H3C LSWM124TG2H User manual

Overview
H3C LSWM124TG2H Interface Card User Manual-6PW108
H3C LSWM124TG2H -6PW108
You can install QSFP28 modules, QSFP28 cables, QSFP28 to SFP28 cables, QSFP+
modules, QSFP+ cables, and QSFP+ to SFP+ cables in the QSFP28 ports. QSFP28口可
选配QSFP28模块、QSFP28线缆、QSFP28 to SFP28电缆、QSFP+模块、QSFP+线缆和
QSFP+ to SFP+电缆。
You can install SFP28 modules, SFP28 cables, SFP+ modules, SFP modules, and SFP+
cables in the SFP28 ports. SFP28口可选配SFP28模块、SFP28电缆、SFP+模块、SFP模
块和SFP+线缆。
The transceiver module and cable types supported by the LSWM124TG2H interface card
vary by device model. For more information, see the installation guide or hardware
reference for the device, or contact H3C Support or marketing staff.
LSWM124TG2H接口模块扩展卡在不同产品上支持的模块/线缆可能不同，准确的支持信息请
参考产品的安装指导或硬件介绍，或咨询H3C公司市场人员或技术支持人员。
The restrictions and guidelines for using the LSWM124TG2H interface card vary by device
model. For more information, see the installation guide or hardware reference for the
device. LSWM124TG2H接口模块扩展卡在不同产品上可能具有不同的使用限制，具体请参考
产品的安装指导或硬件介绍。
The LSWM124TG2H interface card is applicable to multiple H3C switch models. For the
interface card compatibility with switches, contact H3C Support or marketing staff.
LSWM124TG2H接口模块扩展卡适用于H3C多款交换机产品，关于LSWM124TG2H接口模块扩展
卡的适配情况，请咨询H3C公司市场人员或技术支持人员。
The LSWM124TG2H interface card provides 24 SFP28 ports and two QSFP28 ports.
LSWM124TG2H接口模块扩展卡对外提供24个SFP28口和2个QSFP28口。
SFP28 port
SFP28口QSFP28 port QSFP28口
SFP28 port LED
SFP28口状态指示灯 QSFP28 port LED
QSFP28口状态指示灯
Ejector lever
扳手 Latch 锁闩
Ports
BOM: 3101A0LL

Transceiver modules available for the QSFP28 ports QSFP28 口支持的光模块
Model
对外型号
Central wavelength
中心波长
(nm)
Connector
接口连接器
Cable
specifications
接口线缆规格
Modal
bandwidth
模式带宽
(MHz*km)
Max
transmission
distance
最大传输距离
QSFP28 transceiver modules QSFP28 光模块
QSFP-10
0G-ER4L-
WDM130
0
Four lanes
四条通道：
•1294.53 to 1296.59
•1299.02 to 1301.09
•1303.54 to 1305.63
•1308.09 to 1310.19
LC 9/125µm SMF N/A
40 km
(24.85 miles)
QSFP-10
0G-SR4-
MM850 850
MPO (PC
polished,
12-fiber) MPO
（PC端面，12
芯）
50/125µm MFF
2000 70 m
(229.66 ft)
4700 100 m
(328.08 ft)
QSFP-10
0G-PSM4
-SM1310 1295 to 1325
MPO (APC
polished,
12-fiber) MPO
（APC端面，
12
芯）
9/125µm SMF N/A 500 m
(1640.42 ft)
QSFP-10
0G-LR4-
WDM130
0
Four lanes
四条通道：
•1295
•1300
•1304
•1309
LC 9/125µm SMF N/A
10 km
(6.21 miles)
QSFP-10
0G-LR4L-
WDM130
0
Four lanes
四条通道：
•1264.5 to 1277.5
•1284.5 to 1297.5
•1304.5 to 1317.5
•1324.5 to 1337.5
LC 9/125µm SMF N/A
2 km
(1.24 miles)
QSFP-10
0G-SWD
M4-MM85
0
Four lanes:
四条通道：
•850
•880
•910
•940
LC 50/125µm MFF
2000 75 m
(246.06 ft)
4700 100 m
(328.08 ft)

