Harbor Breeze L0982 User manual

Harbor Breeze®is a registered trademark
of LF, LLC. All Rights Reserved.
ITEM #0396772
MODEL #L0982
TWIN BREEZE II CEILING
FAN
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5
p.m., EST, Friday.
1
Español p. 20
ATTACH YOUR RECEIPT HERE
Serial Number
EB14427
Purchase Date
Lowes.com/harborbreeze

TABLE OF CONTENTS
2
Preparation ........................................................................................................................
Initial Instructions ...............................................................................................................
Wiring Instructions .............................................................................................................
Final Instruction ................................................................................................................
Operating Instructions ......................................................................................................
Care and Maintenance .....................................................................................................
Limited Lifetime Warranty .................................................................................................
Troubleshooting ................................................................................................................
Replacement Parts List ....................................................................................................
Safety Information .............................................................................................................
Package Contents .............................................................................................................
Hardware Contents ............................................................................................................
4
3
4
5
6
9
10
16
17
17
18
19
Lowes.com/harborbreeze

PACKAGE CONTENTS
3
A 1
1
1
6
6
2
2
1
1
1
1
1
B
C
D
F
G
Mounting Bracket
Downrod Assembly
Canopy
Top Housing
(Preassembled on
Motor Body (G))
Motor Body
Canopy Cover
E Coupling Cover
QUNTITYDESCRIPTIONPART
H
I
Blade Iron
Blade
J Fan Switch Cover
K
Fan Finial
L Light Kit
Lowes.com/harborbreeze
2M Bulb
1
1
N
O
P
Glass Shade
Light Finial Cap
Light Finial 1
2
Q
Switch Housing
(preassembled on Motor Body (G))
1R
Bottom Housing
(preassembled on Motor Body (G))
T 1Balance Kit
U 1
Clevin Pin
(preassembled on Motor Body (G))
V1
Hairpin Clip
(preassembled on Motor Body (G))
S 1Light Switch Cover
QUNTITYDESCRIPTIONPART
A
B
C
D
ET
S
K
J
Q
V
U
F
G
R
L
M
N
H
I
P
O

4
HARDWARE CONTENTS (Not shown actual size)
Lowes.com/harborbreeze
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the product.
. All electrical connections must comply with local codes, ordinances or the National Electric Code (NEC).
Contact your municipal building department to inquire about your local codes, permits and/or inspections.
. Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse
or by removing th fuse or by switching off circuit breaker.
. Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
Never use a fixture in a two-wire system that is not grounded.
. If you are not sure your lighting system has a grounding means, do not attempt to install this fixture. Contact
a qualified, licensed electrician for information regarding proper grounding methods as required by the local
electrical code in your area.
. Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the floor
and at least 30 in. from the ends of the blades to any obstruction.
. If a dimmer control switch is used with this fixture, obtain professional advice to determine the correct type
and electrical rating required.
. The lighting fixture must be positioned so there is at least 1.64 ft. between the bulb and any illuminated
surface.
. For supply connections, if the conductor of a fan is identified as a grounded conductor, then it should be
connected to a grounded conductor power supply. If the conductor of a fan is identified as an ungrounded
conductor, then it should be connected to an ungrounded conductor power supply. If the conductor of a fan
is identified for equipment grounding, then it should be connected to an equipment-grounding conductor.
. Installing a fixture into an electrical system without a proper grounding means could allow metal parts of the
fixture to carry electrical currents. If any of the fixture wires, wire connections or splices are broken, cut or
loose during the mounting or normal operation of the fixture, under such conditon, anyone coming in contact
with the fixture is subject to electrical shock, which could cause serious injury or death.
. Connection of the bare or green fixture ground wire to the black or white house wires may allow metal parts
of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will
receive electrical shock, which could cause serious injury or death.
. Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires
to have contact with any surface having a sharp edge. Doing so may damage or cut the wire insulation,
which could cause serious injury or death from electric shock.
DANGER
AA CC DD
Wire Nut
Qty. 4
Blade Screw
Qty. 18 + 1 Extra Motor Screw
Qty. 7 + 6 Extra Fob
Qty. 2
BB

WARNING
CAUTION
PREPARATION
. Risk of fire. Most dwellings built before 1985 have supply wire rated for 140°F. Consult a qualified
electrician before installation.
. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed device
or variable speed control.
. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,
balancing or cleaning the fan.
. Do not insert foreign objects in between rotating fan blades.
. Do not install or use the fan if any part is damaged or missing.
. Before servicing or cleaning the unit, switch power off at the service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag,
to the service panel.
. Do not use bulbs having a wattage greater than the maximum value stated on the fixture and in this
manual. Using a higher wattage bulb than specified will increase fixture temperature and increase
risk of fire.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
. To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked
'ACCEPTABLE FOR FAN SUPPORT OF 35 LBS OR LESS' and use mounting screws provided
with the outlet box and/or support directly from building structure. Most outlet boxes commonly
used for the support of luminaries are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly (not included): Philips Screwdriver, Step Ladder, Tape, Pliers and Wire
Cutters.
5
Lowes.com/harborbreeze

