tubes or
8 rows of PCR strips
GRD-M-m2.0-8
for 8 x 1.5 / 2.0 ㎖ microtubes
GRD-M-m2.0-16
for 16 x 1.5 / 2.0 ㎖ microtubes
Interchangeable rotors
Check the rotor is installed correctly and is
sitting 󽗉rmly on the motor shaft.
Rotor checking
Clean the motor shaft. Remove the foreign
substances not to cause any vibration.
Motor shaft & rotor
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
User 2017-01-12
설계자 점검자 승인자 날짜
1 / 1
에디션 용지
날 짜
Keep the centrifuge dry after use for pro-
longed durability. Take the rotor out and
clean the shaft with the dry soft cloth.
Keep the lid open after every use
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
User 2017-01-12
설계자 점검자 승인자 날짜
1 / 1
에디션 용지
날 짜
Load the sample tubes symmetrically.
Balance buckets and samples
Check the O-ring is inserted on the right place
of the rotor. Make the rotor lid loose when not
using the centrifuge for prolonged durability
of O-ring.
O-ring maintenance
O-ring
Order & Inquiry : [phone]ㅣ[e-mail]ㅣ[e-mail]ㅣwww.gyrozen.com
Download corresponding user manual from www.gyrozen.com
Precautions and Maintenance Tips
EQG-2(Rev.1)
One step clicking action is enough to
make a closure of rotor lid.
Easy lock lid
Turn the power switch o󽗈 after using the cen-
trifuge. Unplug power cord before cleaning or
whenever the centrifuge is to remain unused for
a long period of time.
Shut down power after operation