HOMCOM 824-012V70 User manual

INTRODUCTION MANUAL
FAN
VENTILATUR
VENTILATOR
VENTILATION
MODEL: 824-012V70
MADE IN CHINA
TOWER FAN,220-240V~ 50Hz
NOTE: Please read the manual carefully before using
IMPORTANT SAFETY INSTRUCTIONS
EN
C000000

When using electric devices, basic safety precautions
must be observed. To avoid the risk of burns, electric
shocks, fire, and/or personal injury, please read the instruction
manual carefully before using the device, and observe all of
the instructions during the operation of the device.
GENERAL GUIDELINES
• Electronic devices are not toys! Keep children away from
the device!
• Only use the devices for its intended purpose.
• The device is only suitable for use in private households
and not for commercial use.
• Do not leave the device unsupervised while in use or
connected to the mains.
• Switch off the device if it is not in use, in the event of
malfunctions and for cleaning, and also remove the power
plug.
• Do not carry the device by the power cord.
• Keep the device clean and dust-free.
• Never use the device outdoors.
• Check the device regularly for signs of visible damage. Do
not use the device if you have determined damage, if the
device has fallen down or if it does not function properly. Do
not attempt to repair the device yourself.
• Repairs are only allowed to be carried out by qualified
specialists.
• The power point must be located near to the device so that
the plug can be removed easily in an emergency.
HAZARDS DUE TO ELECTRIC CURRENT
• The voltage stated on the name plate of the device must
agree with the voltage of your mains electricity network.
• Only connect the device to a power socket that has been
installed properly. Do not use a power strip or an extension
cable.
• Never operate the device using a timer or another remote
contract device.

• Never touch the device, the power cable and the plug with
damp or wet hands or if you are standing on wet ground.
• Do not place the power cord in the sink.
• Do not immerse in water.
• Immersing the device in water or other fluids leads to a
risk to life of electric shock!
• Keep the device, the power cable and plug away from hot
surfaces, naked flames, direct sunlight and sharp edges.
When using the device make sure that the cable is not
jammed (e.g. in doors).
• When you pull the plug out of the power socket, always pull
on the plug and never on the cable.
• If the power cable of this device is damaged it has to be
replaced by a correspondingly qualified person to prevent
hazards. The same applies to the plug.
HAZARDS TO PEOPLE
• These devices can be used by children aged 8 years and
above and by people with reduced physical, sensory or
mental capabilities or a lack of experience and/or
knowledge, if they are supervised or instructed in the safe
use of the product and understand the hazards involved.
Children must not play with the appliance.
• Cleaning and maintenance of the product must not be
performed by children.
• Children do not recognise the hazards which can arise
when handling electrical devices. Keep children away from
the device. Pay particular attention when using the device if
children are in the vicinity!
• Keep the packaging materials such as plastic bags and
polystyrene parts out of the reach of children. Danger of
suffocation!
• When laying the cable make sure that it cannot become a
tripping hazard.
• Make sure that the device itself cannot be tripped over.
ARTICLE-SPECIFIC HAZARDS

• Make sure that the device isn't dirty and that it is assembled
correctly
• Never operate the appliance on uneven surfaces or in the
vicinity of steps. Avoid tipping the device over when it is in
use (e.g. if there are borders on the floor).
• The pedestal fan may only be used, if it is fully assembled.
Check all screw / plug connections at regular intervals. Re-
tighten loose screws and ensure that plug connections are
properly adjusted.
OVERVIEW OF APPLIANCE
1. Air outlet grating
2. Holder
3. Time
4. Speed
5. Mode
6. Oscillation
7. ON/OFF
8. Power plug
9. Stand
10. Screws
11. Remote control
ASSEMBLING THE STAND
1. Take all of the appliance parts out of the packaging and remove all packaging
materials and inserts.
2. Turn the fan upside down so that you can look at the holder (2). (Fig.1).
3. Put the part.1 (Fig.2) of the stand (9) , and use 1 piece of screw to tight up,
see the methods by (Fig.3).

4. Take the power cord to cross the part.2 (Fig.2) stand (9), and press it into the
outlet hole.
5. Put the part.2 of the stand(9), (Fig.2), and press it into the part.1 (Fig.2) ,use
2 pieces of screw to tight up, see the methods by (Fig.4).
Fig. 1: Fig. 2:
Fig. 3: Fig. 4:
HANDLING THE APPLIANCE
POWER
• Press the button of ON/OFF (7), to select power on / off the appliance.
SPEED
• Press the button of ON/OFF (7) , to power on the appliace.
• Press the button of Speed (4), to select the fan speed.
• 3 speed for select: (Low - Mid - High)

MODE
• Press the button of ON/OFF (7) , to power on the appliace.
• Press the button of MODE (5), to select the fan mode.
• 3 mode for select: (NORMAL / NATURE / SLEEP).
• The default mode is NORMAL, and the SLEEP/NATURE mode with the
indicator be light up.
TIMER (0.5 - 7.5 HOURS)
• Press the button of ON/OFF (7) , to power on the appliace.
• Press the button of TIMER (3) to the desired time period (0.5-7.5
Hours)
• It will now remain in operation until the selected period of time runs out.
• After the timer runs over , the device will turn off.
OSCILLATION
• Press the button of ON/OFF (7) , to power on the appliace.
• Press the button of OSCILLATION (6), appliance will swing from Left to Right.
REMOTE CONTROL
• All the function above can be setting by remote control
CLEANING AND MAINTENANCE
Before cleaning the appliance always disconnect the power plug from
the receptacle.
• The appliance, the power cord and the power plug should not be immersed
in water or other liquids when you are cleaning them. Clean them with a dry
cloth.
• If it is very dirty, the outside of the appliance can be wiped carefully with a
moist cloth and then dried carefully. Make sure that no moisture penetrates
into the interior of the appliance.
• Do not use any harsh cleaners, steel brushes, scouring powder or other hard
objects to clean the appliance as these can cause scratches on the surfaces.
• Clean the appliance regularly.
• Never use solvents, benzene or oil-based cleaners as these can damage the
housing.
• Re-tighten visible screw connections on the appliance regularly in order to
ensure that the device is functioning properly.

DISPOSAL
Used electric household devices
1. If you do not want to use your electrical appliance any longer, return
it
free of charge to a recycling depot for used electric appliances.
2. Used electric devices do not belong in the household garbage
(see symbol).
Further disposal instructions
1. Return the electrical appliance in such a condition that its later re-
use or recycling is not adversely affected. Batteries must be
removed in advance and the destruction of parts which contain fluids
must be avoided.
2. Electrical appliances can contain harmful substances. Improper
handling or damage to the appliance can lead to health problems or
water or ground contamination, when the appliance is recycled later.
SPECIFICATION
PRODUCT: TOWER FAN
MODEL: 824-012V70BK/012V90/012V70S
POWER:40W
VOLTAGE: 220-240V~ 50Hz
Made In China
All images serve as illustrations only and do not always show exact
representations of the device.
All rights reserved.