1
6
INITIAL INSTRUCTIONS
1. Turn off circuit breakers and wall switch to the fan supply
line leads.
Lowes.com/harborbreeze
2b. It is required at least 30 inch from blade tip to nearest
wall or obstruction. Check downrod length to ensure 7
feet from bottom edge of blade to the floor.
A. Standard Mounting: Standard mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings you
may want to use a longer downrod (not included).
B. Angle Mounting: Angle-style mounting is best
suited for angled or vaulted ceilings. A longer downrod
is sometimes necessary to ensure proper blade
clearance. If using the angle mount, make sure the
ceiling angle is not steeper than 20°.
2a. Choose the desired mounting method:
Note: Flushmount and closemount options are not
available for this item.
DANGER: Failure to disconnect power supply prior to
installation may result in serious injury or death.
A
B
2a
7 ft. MIN.
30 IN. MIN.
2b

7
3. Check existing outlet box (not included) to ensure it is
securely fastened to at least two points in a structural
ceiling member and can support the full weight of the
fan. Once verified, install mounting bracket (A) to the
outlet box using the screws and washers provided with
the outlet box.
INITIAL INSTRUCTIONS
Lowes.com/harborbreeze
4. Remove the motor body (G) from the protective plastic
bag and take the lower packing pad out of the carton.
Place the motor body (G) into the packing pad with the
bottom of each motor facing up. Remove the motor
screws (CC) and motor blocks from each motor of motor
body (G). Discard motor blocks and save the motor
screws (CC) for later use.
Hardware Used
x 6
CC
Motor Screw
5. Remove hairpin clip (V) and clevis pin (U) from the top
housing (F) preassembled to motor body (G). Retain for
later use.
3
Open End
A
A
Note: If using the angel mount, make sure open end of
mounting bracket (A) is installed facing the higher point
of the ceiling.
Note: Make sure to keep loose hardware separate to
avoid confusion during installation
Note: Make sure to keep loose hardware separate to
avoid confusion during installation.
Loosen the two screws preassembled in coupling on top
housing (F), but do not remove them.
DANGER: A loose outlet box can cause the fan to
wobble and increase the fan's potential to fall, which
could result in serious injury or death.
4
Motor Block
CC
VU
G
F
U
Screw
5

6 to 9 in
8
8
INITIAL INSTRUCTIONS
Lowes.com/harborbreeze
7. Feed power wires from motor body (G) through downrod
assembly (B), then insert downrod assembly (B) into the
coupling on top housing (F).
Align the hole on downrod assembly (B) to hole on
coupling, then re-install clevis pin (U). Re-attach hairpin
clip (V) into clevis pin (U) until it snaps into place, then
tighten the two previously loosened screws on coupling.
8. Cut off excess fixture wires, leaving approximately 6 to 9
inches above the top of the downrod assembly (B). Strip
1/2 inch insulation from the end of each fixture wire.
C
CAUTION: Ensure all screws are tight before moving
onto the next step.
B
C
D
E
6
6. Place downrod assembly (B) through canopy (C),
canopy cover (D) and coupling cover (E).
B
F
V
U
G
7
Screw

9
Lowes.com/harborbreeze
INITIAL INSTRUCTIONS
WIRING INSTRUCTIONS
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse
box before hanging.
WARNING: If you are not sure if the outlet box is grounded, contact a licensed electrician for
advice, as it must be grounded for safe operation.
1. Connect the GREEN wires from the hanger ball of
downrod assembly (B) and mounting bracket (A) to the
supply ground (GREEN or bare color). Securely connect
wires using wire connector (AA) supplied.
WARNING: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine proper wiring.
WARNING: If you feel that you do not have enough electrical wiring knowledge or experience,
have your fan installed by a licensed electrician.
9
A
B
9. Carefully lift the assembly and rest the hanger ball of
downrod assembly (B) on the mounting bracket (A)
attached to the outlet box.
NOTE: Unlike a standard circular fan, the mounting
bracket (A) for this item does not have a tab, which
locks the fan into a specific position. This allows you
the freedom to rotate the fan's linear motor housing
360°so it can be correctly oriented with the layout of
your room.
Hardware Used
x 1
AA
Wire Connector
A
B
AA
1
Supply
Ground Wire
Green Wire
from A
Green Wire from
Hanger Ball

WIRING INSTRUCTIONS
FINAL INSTRUCTIONS
10
1. Loosen but do not remove the two preassembled
mounting screws on mounting bracket (A). Lift canopy
(C) up and align the keyholes on the bottom of canopy
(C) with mounting screws on mounting bracket (A), then
twist canopy (C) clockwise. Tighten mounting screws
securely.
Lowes.com/harborbreeze
1
A
C
2. Securely connect the fan WHITE wire to the supply
WHITE wire using wire connector supplied. Securely
connect the fan BLACK and BLUE wires to the supply
BLACK wire using wire connector supplied.
3. Wrap electrical tape (not included) around each wire
connector and make sure no bare wire or wire strands
are visible after making connections.
Then, turn wires upward and carefully push them into
the outlet box; make sure the WHITE and GREEN
connections are on one side and the BLACK connections
are on the other side.
Hardware Used
x 2
AA
Wire Connector
2
Black
Fan Wire
Blue
Fan Wire
BLACK
GREEN
WHITE
White
Fan Wire
AA
B
3
BLACK
BLUE
WHITE
GREEN
Outlet Box