Hioki LR8400-20 User manual

LR8400-20
LR8401-20
LR8402-20
MEMORY HiLOGGER
July 2014 Revised edition 7 LR8400B980-07 14-07H
Instruction Manual

LAN communication is available with HiLogger firmware version 1.20 and later.
(The release date for version 1.20 is June, 2010.)
The HiLogger firmware version is displayed at the upper right on the System screen.
The latest version can be downloaded from Hioki’s website.
Please visit our company’s website or contact your dealer or Hioki representative for the
version upgrade procedure.
HiLogger Firmware Version Information and Upgrades

Contents
i
Contents
Introduction ..............................................................................1
Confirming Package Contents................................................2
Safety Information....................................................................3
Operating Precautions.............................................................6
Chapter 1
Overview ____________________________________13
1.1 Product Overview and Features .............................13
1.2 Measurement Flow ..................................................14
1.3 Names and Functions of Parts, Screen 
Configurations .........................................................16
1.4 Basic Operation .......................................................22
Screen Operations (changing settings, scrolling waveforms, 
and displaying values) ......................................................22
Starting and Stopping Measurement ................................23
Disabling Key Operations (Key-Lock Function) ...............25
Performing Zero Adjustment ............................................25
Saving Data ......................................................................25
Confirming Inputs (Monitor) ..............................................26
Chapter 2
Measurement Preparations_________________27
2.1 Attaching Expansion Input Units (as needed) ......28
2.2 Using the Battery Pack (Option) ............................30
Install the Battery Pack ....................................................30
Charge the Battery Pack ..................................................31
2.3 Connecting the AC Adapter ....................................32
2.4 Making Connections ...............................................33
Pre-Connection Inspection ...............................................33
Voltage and Thermocouple Temperature Measurement .34
Temperature Measurement with a Resistance Temperature 
Detector (RTD) .................................................................36
Humidity Measurement ....................................................37
Resistance Measurement ................................................39
Pulse Measurement .........................................................40
1
2

Contents
ii
Connecting Alarm Outputs ...............................................41
+12 V Output Connection (for external sensors) ..............42
External Control (using TRIG OUT and EXT TRIG) ........43
2.5 Turning the Power On and Off ............................... 44
2.6 Inserting a CF Card or USB Flash Drive 
(when saving data) ................................................. 45
CF Card Insertion & Removal ..........................................46
USB flash drive Insertion & Removal ...............................46
Formatting a CF Card/USB flash drive ............................47
2.7 Compensating for Input Circuit Offset 
(Zero Adjustment) ................................................... 48
Chapter 3
Settings_____________________________________ 49
3.1 Setting Flow Overview ........................................... 49
3.2 Configuring Measurement Settings ...................... 50
Time Setting by Key Operations ......................................50
3.3 Input Channel Settings ........................................... 53
Key Setting Procedure .....................................................53
Voltage Measurement Settings ........................................55
Temperature Measurement Settings (using thermocouples) 56
Temperature Measurement Settings (for RTDs) .............58
Humidity Measurement Settings ......................................59
Resistance Measurement Settings ..................................60
Pulse or Logic Measurement Settings .............................61
Integration (Count) Measurement Settings ......................62
Revolution Measurement Settings ...................................63
3.4 Data Saving Settings .............................................. 64
3.5 Waveform Display Settings (as needed) .............. 65
Key Setting Procedure .....................................................65
Selecting Waveform Display Color ..................................65
Specifying Vertical Display Range by Magnification and 
Zero Position (vertical axis expansion/compression) .......66
Specifying the Vertical Display Range by Upper and 
Lower Limits (expansion/compression) ............................67
Setting the Display Time Base 
(horizontal axis magnification) .........................................68
3.6 Scaling Settings (as needed) ................................. 69