Transceiver modules available for the QSFP28 ports QSFP28 口支持的光模块
Model
对外型号
Central wavelength
中心波长
(nm)
Connector
接口连接器
Cable
specifications
接口线缆规格
Modal
bandwidth
模式带宽
(MHz*km)
Max
transmission
distance
最大传输距离
QSFP+ transceiver modules QSFP+光模块
QSFP-40
G-SR4-M
M850 850
MPO (PC
polished,
12-fiber) MPO
（PC端面，12
芯）
50/125µm MFF 2000 100 m
(328.08 ft)
4700 150 m
(492.12 ft)
QSFP-40
G-CSR4-
MM850 850
MPO (PC
polished,
12-fiber) MPO
（PC端面，12
芯）
50/125µm MFF 2000 300 m
(984.25 ft)
4700 400 m
(1312.33 ft)
QSFP-40
G-LR4-P
SM1310 1310
MPO (APC
polished,
12-fiber) MPO
（APC端面，
12
芯）
9/125µm SMF N/A 10 km
(6.21 miles)
QSFP-40
G-BIDI-S
R-MM850 850 LC 50/125µm MFF 2000 100 m
(328.08 ft)
4700 150 m
(492.12 ft)
QSFP-40
G-LR4-W
DM1300
Four lanes
四条通道：
•1271
•1291
•1311
•1331
LC 9/125µm SMF N/A
10 km
(6.21 miles)
QSFP-40
G-LR4L-
WDM130
0
2 km
(1.24 miles)
Cables available for the QSFP28 ports QSFP28 口支持的线缆
Model 对外型号 Cable length 线缆长度 Data rate 传输速率 Cable type 线缆类型
QSFP28 cables QSFP28 线缆
QSFP-100G-D-CAB-1M 1 m (3.28 ft)
100 Gbps QSFP28 copper
cable
QSFP28电缆
QSFP-100G-D-CAB-3M 3 m (9.84 ft)
QSFP-100G-D-CAB-5M 5 m (16.40 ft)
QSFP-100G-D-AOC-7M 7 m (22.97 ft)
100 Gbps QSFP28 fiber cable
QSFP28光缆
QSFP-100G-D-AOC-10M 10 m (32.81 ft)
QSFP-100G-D-AOC-20M 20 m (65.62 ft)
QSFP28 to SFP28 cables QSFP28 to SFP28 线缆
QSFP-100G-4SFP-25G-CAB-
1M 1 m (3.28 ft) 100 Gbps
QSFP28 to SFP28
copper cable
QSFP28 to SFP28电
缆
QSFP-100G-4SFP-25G-CAB-
3M 3 m (9.84 ft)

Cables available for the QSFP28 ports QSFP28 口支持的线缆
Model 对外型号 Cable length 线缆长度 Data rate 传输速率 Cable type 线缆类型
QSFP+ cables QSFP+线缆
LSWM1QSTK0 1 m (3.28 ft)
40 Gbps QSFP+ copper cable
QSFP+电缆
LSWM1QSTK1 3 m (9.84 ft)
LSWM1QSTK2 5 m (16.40 ft)
QSFP-40G-D-AOC-7M 7 m (22.97 ft)
40 Gbps QSFP+ fiber cable
QSFP+光缆
QSFP-40G-D-AOC-10M 10 m (32.81 ft)
QSFP-40G-D-AOC-20M 20 m (65.62 ft)
QSFP+ to SFP+ cables QSFP+ to SFP+线缆
LSWM1QSTK3 1 m (3.28 ft)
40 Gbps QSFP+ to SFP+
copper cable
QSFP+ to SFP+电缆
LSWM1QSTK4 3 m (9.84 ft)
LSWM1QSTK5 5 m (16.40 ft)
Transceiver modules available for the SFP28 ports SFP28 口支持的光模块
Model
对外型号
Central
wavelength
中心波长
Connector
接口连接器
Cable
specifications
接口线缆规格
Modal
bandwidth
模式带宽
(MHz*km)
Max transmission
distance
最大传输距离
SFP28 transceiver modules SFP28 光模块
SFP-25G-SR-
MM850 850 nm LC 50/125 µm
MFF
2000
FEC negotiation
disabled: 30 m
(98.43 ft)
FEC negotiation
enabled: 70 m
(229.66 ft)
关闭FEC协商功能时：
30 m
开启FEC协商功能时：
70 m
4700
FEC negotiation
disabled: 40 m
(131.23 ft)
FEC negotiation
enabled: 100 m
(328.08 ft)
关闭FEC协商功能时：
40 m
开启FEC协商功能时：
100 m
For more information about FEC negotiation, see Ethernet interfaces in Layer 2 –LAN Switching
Configuration Guide.有关FEC协商功能的详细介绍，“二层技术-以太网交换配置指导”中的“以太网接口”。

