Herman Miller Nelson Bench User manual

How to assemble
your bench.
HermanMiller
The Collection
NelsonTM Bench Installation
For more information about our products and services or to see a list of dealers, please visit us at
hermanmiller.com or call [phone].
© 2013 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1b9l4t - C.
TM Y, Nelson are among the trademarks of Herman Miller, Inc.
Bench Assembly 3/4” Long pan head
machine screw (2)
#2 Phillips Screwdriver
Parts Included
A B
Tools required
Warning:
Failure to fully tighten screws may cause injury by
causing bench to collapse. Tighten screws until
they stop plus a quater turn.
1.2
Pivot leg assemblies up.
Step 2
1.1
Lay bench assembly (A) top side down on a clean surface.
Step 1
2.1
Align holes in V brackets with metal insert in bench slats.
HermanMiller NelsonTM Bench Assembly Instructions1

HermanMiller NelsonTM Bench Assembly Instructions2
3.1
Insert machine screws (B) into each leg assembly. Tighten screws.
Step 3
4.1
Place table in upright position.
Step 4