Contents
iii
3.7 Entering Titles and Comments (as needed) ..........71
3.8 Suppressing Noise (Enable Digital Filtering) ........73
3.9 Viewing and Editing with the All-Channel 
Settings List .............................................................74
Batch Copying Channel Settings .....................................75
Batch Setting Waveform Display/Hide and Waveform 
Color Settings for All Channels ........................................76
Initializing Settings (to factory defaults) ............................77
Aligning Zero Positions on the Grid ..................................78
Setting CH1 of UNIT1 Value as a Scaling Value 
(Inter-Channel Compensation function) ...........................79
Chapter 4
Observing Measurements and Data ________83
4.1 Confirming Measured Values, and Starting 
Measurement ...........................................................83
4.2 Observing Waveforms ............................................85
Displaying Waveforms (Display Descriptions) .................85
Displaying Gauges ...........................................................86
Viewing Input Signals as Numerical Values .....................87
Scrolling Waveforms ........................................................88
Verifying Waveform Display Position ...............................88
Magnifying and Compressing Horizontally .......................89
Viewing Any Waveform Location (Jump Function) ..........89
Specifying a Waveform Time Span ..................................90
Displaying Cursor Values .................................................91
4.3 Marking Waveforms and Searching Marks 
(Search Function) ....................................................93
Inserting Event Marks While Viewing Waveforms ............93
Inserting Event Marks Using External Input Signals ........94
Alarm Event Marks ...........................................................95
How are event marks handled in text (CSV) conversion? 96
Searching Event Marks ....................................................97
Chapter 5
Specifying Criteria for Measurements______99
About Triggering ...............................................................99
5.1 Triggering Measurement Start and Stop .............100
4
5
3
2

Contents
iv
Types of Trigger Criteria ................................................100
Enable the Trigger Function ...........................................101
Key Setting Procedure ...................................................101
Setting Trigger Criteria ...................................................102
Selecting Triggering Criteria (Trigger Source) ...............105
Using External Triggering ..............................................106
Setting Criteria for Pre-Trigger Measuring (Pre-Trig) .....108
5.2 Alarm Output ......................................................... 109
Checking Alarm Criteria .................................................109
Alarm Settings ................................................................111
5.3 Confirming All Trigger and Alarm Criteria Settings 114
5.4 Periodic (Timer) Measurements .......................... 115
5.5 Measurement with Trigger and Timer Functions 117
5.6 Trigger Setting Examples .................................... 119
Chapter 6
Saving & Loading Data ____________________121
6.1 About Saving and Loading Data ......................... 121
What happens to data in a power outage? ....................123
Preparation for power outages during long-term 
measurements ...............................................................123
6.2 Saving Data ........................................................... 124
Automatic Saving (Waveform Data and Numerical 
Calculation Results) .............................................................125
Replacing Removable Storage During Real-Time Saving .127
Saving Manually (Waveform Data, Screen Images, 
Numerical Calculation Results) ......................................128
To Save a Setting Configuration ....................................131
6.3 Loading Data on the HiLogger ............................ 132
Loading a Setting Configuration .....................................132
Loading Waveform Data and Screen Images ................134
6.4 Data Management ................................................. 135
Switching removable storage .........................................135
Viewing Folder Contents and the Parent Folder ............135
Deleting Data .................................................................136
Renaming Files and Folders ..........................................137
Copying Data .................................................................138
Sorting Files ...................................................................139

Contents
v
6.5 Transferring Data to a PC (USB Drive Mode) ......140
Select the USB Drive Mode ...........................................140
Connecting the USB Cable ............................................141
Chapter 7
Numerical Calculations/Waveform Calculations
____________________________________________ 143
7.1 Calculate Average, Maximum, Minimum, and Etc. .143
Key Setting Procedure ...................................................144
Real-Time Calculation While Measuring (Auto Calculation) 144
Calculation after Measuring (Manual Calculation) .........146
Apply Calculations to a Specific Time Span 
(Manual Calculation Only) ..............................................147
7.2 Numerical Value Calculation Expressions ..........148
7.3 Waveform Calculations .........................................149
Key Setting Procedure ...................................................149
Chapter 8
System Environment Settings ____________ 151
Key Setting Procedure ...................................................152
8.1 Operation Settings ................................................152
Using the Auto-Resume Function 
(Resume After Power Restoration) ................................152
File Protection Level Setting ..........................................153
8.2 Screen Key Operation Settings ............................153
Enabling and Disabling the Backlight Saver ..................153
Adjust Backlight Brightness ............................................154
Selecting Black or White Screen Background ................154
Enabling or Disabling the Beeper ...................................154
Selecting the Horizontal (Time) Axis Display .................155
Selecting the Display Language .....................................155
Display of Start/Stop Confirmation Messages ................155
8.3 CSV File Saving Settings ......................................156
CSV File Data Decimal and Separator Characters ........156
Select the sort order for numerical calculation results ...156
Setting How to Handle Date Data Stored in CSV Files ..157
8.4 External Trigger Input Settings ............................157
Selecting the External Trigger Function .........................157
7
8
6
5