Transceiver modules available for the SFP28 ports SFP28 口支持的光模块
Model
对外型号
Central
wavelength
中心波长
Connector
接口连接器
Cable
specifications
接口线缆规格
Modal
bandwidth
模式带宽
(MHz*km)
Max transmission
distance
最大传输距离
SFP+ transceiver modules SFP+光模块
SFP-XG-SX-
MM850-A 850 nm LC
50/125 µm
MFF
2000 300 m (984.25 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
62.5/125 µm
MFF 200 33 m (108.27 ft)
160 26 m (85.30 ft)
SFP-XG-LX-S
M1310 1310 nm LC 9/125 µm SMF N/A 10 km (6.21 miles)
SFP transceiver modules SFP 光模块
SFP-GE-T N/A RJ-45 双绞线 N/A 100m (328.08 ft)
SFP-GE-SX-M
M850-A 850 nm LC
50/125µm MFF 500 550m (1804.46 ft)
400 500m (1640.42 ft)
62.5/125µm
MFF 200 275m (902.23 ft)
160 200m (656.17 ft)
SFP-GE-LX-S
M1310-A 1310 nm LC
9/125µm SMF N/A 10km (6.21 miles)
50/125µm MFF 500/400 550m (1804.46 ft)
62.5/125µm
MFF 500 550m (1804.46 ft)
SFP-GE-LH40
-SM1310 1310 nm LC 9/125µm SMF N/A 40km (24.86 miles)
SFP-GE-LH40
-SM1550 1550 nm LC 9/125µm SMF N/A 40km (24.86 miles)
SFP-GE-LH80
-SM1550 1550 nm LC 9/125µm SMF N/A 80 km (49.71 miles)
Cables available for the SFP28 ports SFP28 口支持的线缆
Model 对外型号 Cable length 线缆长度 Data rate 传输速率 Cable type 线缆类型
SFP28 cables SFP28 线缆
SFP-25G-D-CAB-1M 1 m (3.28 ft) 25 Gbps SFP28 copper cable
SFP28电缆
SFP-25G-D-CAB-3M 3 m (9.84 ft)
SFP+ cables SFP+线缆
LSWM1STK 0.65 m (2.13 ft)
10 Gbps SFP+ copper cable
SFP+电缆
LSWM2STK 1.2 m (3.94 ft)
LSWM3STK 3 m (9.84 ft)
LSTM1STK 5 m (16.40 ft)

Cables available for the SFP28 ports SFP28 口支持的线缆
Model 对外型号 Cable length 线缆长度 Data rate 传输速率 Cable type 线缆类型
SFP-XG-D-AOC-7M 7 m (22.97 ft)
10 Gbps SFP+ fiber cable
SFP+光缆
SFP-XG-D-AOC-10M 10 m (32.81 ft)
SFP-XG-D-AOC-20M 20 m (65.62 ft)
QSFP28 port LED QSFP28 口状态指示灯
LED Status 指示灯状态 Description 指示灯含义
Steady green
绿色常亮
A transceiver module is installed in the port. The port is operating at 100
Gbps, and a link is present on the port.
模块已安装，端口工作在100G模式下，并且端口Link Up
Flashing green
绿色闪烁 The port is sending or receiving data at 100 Gbps. 端口工作在100G模式下，
正在接收或发送数据
Steady yellow
黄色常亮
A transceiver module is installed in the port. The port is operating at 10/25/40
Gbps, and a link is present on the port. 模块已安装，端口工作在10G、25G或
40G模式下，并且端口Link Up
Flashing yellow (3 Hz)
黄色闪烁(3Hz) The port is sending or receiving data at 10/25/40 Gbps. 端口工作在10G、25G
或40G模式下，正在接收或发送数据
Off
灯灭 No transceiver module is installed in the port, or no link is present on the port.
模块没有安装或端口没有Link Up
SFP28 port LED SFP28 口状态指示灯
LED Status 指示灯状态 Description 指示灯含义
Steady green
绿色常亮
A transceiver module is installedin the port. The port is operating at 25 Gbps,
and a link is present on the port.
模块已安装，端口工作在25G模式下，并且端口Link Up
Flashing green
绿色闪烁 The port is sending or receiving data at 25 Gbps. 端口工作在25G模式下，正在接收或发送数据
Steady yellow
黄色常亮
A transceiver module is installedin the port. The port is operating at 10 Gbps,
and a link is present on the port.
模块已安装，端口工作在10G模式下，并且端口Link Up
Flashing yellow (3 Hz)
黄色闪烁(3Hz) The port is sending or receiving data at 10 Gbps. 端口工作在10G模式下，
正在接收或发送数据
Off
灯灭 No transceiver module is installed in the port, or no link is present onthe port.
模块没有安装或端口没有Link Up

