HOMCOM 824-038V70 User manual

IN221000060V01_UK
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
824-038V70
1
MANUAL INSTRUCTION

Introduction
The
evaporative
air cooler
product
is
specially designed
with
both cooler and
heating functions.It can lower and warm outlet temperature and makes the air fresh
with
the use
if
equipped
ionizer and the air cooler cools the air
by
the
process
of
evaporation of water，which in turn helps reducing the green house effect.
The
evaporative
air cooler should not be used
in
enclosed
spaces.
It
is
recommended to place it near an open window to create a
“flow-through” effect and
experience the desired
cooling effect.
For the best
performance,
it
is advised to
fill
the water tank
with
water or ice
if
available when
using
this unit. This
product
is suitable for diversified climatic
environment for a relaxing and comforting atmosphere.
Technical Specification
Rated Voltage 220-240V
Rated Frequency 50Hz
General Power 80W
Water Tank Capacity 5L
Product Diagram
2

Operating the air cooler
Insert plug to the electrical outlet. Press the “On-Off” button to switch the unit“On”.
The LED indicator automatically shows the room temperature and shifts the fan to
stand by position. The function of the unit can be controlled via on board control
panel or by remote.
1. On/Off：Pressing the “On” button on the control panel or pressing the On/Off
button on the remote control will turn the unit ON at low speed. To switch back
the standby position, simply press the “Off” button on control panel or press the
“On/Off” button on remote control.
2. Speed: Press this key to choose between high, medium and low fan speed.
Each time the “Speed” button is pressed, an icon will appear on the LED screen
indicating the current speed level.
3. Wind：Press the “Wind” button to choose the type. Indicator light will display the
selected type of wind;
Normal：A continuous wind blow that can be adjusted to low，med and high
speed.
Natural：Nature setting provides a soft and comfortable environment with a
selection of low, medium and high speed.
Sleep：
1.WHEN SPEED HIGH，After 30 minutes of operation in the high-grade state of
natural wind, it will be transferred to the mid-range operation of natural wind, and
after 30 minutes, it will be transferred to the low-grade operation of natural wind,
and then continue to operate in the low-grade state of natural wind.
2.When the wind speed is in the medium range, it shall run in the medium range
of natural wind for 30min, and then turn to the low range of natural wind, and
continue to run in the low range of natural wind.
3.When the wind speed is low, continue to operate in the low natural wind speed.
4. Timer：
Press “Timer” button to set the fan between 1-12 hours, the indicator light
3

will show the selected time and will operate until the preset time passes.
Continuously press the button to your desired running time.
To cancel the timer, simply press the button until the indicator shows “00”.
5. Swing: Press “Swing” button to change the wind direction. The swing icon will
appear on the screen when the function is activated. Press the button again to
stop the oscillation.
6. Cool：Press this key to active the air cooler function. Water pump will take the
water from the tank and pour it onto the cooling pad. Cooling pad absorbs the
heat of the water and evaporated air is blown out through the fan. The cool
breeze by the cooler drops the temperature and creates a relaxing cooling effect.
Caution：If the water level is low or there is no water in the tank, do not activate
the “Cooler ” function. Check first the water level and add clean water if needed,
also to replace the stale water. It is recommended to replace water in the tank at
least once in a week.
7. Remote：Remote control operates withone CR2025 batteries.
Direct the remote control to the control panel of the evaporative air cooler. If
remote control is not working, first check the batteries. Replace them if needed.
If you are not going to use it for a long time, take out the batteries to prevent
damages that may occur due to battery leakage.
Operating the water tank
Check the level of water in the tank frequently. Be sure that water level is not below
the “MIN” marking which is located on the water tank. Activating the “Cool” function
with insufficient amount of water may cause malfunction of the water pump and
warranty of your product will be void.
Before refilling water, turn your unit to “Off” position by pressing the switch located at
the back panel and unplug the power cord.
Using the ice boxes
In order to increase the cooling effect of your fan, you can use ice boxes which are
included with the unit. Before using, place them in the freezing compartment of your
refrigerator for a few hours. Then place them into the large section of the tank and
add water reaching “MAX” level. Utilizing ice boxes drops the temperature of the air
flow which will create more effective cooling effect.
Safety Precautions
1. Make sure this appliance and the power cord is not damaged before operating.
In case of damage, please consult your authorized technical service.
2. Unplug the power cord plug before taking out the water tank.
3. Do not insert any objects to the ventilation or exhaust opening for this may
damage the product and could cause and electrical shock or fire.
4. Do not operate your unit with a cover on it as this may result to overheat and
motor damage.
4

5. The plug must be removed from the electrical outlet when not in use and before
moving, installing, uninstalling and cleaning.
6. Do not add any chemical or metal ingredients into the water tank. These
materials are dangerous and may cause problems.
7. Be careful not to expose infant and elder directly to the air cooler for a long time.
8. This appliance should be used under the rated voltage and frequency as
indicated in rating label.
9. This appliance is not intended for use of persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance.
10.Do not use your air cooler in or around water may cause electric shock and risk
of fire.
11.Do not pull while the power is on. Always ensure that the plug is fully inserted
into the electrical outlet before operating.
12.Do not attempt to disassemble, repair or modify this appliance for the warranty
will be void if repair is carried out by unauthorized person/services.
13.Do not leave your unit under direct sunlight for a long time.
14.Before using the evaporative air cooler, always ensure that it contains water.
Clean the tank with fresh tap water every two weeks.
Cleaning and Maintenance
Dusts may accumulate in the dust filter or cooling pad after some time and may
affect the cooler’s function. Therefore it is recommended to clean your evaporative
cooler regularly. Below are written steps on how to clean this unit；
Turn off the air cooler and unplug the power cord before beginning to clean.
1. Dust Filter
To remove the dust filter, Use mild cleaning agent and soft brush in removing the
dust and dirt on the filter. When done, first attach the bottom part of filter then push
the upper part to secure it.
2. Cooling Pad
After removing the dust filter you can see the cooling pad. Press the lock in the
middle and gently pull out the pad. Use a clean cloth or soft brush to remove dust
and dirt from the pad. Rinse with clean water if needed and leave open air dry.
Never use any harmful chemical solution for may cause damage to the pad.
Your cooler takes water from narrow section of the tank and pumps it on the cooling
pad. The water flowing through the cooling pad goes down to the large section of the
tank. The cycle results to absorption of dust and dirt in the air which makes the air
safer and fresher to breathe. The filter that is located at the middle portion of the
tank cleanses the water that passes through it and should be attached to its place
upon use of the unit.
5

3. Clean the water pump:
1.Remove the foam
around the pump 2.Secure the pump to the trough at the
bottom of the tank
3.Rotate the tablet onto
the water pump to
secure the water pump
6

7