Contents
vi
Set Alarm Event Marking ...............................................157
8.5 Making System Settings ...................................... 158
Setting the Date and Time .............................................158
Initializing the HiLogger (System Reset) ........................159
Self-Test .........................................................................160
Chapter 9
External Control ___________________________161
9.1 External Trigger Input .......................................... 161
9.2 External Signal Output (Trigger Output) ............ 162
9.3 Alarm Signal Output (Alarm Output) ................... 163
9.4 Synchronous Measurements with 
Multiple HiLoggers ............................................... 164
Chapter 10
Connection to a PC(Communication) _____165
Communication Features ...............................................165
10.1 USB Settings and Connections ........................... 166
1. HiLogger Setting ........................................................166
2. Installing the USB Driver ............................................167
3. Connecting the HiLogger to a PC ..............................170
Features Available After USB Setting and Connection ..172
4. Installing the Logger Utility Program ..........................173
Uninstalling the Logger Utility ........................................177
10.2 LAN Settings and Connections
(Before connecting to the network) .................... 178
Things to Check Before Making Settings .......................178
1. PC Network Setup .....................................................180
2. HiLogger Settings ......................................................181
3. Connecting the HiLogger to a PC ..............................184
Features Available After LAN Setting and Connection ..185
When LAN Communication Fails ...................................186
10.3 Using the Logger Utility ...................................... 187
Starting and Ending Logger Utility .................................187
10.4 Remote Measurement with the HTTP Server 
Function ................................................................. 188
Displaying the Main Page ..............................................188

Contents
vii
Remote Operating ..........................................................189
Start/Stop Measurement ................................................190
Viewing Current Measurement Values ...........................190
Acquiring Data from Internal Memory ............................191
Setting Comments ..........................................................192
10.5 Transferring Data to a PC with the FTP Server 
Function .................................................................193
Restricting FTP Server Connections (FTP Authentication) 195
10.6 Auto Sending Data using the FTP Client Function 196
Setting Up an FTP Server on a PC ................................197
HiLogger Auto-Send Settings .........................................211
Testing File Transfer ......................................................214
Checking Communication Status ...................................215
10.7 Sending E-Mail .......................................................216
HiLogger E-Mail Settings ...............................................217
Testing E-Mailing ...........................................................220
Checking Mail Communication Status ...........................221
E-Mail Sending Authentication .......................................222
10.8 About Communications Commands ...................223
Configuring Communications Command Operation .......223
Chapter 11
Specifications_____________________________ 225
11.1 LR8400-20, LR8401-20, LR8402-20 Memory 
HiLogger Specifications .......................................225
11.2 LR8500 Voltage/Temp Unit Specifications ..........240
11.3 LR8501 Universal Unit Specifications .................241
Chapter 12
Maintenance and Service_________________ 243
12.1 Inspection, Repair, and Cleaning .........................243
12.2 Troubleshooting ....................................................244
12.3 Disposing of the HiLogger ....................................246
Removing the Lithium Battery ........................................246
12
11
10
Appendix
Index
9
8