Installing the card 接口模块扩展卡的安装
Remove the filler panel (if any) from the target slot before installing the card. Keep the
removed filler panel secure for future use. 如果交换机的接口模块扩展卡插槽上装有假
面板，请先将假面板拆除再进行接口模块扩展卡的安装，并请妥善保存拆卸下的假面板
以备将来使用。
Installing and removing the card
Before you install or remove the card, wear an ESD wrist strap and make sure the
strap makes good skin contact and is reliably grounded.
在安装和拆卸过程中，操作者需自行准备并佩戴防静电腕带，请确保防静电腕带已经
正确接地并与皮肤良好接触。
To avoid device damage, do not use excessive force when you install or remove the
card. 在安装和拆卸过程中，请不要用力过猛，以免对设备器件造成损坏。
Safety precautions 安全注意事项
!
1
2
12
3
The LSWM124TG2H interface card is hot swappable. However, do not install or
remove it during the startup of the switch.接口模块扩展卡在适配的产品上均支持热插
拔，但是请勿在交换机启动过程中安装或拆卸扩展卡。
①Unpack the card. Press the latch on the card to release the ejector lever.
从包装袋中取出接口模块扩展卡，并按压锁闩使扳手弹出。
②Insert the card slowly into the slot along the guide rails.
将接口模块扩展卡沿着插槽导轨水平缓慢地推进接口模块扩展卡插槽。
③Rotate inward the ejector lever until the latch locks the ejector lever in place.
将扳手用力向内扣合，此时锁闩自动卡住扳手。
Removing the card 接口模块扩展卡的拆卸
To avoid cable damage, remove the cables from the card before removing the card.
在拆卸接口模块扩展卡之前，推荐您先将接口模块扩展卡上的线缆拔出，以免在拆卸
过程中对线缆造成损坏。
If you are not to install a new card after removing the original one, install a filler panel
in the slot to prevent dust and ensure good ventilation in the device. 若接口模块扩
展卡拆卸完成后无须安装新的接口模块扩展卡，请您及时安装假面板，以保证设备的
良好通风散热并防止灰尘进入设备。
!
3

Installing transceiver modules and cables 光模块或线缆的安装与拆卸
For the installation and removal procedure for transceiver modules and cables, see H3C
Transceiver Modules and Network Cables Installation Guide at www.h3c.com.
光模块和线缆的安装与拆卸，请您参见H3C网站发布的《H3C光模块及线缆 安装指导》
中的相关内容。
4
1
2
3
Place the removed card on an anti-static mat or in an anti-static bag. 请将拆卸下来的
接口模块扩展卡及时放置到防静电垫子上或防静电袋中。
!
①Press the latch on the card to release the ejector
lever. 按压接口模块扩展卡上的锁闩使扳手弹出。
②Hold the ejector lever to pull the card outward until the
card is disconnected from the connectors.拉动扳手使
接口模块扩展卡与设备内连接器端子脱离。
③Hold the card with both hands and take it out slowly.用
双手水平缓慢地取出接口模块扩展卡。
Verifying the installation
After the installation is complete, determine whether the card is operating correctly.
If the card fails to operate correctly, perform the following steps:
Reinstall the card following the installation procedures described in this document.
If the issue persists, contact H3C Support.
全部安装完成后，在交换机运行正常的情况下，若发现接口模块扩展卡无法正常工作：
您可以按照手册中介绍的方法重新安装接口模块扩展卡。
如果重新安装后，接口模块扩展卡仍无法正常工作，请您联系H3C技术支持人员。