Contents
viii
Appendix____________________________________ A1
Appendix 1 Scan Timing .....................................................A1
Appendix 2 Error Messages and Remedial Actions.........A2
Appendix 3 File Naming ......................................................A8
Appendix 4 Text File Internal Format.................................A9
Appendix 5 Binary File Size Calculation..........................A10
Appendix 6 List of Default Settings..................................A11
Appendix 7 Maximum Recordable Time ..........................A12
Appendix 8 Concerning Noise Countermeasures ..........A13
Appendix 9 Frequently Asked Questions........................A19
Installation and Settings ..................................................A19
Triggering ........................................................................A21
Measuring .......................................................................A21
Data Saving ....................................................................A23
Logger Utility ...................................................................A25
Appendix 10Introduction to Measurement ApplicationsA26
Measuring Electrical Energy by Pulse Count ..................A26
Connect a 4-20 mA output device and record the average 
value every minute ..........................................................A28
Appendix 11Input Circuit Diagram ...................................A30
Index___________________________________Index 1

Introduction
1
Thank you for purchasing the Hioki Model LR8400-20, LR8401-20, LR8402-20 Mem-
ory HiLogger.To obtain maximum performancefrom the HiLogger, please read this
manual first, and keep it handy for future reference.
The following documents are provided with this HiLogger. Refer to them as appro-
priate for your application.The following documents are provided with this HiLog-
ger. Refer to them as appropriate for your application.
• Windows is a registered trademark of Microsoft Corporation in the
United States and/or other countries.
• CompactFlash is a registered trademark of Sandisk Corporation
(USA).
• Sun, Sun Microsystems, Java, and any logos containing Sun or Java
are trademarks or registered trademarks of Sun Microsystems, Inc. in
the United States and other countries.
Introduction
Document Description
1Measurement
Guide
Read first.
Offers an introduction to the HiLogger’s basic measuring method for
first time users.
2Instruction Manual
(This document) Contains explanation and instructions regarding the HiLogger's oper-
ating method and functions.
Registered Trademarks

Confirming Package Contents
2
When you receive the HiLogger, inspect it carefully to ensure that no damage
occurred during shipping. In particular, check the accessories, panel switches, and
connectors. If damage is evident, or if it fails to operate according to the specifica-
tions, contact your dealer or Hioki representative.
Contact your dealer or Hioki representative for details.
Confirming Package Contents
Options
Confirm that these contents are provided.
LR8400-20, LR8401-20, LR8402-20
Memory HiLogger* .......................... 1
9418-15 AC Adapter......................... 1
with supplied power cord
(p. 32)
Instruction manual (This document)1
Measurement guide..........................1
USB Cable.........................................1
Logger Utility(Data acquisition appli-
cation program CD)..........................1
(p. 141)
The latest version can be down-
loaded from our web site.
*: LR8400 (with two Model LR8500 Voltage/Temp Unit)
LR8401 (with two Model LR8501 Universal Unit)
LR8402 (with combined units, and UNIT1 is an LR8501 Universal Unit)
LR8500 Voltage/Temp Unit
LR8501 Universal Unit
Z1000 Battery Pack
9418-15 AC Adapter
9642 LAN Cable
Z2000 Humidity Sensor
9727 PC Card (256MB)
9728 PC Card (512MB)
9729 PC Card (1GB)
9830 PC Card (2GB)
C1000 Carrying Case
Z5000 Fixed Stand

Safety Information
3
This manual contains information and warnings essential for safe operation of the
HiLogger and for maintaining it in safe operating condition. Before using it, be sure
to carefully read the following safety precautions.
The following symbols in this manual indicate the relative importance of
cautions and warnings.
Safety Information
This HiLogger is designed to comply with IEC 61010 Safety Stan-
dards, and has been thoroughly tested for safety prior to shipment.
However, mishandling during use could result in injury or death, as
well as damage to the HiLogger. Using the HiLogger in a way not
described in this manual may negate the provided safety features.
Be certain that you understand the instructions and precautions in
the manual before use. We disclaim any responsibility for accidents
or injuries not resulting directly from HiLogger defects.
Safety Symbols
In the manual, the symbol indicates particularly important infor-
mation that the user should read before using the HiLogger.
The symbol printed on the HiLogger indicates that the user should
refer to a corresponding topic in the manual (marked with the sym-
bol) before using the relevant function.
Indicates a double-insulated device.
Indicates a grounding terminal.
Indicates DC (Direct Current).
Indicates AC (Alternating Current).
Indicates the ON side of the power switch.
Indicates the OFF side of the power switch.
Indicates that incorrect operation presents an extreme hazard
that could result in serious injury or death to the user.
Indicates that incorrect operation presents a significant hazard
that could result in serious injury or death to the user.
Indicates that incorrect operation presents a possibility of injury
to the user or damage to the HiLogger.
Indicates advisory items related to performance or correct
operation of the HiLogger.

Safety Information
4
Accuracy
We define measurement tolerances in terms of f.s. (full scale), rdg. (reading) and dgt.
(digit) values, with the following meanings:
Symbols for Various Standards
This symbol indicates that the product conforms to regulations set out by the EC
Directive.
This is a recycle mark established under the Resource Recycling Promotion Law
(only for Japan).
WEEE marking:
This symbol indicates that the electrical and electronic appliance is put on the EU
market after August 13, 2005, and producers of the Member States are required to
display it on the appliance under Article 11.2 of Directive 2002/96/EC (WEEE).
Ni-MH
Other Symbols
Indicates the prohibited action.
(p. ) Indicates the location of reference information.
*Indicates that descriptive information is provided below.
[ ] The names of setting objects and buttons on the screen are indicated by square
brackets [ ].
SET
(Bold
charac-
ters)
Bold characters within the text indicate operating key labels.
• Unless otherwise specified, “Windows” represents Windows 2000, Windows XP, Windows
Vista, or Windows 7.
• Dialog box represents a Windows dialog box.
• Click: Press and quickly release the left button of the mouse.
• Double click: Quickly click the left button of the mouse twice.
f.s. 
(maximum display value or
scale length)
The maximum displayable value or scale length. This is usually the
name of the currently selected range. Example: For the 1 V range,
f.s. = 1 V
rdg. 
(reading or displayed value) The value currently being measured and indicated on the measur- ing instrument.
dgt. 
(resolution)
The smallest displayable unit on a digital measuring instrument,
i.e., the input value that causes the digital display to show a "1" as
the least-significant digit.

Safety Information
5
Measurement categories
This HiLogger complies with CAT II (300 VAC, DC) safety requirements.
To ensure safe operation of measurement instruments, IEC 61010 establishes safety
standards for various electrical environments, categorized as CAT II to CAT IV, and called
measurement categories.
Using a measurement instrument in an environment designated with a higher-numbered
category than that for which the instrument is rated could result in a severe accident, and
must be carefully avoided.
Use of a measurement instrument that is not CAT-rated in CAT II to CAT IV measurement
applications could result in a severe accident, and must be carefully avoided.
Difference between "Measurement" and "Recording"
The measurement and recording processes are distinguished as follows for the purposes
of these instructions.
Measured data (data acquired in internal memory) is erased whenever a new measure-
ment starts. To retain data, always record (save) it.
CAT II: Primary electrical circuits in equipment connected to an AC electrical outlet by a
power cord (portable tools, household appliances, etc.)
CAT II covers directly measuring electrical outlet receptacles.
CAT III: Primary electrical circuits of heavy equipment (fixed installations) connected
directly to the distribution panel, and feeders from the distribution panel to outlets.
CAT IV: The circuit from the service drop to the service entrance, and to the power meter
and primary overcurrent protection device (distribution panel).
Measurement: The acquisition of input values into internal HiLogger memory or to a PC via
communications.
Recording : Storing measurement data on a CF card, USB flash drive or on a PC via data
communication.

Operating Precautions
6
Follow these precautions to ensure safe operation and to obtain the full benefits of
the various functions.
• Before using the HiLogger the first time, verify that it operates normally
to ensure that no damage occurred during storage or shipping. If you
find any damage, contact your dealer or Hioki representative.
• Before using the HiLogger, make sure that the insulation on the cables
is undamaged and that no bare conductors are improperly exposed.
Using the HiLogger in such conditions could cause an electric shock, so
contact your dealer or Hioki representative for replacements.
Operating temperature and humidity: 0 to 40°C at 80% RH or less (non-
condensating)
Temperature and humidity range for guaranteed accuracy: 23±5°C,
80%RH or less
Installation Precautions
Operating Precautions
Before Use
Instrument Installation
Avoid the following locations that could cause an accident or
damage to the instrument.
Exposed to direct sunlight
Exposed to high tempera-
ture
In the presence of corro-
sive or explosive gases
Exposedtowater, oil,other
chemicals, or solvents
Exposed to high humidity
or condensation
Exposed to strong electro-
magnetic fields
Near electromagnetic radi-
ators
Exposed to high levels of
particulate dust Subject to vibration
Near induction heating
systems
(e.g., high-frequency in-
duction heating systems
and IH cooking utensils)
• Avoid temperature changes around the terminal block. Especially avoid
directed airflow such as from an electric fan or air conditioner vent.Ther-
mocouple inputs are prone to measurement errors.
• When the HiLogger is moved to a location with significantly different
ambient temperature, allow at least 60 minutes for thermal equalization
before measuring.

Operating Precautions
7
Handling the Instrument
To avoid electric shock, do not remove the HiLogger's case. The
internal components of the HiLogger carry high voltages and may
become very hot during operation.
Touching any of the high-voltage points inside the HiLogger is very
dangerous.
Do not attempt to modify, disassemble or repair the HiLogger; as fire,
electric shock and injury could result.
To avoid damage to the HiLogger, protect it from physical shock when
transporting and handling. Be especially careful to avoid physical shock
from dropping.
This instrument may cause interference if used in residential areas. Such
use must be avoided unless the user takes special measures to reduce
electromagnetic emissions to prevent interference to the reception of radio
and television broadcasts..
Handling the Cords and Cables
• Avoid stepping on or pinching cables, which could damage the cable
insulation.
• To avoid breaking the cables, do not bend or pull them.
• To avoid damaging the power cord, grasp the plug, not the cord, when
unplugging it from the power outlet.
Before Turning Power On
Before turning the HiLogger on, make sure the supply voltage
matches that indicated on the AC adapter. Connection to an improper
supply voltage may damage the HiLogger or AC adapter and present
an electrical hazard.
When the power is turned off, do not apply voltage or current to the HiLog-
ger. Doing so may damage the HiLogger.
• After use, always turn OFF the power.
• Brief power interruptions of 40 ms or less will not cause this HiLogger to
malfunction. However, Longer interruptions may cause the HiLogger to
shut itself off, so consider local power conditions before installing, as
appropriate.
• To ensure that recording is not interrupted by power outages, you can
use the 9418-15 AC Adapter and Z1000 Battery Pack together.

Operating Precautions
8
Using the Battery Pack
Be sure to observe the following precautions. Incorrect handling may
result in liquid leaks, heat generation, ignition, bursting and other
hazards.
• Use only the Hioki Model Z1000 Battery Pack. We cannot accept
responsibility for accidents or damage related to the use of any
other batteries.
See: "2.2 Using the Battery Pack (Option)" (p. 30)
• To avoid the possibility of explosion, do not short circuit, disassem-
ble or incinerate battery pack.When storing the HiLogger, make
sure no objects that could short-circuit the connectors are placed
near them.
• The battery pack contains lye, which can cause blindness if comes
into contact with the eyes. Should battery liquid get into your eyes,
do not rub your eyes but rinse them in plenty of water and seek the
immediate attention of a physician.
• To avoid electric shock, turn off the power switch and disconnect
the cables before replacing the battery pack.
• After installing or replacing the battery pack, replace the battery
compartment cover and screw.
• Handle and dispose of batteries in accordance with local regula-
tions.
Observe the following to avoid damage to the HiLogger.
• Use the battery pack in an ambient temperature range of 0 to 40°C and
charge it in an ambient temperature range of 10 - 40°C.
• If the battery packs fails to complete charging within the stipulated time,
disconnect the AC adapter from the pack to stop charging.
• Consult your dealer or nearest service station should liquid leaks,
strange odor, heat, discoloration, deformation and other abnormal condi-
tions occur during use, charging or storage. Should these conditions
occur during use or charging, turn off and disconnect the HiLogger
immediately.
• Do not expose the HiLogger to water and do not use it in excessively
humid locations or locations exposed to rain.
• Do not expose the HiLogger to strong impacts and do not throw it
around.